Maintaining the cleanliness and functionality of your PUR water pitcher is crucial for ensuring the safety and quality of your drinking water. Regular cleaning and filter replacements are essential tasks that can significantly impact the taste, odor, and clarity of the water you consume. In this comprehensive guide, we will provide step-by-step instructions on how to effortlessly remove the PUR water filter from your pitcher, ensuring it functions optimally and delivers pristine, refreshing water every time.
Before embarking on this simple process, it’s imperative to gather the necessary materials. You’ll need a clean cloth or paper towels and a spare PUR water filter replacement to ensure a seamless transition. Additionally, ensure that your pitcher is empty before commencing the filter removal process. Once you have assembled these items, you can proceed with the filter removal process, which is remarkably straightforward and can be completed in just a few minutes.
Begin by firmly grasping the bottom of the filter and gently pulling it straight up. The filter should detach easily from the base of the pitcher. Once the filter is removed, dispose of it properly and avoid rinsing it, as this can damage the filtration system. Now, carefully insert the new PUR water filter into the base of the pitcher, ensuring it is securely in place. Finally, refill the pitcher with water and allow it to filter through the new filter before enjoying the purity of your freshly filtered water.
Identifying the Type of Filter
Knowing the type of filter you have is crucial for determining the correct removal procedure. Here are the common types of PUR water filters used in pitchers:
-
Basic Carbon Filter: These filters are typically white or gray and contain activated carbon to remove chlorine and other contaminants. They have a short lifespan and require frequent replacement.
-
Advanced Carbon Filter: These filters are similar to basic carbon filters but provide enhanced filtration capabilities. They often feature a combination of activated carbon and ion exchange resin to remove a wider range of impurities.
-
MineralCore Filter: This type of filter not only removes contaminants but also adds essential minerals back into the water. It contains a carbon core infused with calcium and magnesium for improved taste and hydration.
-
MAXION Filter: This premium filter combines activated carbon with a fine-mesh membrane to provide exceptional filtration performance. It effectively removes heavy metals, pharmaceuticals, and other emerging contaminants.
-
Lead Reduction Filter: As the name suggests, these filters are specifically designed to reduce lead levels in water. They contain a high-capacity lead sorbent that traps lead ions and prevents their ingestion.
| Filter Type | Appearance | Features |
|---|---|---|
| Basic Carbon | White or gray | Chlorine removal |
| Advanced Carbon | White or gray | Enhanced contaminant removal |
| MineralCore | White or blue | Mineral addition |
| MAXION | Black or gray | Exceptional filtration performance |
| Lead Reduction | White or blue | Lead removal |
Gathering Necessary Tools
To successfully remove a Pur water filter from your pitcher, you will need the following tools:
| Tool | Purpose |
|---|---|
| Empty pitcher | Holds water and filter |
| Clean cloth or paper towels | Wipes up spills |
| Screwdriver (optional) | Removes stubborn filters |
Ensure you have a clean and dry workspace before beginning the filter removal process. It is also advisable to place the pitcher on a non-slip surface to prevent accidental spills.
Steps for Removing the Filter:
1. Ensure that the pitcher is empty of water.
2. Grip the filter firmly at its base (usually around the blue or gray plastic ring).
3. Gently twist the filter counterclockwise to loosen it from the pitcher. If it’s stuck, use a screwdriver to gently pry it loose.
4. Pull the filter straight up and out of the pitcher.
5. Discard the used filter responsibly and replace it with a new one.
Please note that these steps may vary slightly depending on the specific Pur pitcher model you have. Refer to the user manual for your specific model for more detailed instructions.
Disconnecting the Filter Cap
Once you have successfully disassembled the filter, it is time to disconnect the filter cap. The filter cap is the component that connects the filter to the pitcher’s lid. It is usually made of plastic and has a small hole in the center. The hole allows water to flow from the filter into the pitcher.
To disconnect the filter cap, you will need to use a pair of pliers or a wrench. Wrap the pliers or wrench around the filter cap and turn it counterclockwise. The cap should come off easily.
Once the filter cap is disconnected, you can remove the filter from the pitcher. Be sure to dispose of the filter properly. Refer to your local recycling guidelines for specific instructions. Here is a table summarizing these steps:
| Step | Instructions |
|---|---|
| 1 | Use pliers or a wrench to wrap around the filter cap. |
| 2 | Turn the filter cap counterclockwise. |
| 3 | Remove the filter from the pitcher. |
Grasping the Filter
Locating the filter in most PUR pitchers is simple. It is typically situated within the central compartment of the pitcher, held in place by a small locking mechanism or a simple friction fit. Grasping the filter securely is essential to avoid spills or damage during the removal process.
Identifying the Release Mechanism
PUR pitchers employ various release mechanisms to secure the filter. Some models feature a lever or button that must be pressed or flipped to release the filter. Others utilize a simple twist-and-pull technique. Identifying the correct release mechanism for your specific pitcher is crucial for successful filter removal.
