Converse low tops, the quintessential sneakers that have transcended generations and fashion trends, hold a special place in the hearts of sneaker enthusiasts worldwide. With their timeless appeal and effortless style, these iconic kicks can complement any outfit, from casual streetwear to smart-casual ensembles. However, mastering the art of tying Converse low tops can be a perplexing task for some, especially for those new to the world of lace-up footwear. Fear not, fellow sneaker aficionados, for this comprehensive guide will unravel the mysteries of Converse low-top lacing techniques, empowering you to achieve a secure and stylish fit every time you lace up your beloved kicks.
Before embarking on the lacing journey, it’s essential to gather the necessary tools: a pair of Converse low tops, a sturdy pair of laces (the length will depend on the number of lace holes in your shoes), and a dash of patience. With these tools at your disposal, you’re ready to dive into the art of Converse low-top lacing. So, sit back, relax, and let’s embark on this lacing adventure together.
The most common lacing method for Converse low tops is the traditional criss-cross lacing technique. To begin, insert the laces through the bottom two lace holes on the inside of each shoe, ensuring that the laces are evenly distributed. Next, cross the laces over one another and thread them through the corresponding lace holes on the outside of the shoe. Repeat this criss-cross pattern until you reach the top lace holes. At this point, you can either tie the laces in a traditional bow or opt for a more secure double knot to ensure your shoes stay snugly in place throughout the day.
Secure the Laces
-
Lace the shoes: Begin by threading one lace end through the bottom right eyelet, then up through the bottom left eyelet. Repeat this step for all of the remaining eyelets, finishing by threading the left lace end down through the top left eyelet.
-
Cross the laces: Cross the right lace over the left lace, forming an "X" shape.
-
Tuck the laces: Take the right lace and tuck it under the left lace, looping it around the back of the left lace.
-
Pull the laces tight: Pull both laces tight to secure the first knot.
-
Double-knot: Repeat steps 2-4 to create a second knot, which will make the laces more secure.
Create a Cross
1. Start by forming a straight line with one lace end.
2. Take the other lace end and wrap it perpendicularly over the first one, forming a cross shape. This creates the base for tying the laces.
3. Hold the left lace (from the cross shape) in your left hand and the right lace in your right hand.
4. Take the right lace and pass it under the left lace.
5. Bring the right lace back up and over the left lace.
6. Tighten the knot by pulling on both lace ends. Repeat this process on the other side of the cross.
7. Now, you have two parallel vertical laces. These laces will be used to secure the tongue of the shoe.
8. Take the lace on the left and wrap it over the lace on the right, forming a small loop. Ensure the loop is snug enough to stay in place.
9. Take the lace from the loop and insert it back into the hole it came from.
10. Pull the lace tightly, making sure the loop stays in place. Do the same on the other side with the other lace.
11. Now, your Converse will be securely tied, with the laces locked in place. The loop on each side allows for easy adjustment as needed.
Form an Under Lace
1. Lace the shoes up to the second-to-last hole.
2. Take the left lace and pass it over the right lace.
3. Now, take the right lace and pass it under the left lace, pulling it up through the loop you just created.
4. Tighten the knot by pulling on both laces evenly.
5. Repeat steps 3-4 for the last hole.
6. Trim any excess lace.
Tips
– If you want a more secure knot, you can double-knot the laces.
– To create a decorative knot, you can try the “bunny ears” knot or the “bow tie” knot.
– You can also use different colors of laces to create a unique look.
Table of Knot Types
| Knot Type | Description |
|---|---|
| Standard Knot | The most common type of knot, used for everyday use. |
| Double Knot | A more secure knot, used for activities where the laces need to stay tied. |
| Bunny Ears Knot | A decorative knot, used to add a playful touch to your shoes. |
| Bow Tie Knot | A decorative knot, used to create a more elegant look. |
Lace-Crossing Variation
This variation adds a touch of uniqueness to your laces. Instead of crossing them traditionally, you’ll create an intricate crisscrossed pattern.
To do this:
- Thread both laces through the bottom eyelets, one from each side.
- Cross the left lace over the right and push it through the second eyelet on the right side.
- Cross the right lace over the left and push it through the second eyelet on the left side.
- Continue this crisscrossing motion, alternating between the left and right laces, working your way up the eyelets.
- Once you reach the top eyelets, double knot the laces as usual.
| Traditional Lacing | Lace-Crossing Variation |
|---|---|
 |
 |
The lace-crossing variation creates a visually striking pattern that adds a touch of style to your Converse low tops. Experiment with different lace colors or patterns to further customize your look.
