7 Easy Steps on How to Use the Bissell Proheat Carpet Cleaner

Image of the Bissell Proheat Carpet Cleaner

$title$

The Bissell Proheat Carpet Cleaner is a powerful and effective machine that can remove dirt, stains, and allergens from your carpets. It uses a combination of hot water, cleaning solution, and powerful suction to deep clean your carpets, leaving them looking and smelling fresh and new. The Bissell Proheat Carpet Cleaner is easy to use, and it comes with a variety of attachments that allow you to clean different types of carpets and surfaces.

To use the Bissell Proheat Carpet Cleaner, first fill the clean water tank with hot water and add the cleaning solution. Then, attach the appropriate attachment to the machine and begin cleaning. The Bissell Proheat Carpet Cleaner has a variety of settings that allow you to customize the cleaning process to suit your needs. You can choose from a variety of cleaning modes, including a deep clean mode, a quick clean mode, and a pet stain mode. You can also adjust the water temperature and the suction power to suit your needs.

Unboxing and Assembly

Step 1: Unpack the Bissell Proheat Carpet Cleaner

Upon unboxing, you will find the following items:

Bissell Proheat Carpet Cleaner
User’s Guide
Cleaning Solution Sample
Trial Size of Stain Remover
Accessory Storage Bag

Step 2: Assemble the Carpet Cleaner

The Bissell Proheat Carpet Cleaner comes pre-assembled. Simply unpack it and connect the power cord.

Step 3: Fill the Clean Water Tank

Locate the clean water tank, typically on the back of the machine. Remove the tank and fill it with hot tap water to the indicated fill line. Replace the tank and ensure it is securely locked.

Step 4: Add Cleaning Solution

Add the provided cleaning solution sample to the clean water tank. Follow the manufacturer’s instructions for proper dilution.

Prepping the Carpet

Before you start using your Bissell ProHeat carpet cleaner, it’s important to prep the carpet. This will help to ensure that the cleaner works effectively and that your carpets are left looking their best.

Step 1: Remove Obstacles

The first step is to remove any obstacles from the carpet, such as furniture, toys, or cords. This will help you to move the cleaner around the carpet freely and avoid any accidents.

Step 2: Vacuum the Carpet

Next, you’ll need to vacuum the carpet to remove any loose dirt or debris. This will help to prevent the dirt from being tracked back onto the carpet after you’ve cleaned it.

Carpet Type	Vacuuming Frequency
Low-traffic areas	Once a week
Medium-traffic areas	Twice a week
High-traffic areas	Daily

Step 3: Pre-treat Stains

If there are any stains on the carpet, you’ll need to pre-treat them before cleaning. This will help to loosen the stains and make them easier to remove. To pre-treat stains, apply a carpet cleaning solution to the stain and allow it to sit for the amount of time specified on the solution’s label. Blot the stain with a clean cloth or paper towel to remove any excess solution.

Post-Cleaning Maintenance

1. Rinse the Water Tank

After cleaning, empty the dirty water tank and rinse it with clean water to remove any remaining residue.

2. Clean the Nozzle

Inspect the nozzle for any debris or hair buildup. If necessary, use a brush or tweezers to remove any obstructions.

3. Rinse the Brushes

If your carpet cleaner has rotatable brushes, rinse them thoroughly with warm water to remove dirt and prevent buildup.

4. Clean the Filter

Check and clean the filter as per the manufacturer’s instructions. A clean filter ensures optimal cleaning performance.

5. Store the Machine Properly

Before storing the carpet cleaner, empty both water tanks, unplug the machine, and wrap the cord securely. Store it in a cool, dry place.

6. Deep Clean Regularly

For optimal carpet hygiene, it’s recommended to deep clean your carpets every 6-12 months, depending on foot traffic and pet presence. Deep cleaning removes embedded dirt and allergens, extending the life of your carpets.

Carpet Traffic	Cleaning Frequency
Light to Moderate	Every 6-9 months
Heavy	Every 3-6 months
Pets Present	Every 3 months or more frequently

Troubleshooting Common Issues

1. Carpet is not getting clean

Make sure the correct cleaning solution is being used. Check if the water tank is full and the cleaning solution is mixed according to the manufacturer’s instructions. Also, ensure the brushes are not worn or clogged with debris.

2. Machine is leaking water

Inspect all hoses and connections for leaks. Tighten any loose connections and replace any damaged hoses. Ensure the water tank is not overfilled and the drain hose is securely attached.

3. Machine is not picking up water

Check if the drain hose is kinked or blocked. Clean the hose and ensure it is positioned correctly. Also, verify that the suction motor is functioning properly.

4. Machine is making loud noises

Turn off the machine and unplug it. Check for any foreign objects that may have become lodged in the brushes or suction motor. Clean or replace any damaged parts.

5. Machine is not turning on

Make sure the machine is properly plugged into a working outlet. Check the power cord for damage and replace it if necessary. Try resetting the machine by unplugging it and plugging it back in.

