Prepare your device and the PopSocket. Ensure your device’s surface is clean and free of any debris or oils. Select a desired placement for your PopSocket, taking into account its functionality and aesthetics. If necessary, remove the protective film from the adhesive base of the PopSocket.
Apply pressure to the PopSocket. Firmly press down on the PopSocket’s adhesive base for 15-30 seconds. Apply pressure evenly across the entire surface to ensure a secure bond. Hold the PopSocket in place for several minutes, allowing the adhesive to fully adhere to your device’s surface.
Enjoy the versatility of your PopSocket. Your PopSocket is now securely attached to your device, providing enhanced grip, stability, and convenience. Utilize its multiple functions, including acting as a stand for hands-free media viewing or as a cord organizer to keep cables tidy. Customize your PopSocket with swappable tops to match your style or mood, and don’t hesitate to remove it when desired without leaving any residue behind.
Applying the Adhesive Base
Preparation: Before applying the PopSocket, ensure that the surface of your phone or case is clean and dry. Remove any dirt or debris with a microfiber cloth or rubbing alcohol.
Positioning: For optimal placement, hold the PopSocket up to your device and identify the most comfortable and accessible location. This may vary depending on your grip and intended use.
Applying the Base:
| Step | Instructions |
|---|---|
| 1 | Peel off the protective film from the adhesive base of the PopSocket. |
| 2 | Align the PopSocket with the desired position on your device. |
| 3 | Apply firm, even pressure for 30 seconds to ensure proper adhesion. |
Additional Tips:
- For best results, let the adhesive cure for 24 hours before using the PopSocket.
- If the adhesive loses its stickiness over time, clean it with rubbing alcohol and reapply the PopSocket.
- If you have a textured surface, it may be necessary to use an adapter for the PopSocket to adhere properly.
Aligning the PopSocket
**Step 1: Clean the Phone Surface**
Use an alcohol wipe or a soft, lint-free cloth to clean the back of your phone where you want to place the PopSocket. This will remove any dirt or oils that could prevent the adhesive from sticking properly.
**Step 2: Remove the Protective Film from the PopSocket**
Carefully peel off the protective film covering the adhesive surface of the PopSocket. Be careful not to touch the adhesive with your fingers, as this could leave behind oils that could weaken the bond.
**Step 3: Align the PopSocket on Your Phone**
Position the PopSocket on the back of your phone where you want it to be. Make sure it is centered and aligned with the bottom edge of your phone, as this will provide the most support when you’re using it as a stand.
**Step 4: Press Firmly to Adhere**
Once you have the PopSocket aligned, press down firmly on it for about 30 seconds to ensure that the adhesive bonds securely to your phone’s surface.
**Step 5: Wait Before Using**
It is important to wait at least 1 hour before using the PopSocket to give the adhesive time to fully cure. This will help prevent it from falling off or becoming loose.
Troubleshooting if the PopSocket Falls Off:
If the PopSocket falls off, it may not have been properly aligned or adhered to your phone. In this case, follow these steps:
- Clean your phone’s surface again with an alcohol wipe or a soft, lint-free cloth.
- Remove the protective film from a new PopSocket.
- Align the PopSocket carefully on your phone as described above.
- Press down firmly for at least 30 seconds to adhere.
- Wait at least 1 hour before using to allow the adhesive to fully cure.
Pressing Firmly for Adhesion
Once your PopSocket is properly aligned, pressing down firmly for approximately 15-20 seconds is crucial. This step ensures that the adhesive adheres effectively to the surface of your device. Avoid wiggling or moving the PopSocket during this time to prevent any air bubbles or imperfections from forming.
To enhance the adhesion further, it is recommended to avoid using any heavy accessories or exposing the PopSocket to extreme temperatures for the first 24 hours after application. This allows the adhesive to fully set and cure, resulting in a stronger and more durable bond.
If you experience any difficulties with adhesion, here’s a troubleshooting table for your reference:
| Issue | Solution |
|---|---|
| PopSocket is not adhering properly | Wipe down the surface of your device with a non-abrasive cloth to remove any dirt or debris that may interfere with adhesion. |
| PopSocket is sliding off | Press down on the PopSocket firmly for an extended period. Consider applying heat from a hair dryer or heat gun for improved adhesion. |
| Adhesive is peeling or breaking | Remove the PopSocket and reapply it to a different spot on your device. Ensure the surface is clean and free of any obstructions. |
Checking the Stability
Once you’ve attached your PopSocket, give it a good tug or push to verify its stability. Here are some specific factors to consider:
Position of Attachment:
The placement of the PopSocket on your phone’s back is crucial. Choose a spot that allows you to comfortably use the device without obstructing vital buttons or ports.
Adhesive Strength:
Examine the adhesive surface of the PopSocket. Ensure that the adhesive is firmly attached to your phone’s case or back and has no air bubbles or wrinkles.