Unlocking the Filter
Once the release mechanism is identified, follow these steps to unlock the filter:
- For lever or button mechanisms, press or flip the designated button or lever to unlock the filter.
- For twist-and-pull mechanisms, gently twist the filter counterclockwise to break the friction fit and pull it straight up.
- In some pitchers, the filter may be secured with a locking ring. Locate the locking ring and turn it counterclockwise to loosen it, then gently lift the filter out.
Removing the Filter
With the filter unlocked, carefully lift it straight up and out of the pitcher. Avoid tilting the pitcher or shaking it, as this could cause water to spill or damage the filter.
Removing the Filter Unit
The filter unit is the heart of your PUR water pitcher, and it’s responsible for removing impurities and contaminants from your tap water. Over time, the filter will become less effective as it traps more and more contaminants, so it’s important to replace it regularly. Here’s how to do it:
1. Unplug the Water Pitcher
Before you start, unplug the water pitcher from the outlet. This will prevent you from getting shocked when you remove the filter.
2. Remove the Lid
Next, remove the lid from the water pitcher. This will give you access to the filter unit.
3. Locate the Filter Release Button
There should be a filter release button located on the side of the water pitcher. Press this button and the filter will pop out slightly.
4. Grip the Filter Unit
Grip the filter unit firmly and pull it straight up and out of the water pitcher.
5. Inspect the Filter Unit
Once you have removed the filter unit, take a close look at it. The filter should be white or off-white in color. If it is brown or black, it means that it is time to replace it. The table below shows the different colors of the filter and what they mean.
| Filter Color | Meaning |
|---|---|
| White or Off-White | The filter is clean and working properly. |
| Brown or Black | The filter is dirty and needs to be replaced. |
Cleaning the Pitcher Base
6. Dismantle the Base
To ensure a thorough cleaning, it’s crucial to disassemble the pitcher base into its individual components. Most PUR pitchers feature three main parts: the blue-colored filter housing, the water storage tank, and the spout assembly. Start by removing the blue filter housing by gently twisting it counterclockwise. Next, detach the spout assembly by pulling it straight up and away from the storage tank. Finally, carefully lift the storage tank straight up to completely separate it from the base.
7. Clean Individual Parts
Each component of the pitcher base requires specific cleaning methods. For the blue filter housing, rinse it thoroughly with warm water, paying special attention to the small holes on the bottom. Use a soft-bristled brush to gently dislodge any accumulated debris, but avoid using harsh detergents or abrasives. Clean the water storage tank by filling it with warm, soapy water and using a sponge or soft cloth to scrub the interior. Rinse it thoroughly with clean water to remove any soap residue. For the spout assembly, run warm water through it for several seconds to flush out any remaining impurities. If necessary, use a soft brush to remove any buildup around the spout opening.
8. Reassemble the Base
Once all the components are clean, reassemble the pitcher base by reversing the disassembly steps. Carefully fit the storage tank back onto the base, followed by the spout assembly. Twist the blue filter housing back into place, ensuring it is securely tightened to prevent leakage. Finally, fill the pitcher with cold water and pour it out through the spout several times to flush out any residual cleaning solution.
Inspecting the Filter for Damage
Before removing the PUR water filter from the pitcher, it’s crucial to inspect it for any signs of damage. This step ensures that you’re not using a compromised filter that could potentially contaminate your water. Here’s how to conduct a thorough inspection:
- Check the Exterior: Examine the filter’s surface for any cracks, dents, or deep scratches. These imperfections can weaken the filter’s structure and make it susceptible to leaks or breakage.
- Inspect the Ends: Pay particular attention to the ends of the filter, where it connects to the pitcher. Look for any signs of warping, fraying, or damage to the O-rings or gaskets that create a seal.
- Hold the Filter Horizontally: While holding the filter horizontally, shake it gently. Listen for any rattling sounds that indicate loose or broken internal components. A rattling filter can compromise its filtration efficiency and should be replaced immediately.
- Examine the Media: If the filter has been used for an extended period, inspect the filter media (usually activated carbon) for any discoloration or clumping. Discolored media may indicate the presence of impurities or bacteria, while clumping can reduce the filter’s flow rate.
- Check for Leaks: Turn the pitcher upside down and examine the filter’s connection point. If there are any leaks or water seepage, it’s an indication that the filter is damaged and needs to be replaced.
- Test the Water Flow: Fill the pitcher with cold water and allow the filter to fully saturate. If the water flow is unusually slow or restricted, it could indicate a clogged filter or a damaged membrane.
- Refer to the Manufacturer’s Instructions: Always consult the manufacturer’s instructions for specific guidelines on how to inspect and replace the PUR water filter.
| Signs of Damage | Action |
|---|---|
| Cracks, dents, or scratches | Replace filter immediately |
| Warped or damaged O-rings | Replace filter |
| Rattling sounds when shaken | Replace filter |
| Discolored or clumped media | Replace filter |
| Leaks or water seepage | Replace filter |
| Slow or restricted water flow | Inspect filter; replace if necessary |
How To Remove Pur Water Filter From Pitcher
PUR water pitchers are a convenient way to filter your tap water and improve its taste. The filter needs to be replaced every two months to ensure that it is working properly. Here are the steps on how to remove the PUR water filter from the pitcher:
1. Empty the Pitcher
Before you start, empty the pitcher of any remaining water.