Tongue-Tuck Method
This method conceals the tongue of the shoe, creating a clean and sleek look. Here’s a step-by-step guide:
- Push the tongue into the shoe: Gently push the tongue all the way to the toe box, pressing it down as much as possible.
- Lace the shoes loosely: Lace the shoes up as normal, but leave some slack in the laces.
- Create a loop: Make a loop with one of the laces, allowing it to hang down outside the shoe.
- Tuck the loop under the lace: Take the loop you created and tuck it under the lace that is running across the top of the shoe.
- Tighten the laces: Pull on the lace that is connected to the loop to tighten the laces. As you tighten, the tongue will continue to tuck itself under the laces.
- Make a knot: Tie the laces in a double knot to secure them.
**Benefits of the Tongue-Tuck Method:**
|
Clean and minimalist appearance |
Prevents the tongue from slipping while walking |
|
Suitable for a variety of shoe styles |
Easy to do and adjust |
Invisible Loopout
This method creates a sleek and polished look, concealing the excess lace within the shoe’s tongue. Start by threading the lace through the bottom eyelet on one side of the shoe, then crisscross it to the top eyelet on the opposite side. Now, make a small loop with the lace, passing it through the hole in the tongue. Pull the lace through the loop, creating a small knot. Repeat this process on the other side of the tongue, resulting in two identical loops. Next, cross the laces over each other and pass them through the first pair of eyelets above the tongue. Continue lacing up the shoe as usual. Finally, tuck the excess lace into the loops created within the tongue, hiding them from view.
Loose-Lacing for Comfort
Loose-lacing is a great way to keep your feet comfortable while wearing Converse low tops. Here’s how to do it:
- Start by lacing the shoes as you normally would, but leave the laces a little loose.
- Once you reach the top of the shoe, cross the laces over each other and pull them through the next two eyelets.
- Repeat this step until you reach the end of the laces.
- Pull the laces tight, but not too tight.
- Tie the laces in a double knot.
Here’s a more detailed breakdown of step 7:
- Pull the laces through the top two eyelets on one side of the shoe.
- Cross the laces over each other and pull them through the next two eyelets on the other side of the shoe.
- Repeat this step until you reach the end of the laces.
- Pull the laces tight, but not too tight.
- Tie the laces in a double knot.
This method will create a loose, comfortable fit that will keep your feet from feeling cramped or constricted.
Color Blocking Technique
This technique involves using a variety of laces in different colors to create a unique and eye-catching look. You can use up to three different colors, but two is usually sufficient. To begin, lace up your shoes with your first color using the classic lace-up method. Then, take your second color and thread it through the holes on the opposite side of the shoe, alternating between the holes you used for the first color. Finally, if using a third color, lace it through the remaining holes, again alternating between the sides. This technique is perfect for adding a pop of color to your outfit and making your shoes stand out.
Number 8 Variant
This variant of the classic lace-up method involves using a lace that is twice as long as the regular lace. Start by lacing up your shoes as you would with the regular method, but only go through each hole once. Once you reach the top of the shoe, thread the lace back down through the holes you just used, creating a double loop through each hole. Continue this process until you reach the bottom of the shoe, then tie off the lace as usual. This variant creates a more intricate and stylish look, and it also provides a more secure fit.
| Steps for Number 8 Variant: |
|---|
| 1. Lace up the shoes as usual, but only go through each hole once. |
| 2. Thread the lace back down through the holes you just used, creating a double loop through each hole. |
| 3. Continue this process until you reach the bottom of the shoe, then tie off the lace as usual. |
Vertical Bar Lacing
Vertical bar lacing, sometimes known as “straight lacing,” is a classic and versatile lacing method that creates a clean and organized appearance. It’s perfect for low-top Converse shoes, as it provides a secure fit without looking too bulky.
Steps
1. Start by lacing the bottom two eyelets on each side of the shoe, feeding the lace through from the outside.
2. Cross the laces over each other and lace them through the next two eyelets up, again starting from the outside.
3. Repeat this process until you reach the top of the shoe.
4. On the final row, cross the laces over each other and then lace them through the last two eyelets, again starting from the outside.
5. Pull the laces tight and tie them in a double knot.
Tip
To achieve a more secure fit, use a zigzag pattern instead of a straight line when lacing. This will create additional friction between the laces and the eyelets, preventing the shoe from loosening up.
