Have you ever wanted to customize your knife or tactical tool, but didn’t know where to start? Paracord grips are a great way to add a personal touch to your gear, and they’re also incredibly useful. Not only do they provide a more comfortable grip, but they can also be used for a variety of other purposes, such as lashing down gear, creating a makeshift tourniquet, or even starting a fire. In this article, we’ll show you how to make a paracord grip that is both stylish and functional.
To make a paracord grip, you will need the following materials:
– Paracord (550 cord or similar)
– Scissors
– Lighter or heat source
– Measuring tape or ruler
– Masking tape or painter’s tape
– Optional: Heat shrink tubing
Once you have gathered your materials, you can begin the process of making your paracord grip. The first step is to measure and cut the paracord to the desired length. The length of the paracord will vary depending on the size of your knife or tool, so be sure to measure it carefully. Once you have cut the paracord, you can begin wrapping it around the handle of your knife or tool. Start by wrapping the paracord around the base of the handle, and then continue wrapping it up the handle, overlapping the previous wraps by about half of their width.
Preparing the Paracord for the Grip
Before you begin wrapping the paracord around the grip, it’s crucial to prepare it properly to ensure a tight and secure fit. Here’s a step-by-step guide to preparing the paracord:
Step 1: Measure and Cut the Paracord
Measure the length of the grip that you want to cover with paracord and add an extra 1 foot for knotting. Cut the paracord accordingly, ensuring you have enough to wrap around the grip and tie a knot at the end.
Step 2: Unravel and Separate the Strands
Unravel the paracord and separate the inner core strands from the outer sheath. You will have four inner core strands and a single outer sheath that encapsulates them. Keep the outer sheath intact, as it will be used to wrap around the grip.
Step 3: Unravel the Inner Core Strands
Unravel the four inner core strands and separate them from each other. Each inner core strand consists of multiple smaller strands twisted together. Carefully untwist these smaller strands to create a fluffy, fine structure.
Step 4: Reassemble the Inner Core Strands
Once the inner core strands are untwisted, reassemble them by twisting them together again. This time, twist them in the opposite direction to how they were originally twisted. This will give the strands added strength and prevent them from unraveling during the wrapping process.
| Inner Core Strand Color | Outer Sheath Color |
|---|---|
| Red, Blue, Green | Black |
| White, Yellow, Orange | Red |
How To Make A Paracord Grip
Paracord grips can be made from a length of paracord and a few simple knots. They are a great way to improve the grip on your favorite knife, flashlight, or other tool. Here are the steps on how to make a paracord grip:
- Cut a length of paracord that is three times the length of the handle you want to wrap.
- Tie a simple loop knot at one end of the paracord.
- Place the loop knot over the end of the handle and pull the paracord through the loop to create a slip knot.
- Tighten the slip knot so that the paracord is snug against the handle.
- Begin wrapping the paracord around the handle, overlapping each wrap by about 1/3.
- When you reach the end of the handle, tie a simple loop knot at the end of the paracord and pull the paracord through the loop to secure it.
- Trim any excess paracord and melt the ends to prevent fraying.
People Also Ask About How To Make A Paracord Grip
What kind of paracord should I use?
You can use any type of paracord for a paracord grip, but 550 paracord is the most common type. It is strong, durable, and available in a variety of colors.
How long should I make the paracord grip?
The length of the paracord grip will depend on the size of the handle you are wrapping. A good rule of thumb is to cut a length of paracord that is three times the length of the handle.
How do I finish the paracord grip?
You can finish the paracord grip by tying a simple loop knot at the end of the paracord and pulling the paracord through the loop to secure it. You can also melt the ends of the paracord to prevent fraying.
