In the realm of household appliances, the dishwasher stands as an indispensable tool, silently toiling away to keep our dishes sparkling clean. However, even the most reliable machines can occasionally encounter glitches that disrupt their seamless operation. One common issue that can arise is the need to reset your GE dishwasher. Whether it’s due to power outages, error codes, or simply unresponsive controls, knowing how to reset your dishwasher can save you valuable time and frustration.
Resetting your GE dishwasher is a relatively straightforward process, but it’s important to understand the specific steps involved based on your model. Different dishwasher models may have slightly different procedures, so it’s always advisable to consult your owner’s manual for the most accurate instructions. However, in general, most GE dishwashers follow a similar reset sequence.
To begin the reset process, locate the “Start” or “Power” button on the dishwasher’s control panel. Press and hold the button for approximately 5 to 10 seconds, or until you hear a beep or see the indicator lights on the panel flashing. Once the dishwasher has entered reset mode, you can release the button. After a brief interval, typically 1 to 2 minutes, the dishwasher will automatically resume its normal operation, and any error codes or glitches that triggered the reset should be cleared.
Unplug the Dishwasher
Unplugging the dishwasher is a simple but effective way to reset it. By cutting off the power supply, you can clear any errors or glitches that may have occurred.
To unplug the dishwasher, follow these steps:
- Locate the dishwasher’s power cord. It is usually plugged into an outlet under the sink or behind the dishwasher.
- Grasp the power cord firmly and pull it straight out of the outlet.
- Wait at least 60 seconds before plugging the dishwasher back in.
After you have unplugged the dishwasher, you may need to reset the circuit breaker or fuse that powers the dishwasher. To do this, locate the circuit breaker or fuse panel in your home and flip the breaker or fuse that corresponds to the dishwasher to the “off” position, then back to the “on” position.
Once you have reset the circuit breaker or fuse, plug the dishwasher back in and turn it on. The dishwasher should now be reset and functioning properly.
Replug the Dishwasher
A simple reset method that often resolves minor issues is to unplug the dishwasher from the power outlet and wait at least 60 seconds before plugging it back in. This allows the dishwasher’s control board to reset and clear any temporary malfunctions. Here are detailed steps on how to perform this reset:
Check the Dishwasher’s Display
Many GE dishwashers have a digital display that shows the status of the dishwasher and any error codes. If the dishwasher is not starting or is not working properly, checking the display for error codes can help you troubleshoot the problem. To check the display, simply open the dishwasher door and look at the control panel. The display will usually be located in the center of the control panel and will show a series of numbers or letters.
If the display shows an error code, you can consult the dishwasher’s user manual to find out what the error means and how to fix it. Some common error codes include:
| Error Code | Meaning |
|---|---|
| E1 | Door is not closed properly |
| E2 | Water supply is not turned on |
| E3 | Drain hose is clogged |
If the dishwasher’s display does not show an error code, it may be necessary to reset the dishwasher. To reset the dishwasher, follow these steps:
- Unplug the dishwasher from the power outlet.
- Wait 60 seconds.
- Plug the dishwasher back into the power outlet.
- Select the desired wash cycle and start the dishwasher.
Resetting the dishwasher will clear the dishwasher’s memory and may resolve any minor problems that are preventing the dishwasher from working properly. If the dishwasher still does not start or is not working properly after resetting it, you may need to call a qualified appliance repair technician.
Reset Using a Diagnostic Mode
This method is applicable to newer GE dishwashers equipped with a diagnostic mode feature. Follow these steps carefully:
- Press the “Cancel/Drain” button for about 4 seconds until the dishwasher beeps.
- Within 15 seconds, press the “Start/Resume” button and hold it for 6 seconds until it beeps again.
- Release the “Start/Resume” button.
- Press the “Diagnostic” button (usually located inside the door) once.
- Wait for the diagnostic lights to flash rapidly.
- Press the “Start/Resume” button again.
- The diagnostic lights will now flash slowly.
- Press the “Diagnostic” button repeatedly until the “F:08” error code is displayed.
- Press and hold the “Start/Resume” button for 5 seconds until the dishwasher beeps twice and the lights turn off. The reset is complete.
| Error Code | Description |
|---|---|
| F:01 | Float switch malfunction |
| F:02 | Door switch malfunction |
| F:03 | Heating element malfunction |
| F:04 | Thermistor malfunction |
| F:05 | Pressure switch malfunction |
| F:06 | Water leak detected |
| F:07 | Control board malfunction |
| F:08 | Reset mode |
How To Reset Ge Dishwasher
If your GE dishwasher is not working properly, you may need to reset it. Resetting the dishwasher will clear the memory and restore it to its default settings. Here are the steps on how to reset a GE dishwasher:
- Unplug the dishwasher from the power outlet.
- Wait 60 seconds.
- Plug the dishwasher back into the power outlet.
- Open the dishwasher door.
- Press and hold the “Start/Cancel” button for 5 seconds.
- The dishwasher will beep and the lights will flash.
- Close the dishwasher door.
- The dishwasher will reset and start running.
People Also Ask About How To Reset Ge Dishwasher
How do I know if my GE dishwasher needs to be reset?
There are a few signs that may indicate that your GE dishwasher needs to be reset. These include:
- The dishwasher is not starting.
- The dishwasher is not draining properly.
- The dishwasher is not washing the dishes properly.
- The dishwasher is making strange noises.
- The dishwasher is displaying an error code.
What happens when I reset my GE dishwasher?
When you reset your GE dishwasher, the memory will be cleared and the dishwasher will be restored to its default settings. This will erase any custom settings that you have made, such as the wash cycle, the water temperature, and the rinse aid setting.
How often should I reset my GE dishwasher?
There is no need to reset your GE dishwasher on a regular basis. However, you may need to reset it if you experience any problems with the dishwasher.