Variations
There are several variations of vertical bar lacing that you can experiment with:
| Variation | Description |
|---|---|
| Offset lacing | Lace the shoes slightly off-center to create a more asymmetrical look. |
| Two-tone lacing | Use different laces on each side of the shoe for a pop of color. |
| Hidden lacing | Lace the shoes behind the tongue for a cleaner, more streamlined appearance. |
Diamond Lacing
Diamond lacing is a stylish and secure way to lace your Converse low tops. It’s perfect for adding a bit of flair to your shoes, and it’s also a great way to prevent your laces from coming undone.
To lace your Converse low tops using the diamond lacing method, follow these steps:
- Start by threading the laces through the bottom two eyelets on the inside of the shoe.
- Bring the laces up and cross them over each other, forming an “X” shape.
- Thread the laces through the next pair of eyelets on the outside of the shoe.
- Bring the laces back down and cross them over each other, forming another “X” shape.
- Thread the laces through the next pair of eyelets on the inside of the shoe.
- Bring the laces up and cross them over each other, forming another “X” shape.
- Thread the laces through the next pair of eyelets on the outside of the shoe.
- Bring the laces back down and cross them over each other, forming another “X” shape.
- Continue lacing the shoes in this manner until you reach the top.
- Tie the laces together in a double knot.
Here’s a table that summarizes the diamond lacing method:
| Step | Description |
|---|---|
| 1 | Thread the laces through the bottom two eyelets on the inside of the shoe. |
| 2 | Bring the laces up and cross them over each other, forming an “X” shape. |
| 3 | Thread the laces through the next pair of eyelets on the outside of the shoe. |
| 4 | Bring the laces back down and cross them over each other, forming another “X” shape. |
| 5 | Thread the laces through the next pair of eyelets on the inside of the shoe. |
| 6 | Bring the laces up and cross them over each other, forming another “X” shape. |
| 7 | Thread the laces through the next pair of eyelets on the outside of the shoe. |
| 8 | Bring the laces back down and cross them over each other, forming another “X” shape. |
| 9 | Continue lacing the shoes in this manner until you reach the top. |
| 10 | Tie the laces together in a double knot. |
How to Tie Converse Shoes Low Tops
Tying Converse shoes is a simple task that can be done in just a few steps. Low-top Converse shoes are a popular style of sneaker that can be worn for a variety of occasions. They are comfortable, stylish, and easy to care for. Learning how to tie them properly will help you get the most out of your shoes and keep them looking their best.
To tie Converse shoes low tops, follow these steps:
- Start by crossing the laces over each other, forming an “X” shape.
- Take the right lace and pass it over the left lace, then under the right lace.
- Take the left lace and pass it under the right lace, then over the left lace.
- Pull both laces tight to create a knot.
- Repeat steps 2-4 to create a second knot.
- Tuck the ends of the laces into the shoe.
Your Converse shoes are now tied securely. You can adjust the tightness of the laces by pulling them tighter or looser as needed.
People also ask
How do you tie Converse shoes with 6 holes?
To tie Converse shoes with 6 holes, follow the same steps as outlined above, but use the additional two holes to create a more secure knot. Cross the laces over each other at the top two holes, then pass the right lace over the left lace and under the right lace. Take the left lace and pass it under the right lace, then over the left lace. Pull both laces tight to create a knot. Repeat steps 2-4 to create a second knot. Tuck the ends of the laces into the shoe.
How do you tie Converse shoes with 8 holes?
To tie Converse shoes with 8 holes, follow the same steps as outlined above, but use the additional two holes to create a more intricate knot. Cross the laces over each other at the top two holes, then pass the right lace over the left lace and under the right lace. Take the left lace and pass it under the right lace, then over the left lace. Pull both laces tight to create a knot. Repeat steps 2-4 to create a second knot. Cross the laces over each other at the next two holes down, then pass the right lace over the left lace and under the right lace. Take the left lace and pass it under the right lace, then over the left lace. Pull both laces tight to create a knot. Repeat steps 2-4 to create a second knot. Tuck the ends of the laces into the shoe.
How do you tie Converse shoes without making a knot?
There are a few different ways to tie Converse shoes without making a knot. One method is to use a surgeon’s knot. To do this, cross the laces over each other, then pass the right lace over the left lace and under the right lace. Take the left lace and pass it under the right lace, then over the left lace. Pull both laces tight, but do not pull them all the way through. Instead, leave a small loop at the end of each lace. Take the right loop and put it through the left loop, then pull the left lace tight. Repeat with the left loop and right lace. Pull both laces tight to create a secure knot. Another method is to use a slip knot. To do this, make a loop with one lace, then pass the other lace through the loop. Pull the laces tight to create a knot. To untie the knot, simply pull on the end of one lace.