2. Unscrew the Lid
Unscrew the lid of the pitcher by turning it counterclockwise.
3. Remove the Filter Lid
The filter lid is located in the center of the pitcher. Grip the lid and pull it straight up to remove it.
4. Remove the Old Filter
The old filter is located inside the filter lid. Grip the filter and pull it straight up to remove it.
5. Wash the Filter Lid
Wash the filter lid with warm, soapy water. Rinse it thoroughly and let it air dry.
6. Insert the New Filter
(If Needed) If you are replacing the filter, insert the new filter into the filter lid. Make sure that the filter is properly seated in the lid.
7. Replace the Filter Lid
Replace the filter lid by inserting it into the pitcher and pushing it down until it clicks into place.
8. Fill the Pitcher with Water
Fill the pitcher with cold water. The water will run through the filter and fill the pitcher with filtered water. Discard the first two pitchers of filtered water to remove any loose carbon particles.
9. Enjoy Your Filtered Water
Your PUR water pitcher is now ready to use. Enjoy your filtered water!
Inserting a New Filter (If Needed)
If you are replacing the filter, insert the new filter into the filter lid. Make sure that the filter is properly seated in the lid. The filter should be replaced every two months to ensure that it is working properly.
| Filter Type | Replacement Frequency |
|---|---|
| PUR Classic Filter | Every 2 months |
| PUR Ultimate Filter | Every 6 months |
| PUR Advanced Filter | Every 12 months |
Confirm the Direction of the Filter Cap
Examine the filter cap carefully. There should be an indicator mark or arrow indicating the correct direction in which it should be inserted.
Align the Filter Cap with the Housing
Position the filter cap directly over the filter housing, ensuring that the indicator mark aligns with the corresponding mark on the housing.
Insert the Filter Cap
Slowly and firmly insert the filter cap into the housing, twisting it clockwise until it is securely tightened.
Reattaching the Filter Cap
Locate the Filter Cap
The filter cap is usually located at the bottom of the pitcher.
Unlock the Filter Cap
Some pitchers have a lock mechanism that prevents accidental removal of the filter. Press or slide the lock to release it.
Remove the Filter Cap
Grasp the filter cap and gently twist it counterclockwise to loosen and remove it.
Clean the Filter Housing
Remove any residual water or debris from the filter housing using a damp cloth.
Insert the New Filter
Place the new filter into the housing, aligning the tabs or notches with the corresponding slots or tabs in the housing.
Tighten the Filter Cap
Replace the filter cap and tighten it by twisting it clockwise until it is snug.
Close the Lock (Optional)
If your pitcher has a lock mechanism, slide or press it back into place to secure the filter cap.
Rinse the Pitcher
Fill the pitcher with cold tap water and let it filter through several times to remove any residual taste or odor.
Rehydrating the Filter
Once you’ve chosen your filter and installed it in your pitcher, it’s important to rehydrate it before using it. This process helps to activate the filter’s media and ensures that your water is getting the best possible filtration.
To rehydrate your filter, simply follow these steps:
- Remove the filter from the pitcher.
- Run cold water over the filter for about 30 seconds.
- Fill the pitcher with cold water and let it stand for about 5 minutes.
- Pour out the water and refill the pitcher.
- Your filter is now rehydrated and ready to use.
You should rehydrate your filter every time you replace it. This will help to ensure that your water is always getting the best possible filtration.
| Filter Type | Rehydration Time |
|---|---|
| PUR Basic Filter | 30 seconds |
| PUR Advanced Filter | 5 minutes |
| PUR Ultimate Filter | 10 minutes |
How to Remove PUR Water Filter from Pitcher
PUR water filters are a great way to improve the taste and quality of your drinking water. They are easy to install and can be removed for cleaning or replacement in just a few simple steps.
-
Grasp the filter housing and turn it counterclockwise to loosen it.
-
Pull the filter housing straight up to remove it from the pitcher.
-
Remove the old filter from the housing and discard it.
-
Insert a new filter into the housing and press down to secure it.
-
Align the filter housing with the pitcher and turn it clockwise to tighten it.
People Also Ask
How often should I replace my PUR water filter?
PUR recommends replacing the water filter every two months, or more often if you notice a decrease in water flow or a change in taste.
Can I wash my PUR water filter housing in the dishwasher?
No
The PUR water filter housing is not dishwasher safe. It should be washed by hand with warm, soapy water.
How do I reset my PUR water filter indicator?
To reset the PUR water filter indicator, remove the filter housing and hold the reset button for 5 seconds. The indicator light will turn green, indicating that the filter has been reset.