6. Brushes are not rotating

Turn off and unplug the machine. Check for any obstructions in the brush area. Remove any debris and ensure the brushes are properly installed. Replace worn or damaged brushes.

7. Cleaning solution is not dispensing

Problem	Possible Cause	Solution
Solution tank not filled	Empty solution tank	Fill solution tank with cleaning solution
Solution line clogged	Clogged solution line	Clear clogs from solution line
Solution pump malfunctioning	Broken or damaged solution pump	Replace solution pump

Tips for Optimal Performance

1. Prepare Your Carpet

Vacuum your carpet thoroughly to remove any loose dirt or debris. Remove any furniture or other items from the carpet area to be cleaned.

2. Fill the Solution Tank

Fill the solution tank with the recommended amount of Bissell ProHeat cleaning solution. Never use other cleaning solutions or chemicals, as this can damage the cleaner.

3. Prime the Machine

Before starting the cleaning process, prime the machine by holding down the spray trigger and moving it back and forth over a small section of carpet.

4. Begin Cleaning

Slowly move the cleaner forward and backward over the carpet area, overlapping the strokes slightly. Avoid over-saturating the carpet by releasing the spray trigger only when necessary.

5. Extract Dirty Water

As you clean, the dirty water will be extracted into the recovery tank. Empty the recovery tank as needed to prevent overflow.

6. Rinse and Dry

Once the carpet is clean, rinse it thoroughly by filling the water tank with clean water and running the machine over the area again without any cleaning solution. Allow the carpet to air dry completely.

7. Empty and Clean the Machine

After use, empty both the solution and recovery tanks, and clean the machine thoroughly according to the manufacturer’s instructions. This will help maintain the machine and extend its lifespan.

8. Preventative Maintenance

To ensure optimal performance of your Bissell ProHeat Carpet Cleaner, follow these additional tips:

Frequency	Action
Monthly	Clean the brushroll to remove any hair or debris that may accumulate.
Quarterly	Empty and clean both solution and recovery tanks thoroughly.
Annually	Have the cleaner professionally serviced to ensure proper function.

Safety Precautions

Before using the Bissell Proheat Carpet Cleaner, it’s essential to follow these safety precautions to ensure a safe and effective cleaning experience:

1. Read the Instructions

Thoroughly read the user manual provided with the carpet cleaner to familiarize yourself with its features, assembly, and operation. Understanding the instructions will help you use the machine safely and effectively.

2. Wear Appropriate Clothing

Wear comfortable clothing that allows for easy movement and protects you from splashes or spills. Avoid wearing loose or flowing clothing that could get caught in the machine.

3. Clear the Area

Remove any obstacles from the area to be cleaned, such as furniture, rugs, or toys. This will provide a safe and unobstructed work environment.

4. Test in an Inconspicuous Area

Before applying the cleaning solution to the entire carpet, test it in a small, inconspicuous area to ensure it doesn’t cause any damage or discoloration.

5. Use Only Recommended Solutions

Use only cleaning solutions specifically designed for use with the Bissell Proheat Carpet Cleaner. Avoid using bleach or other harsh chemicals, as these can damage the machine or your carpets.

6. Keep Pets and Children Away

Keep pets and children away from the carpet cleaner and cleaning solutions during operation. The machine can be noisy and may release steam, which could be startling or harmful.

7. Avoid Overwetting

Do not overwet the carpets. Excessive moisture can damage the carpets or cause mold growth. Follow the recommended solution-to-water ratio and use the machine’s suction feature thoroughly to remove excess water.

8. Rinse Thoroughly

After cleaning, rinse the carpets thoroughly with clean water to remove any remaining cleaning solution or dirt particles. This will help prevent residue buildup and ensure a fresh and clean carpet.

9. Unplug After Use

Always unplug the carpet cleaner from the electrical outlet when not in use. This will prevent accidental activation or electrical shock.

How to Use the BISSELL ProHeat Carpet Cleaner

The Bissell ProHeat carpet cleaner is a powerful and effective machine for cleaning carpets and upholstery. It uses a combination of hot water, cleaning solution, and suction to remove dirt, stains, and odors. To use the Bissell ProHeat carpet cleaner, follow these steps:

Fill the clean water tank. Fill the clean water tank with hot water, but do not overfill it.
Add cleaning solution. Add the recommended amount of Bissell carpet cleaning solution to the clean water tank.
Attach the cleaning head to the machine. Connect the cleaning head to the base of the machine.
Plug in the machine. Plug the Bissell ProHeat carpet cleaner into an electrical outlet.
Turn on the machine. Press the power button to turn on the machine.
Select the desired cleaning mode. Choose the appropriate cleaning mode for the type of carpet or upholstery you are cleaning.
Start cleaning. Slowly push the machine forward over the carpet or upholstery, using the cleaning head to remove dirt and stains.
Rinse the carpet or upholstery. After cleaning, rinse the carpet or upholstery with clean water. To do this, fill the clean water tank with clean water and press the rinse button.
Empty the dirty water tank. After rinsing, empty the dirty water tank. To do this, detach the dirty water tank from the machine and dump the water into a sink or toilet.