Base Support:
The PopSocket’s base should rest flat against your phone’s surface. If it wobbles or shifts, it may indicate inadequate adhesion or a poorly designed base. Check for any damage or manufacturing defects in the PopSocket’s base.
Additional Stability Tips:
Use a Cleaning Kit:
Before installing the PopSocket, clean your device’s surface with an alcohol wipe or cleaning kit provided by the manufacturer. This removes any oils or dirt that may interfere with adhesion.
Wait Before Use:
Once the PopSocket is attached, allow the adhesive to set for the recommended time before using it. This gives the adhesive time to bond properly with your device’s surface.
Use a PopSocket Mount:
For added stability, consider using a PopSocket mount in your car, on your desk, or wherever you need to securely hold your phone. These mounts provide additional support, preventing your phone from falling or sliding.
Removing the Adhesive Tape
Once you’ve determined the ideal placement for your PopSocket, it’s time to remove the adhesive tape backing. Here are the steps to do so:
- Locate the protective tab: On the back of the PopSocket, you’ll find a small, clear protective tab covering the adhesive tape. Gently peel back this tab without touching the sticky surface.
- Position the base: Holding the PopSocket by the base, carefully align it with the desired spot on your device. Ensure that it’s centered and straight.
- Press firmly: Once the base is positioned, press down firmly on the adhesive surface for 15-30 seconds. Apply even pressure to ensure a secure bond.
- Remove the protective liner: After pressing, carefully remove the protective liner that’s covering the remaining adhesive area. Be cautious not to touch the exposed sticky surface.
- Press the top: With the protective liner removed, press down on the top of the PopSocket to secure it in place. Gently press around the edges to ensure a firm attachment.
Note: If you need to reposition the PopSocket, remove it slowly by peeling it off from the device. The adhesive tape may leave some residue behind. Use a cotton swab dipped in rubbing alcohol or a similar solvent to gently remove the residue without damaging your device.
Cleaning the Surface
Before applying the PopSocket, it is crucial to thoroughly clean the surface where it will be attached. Here’s a detailed guide to ensure a secure and long-lasting bond:
1. Gather Required Materials
* Isopropyl alcohol (70% or higher) or rubbing alcohol
* Clean microfiber cloth or cotton balls
* Optional: Gloves (to prevent smudges on the surface)
2. Prepare the Cleaning Solution
Dilute isopropyl alcohol in a small container or bowl. For optimal cleaning, use a mixture of 70% alcohol to 30% water.
3. Wipe Down the Surface
Dampen a clean microfiber cloth or cotton ball with the cleaning solution and gently wipe down the surface where the PopSocket will be placed. Ensure you remove any dirt, dust, or oils.
4. Let the Surface Dry
Allow the surface to air-dry completely before applying the PopSocket. This step is crucial for ensuring a strong, adhesive bond.
5. Optional: Test the Adhesion
To test the adhesion, gently press a piece of masking tape or painter’s tape to the surface. If the tape sticks firmly, the surface is ready for the PopSocket.
6. Tips for Cleaning Different Surfaces
| Surface Type | Additional Cleaning Considerations |
|---|---|
| Glass | – Use a glass cleaner specifically designed for electronics. – Be careful not to scratch the surface with sharp objects. |
| Metal | – Use a mild soap and water solution and dry thoroughly. – Avoid using abrasive cleaners. |
| Plastic | – Use an alcohol-based cleaner or a mild soap and water solution. – Avoid using harsh chemicals as they may damage the surface. |
| Leather | – Use a leather cleaner specifically designed for the type of leather. – Be cautious not to soak the leather excessively. |
| Silicone | – Clean with a mild soap and water solution or an alcohol-based wipe. – Avoid using harsh cleansers or solvents. |
Centering the PopSocket
To ensure the PopSocket is centered and securely attached, follow these steps:
- Measure the back of your phone or case and mark the center point with a light pencil mark or a piece of tape.
- Remove the adhesive backing from the PopSocket’s base.
- Place the PopSocket on the back of your device, aligning the center point of the PopSocket with the mark you made in step 1.
- Press down firmly on the PopSocket for at least 15 seconds to ensure a strong bond.
- Rotate the PopSocket clockwise or counterclockwise to check if it’s centered and secure.
- Avoid using the PopSocket for the first 24 hours to allow the adhesive to fully cure.
- If you need to reposition the PopSocket, gently pry it off the device using a credit card or a plastic tool. Clean the surface of the phone and the PopSocket with rubbing alcohol before reattaching it.
Applying Pressure Evenly
Once the adhesive has been properly applied, it’s essential to apply even pressure across the entire surface of the PopSocket to ensure a secure and long-lasting bond. Here are some detailed steps to guide you through this process:
1. Position the PopSocket Correctly
Align the PopSocket in the desired position on the back of your device. Make sure it’s centered and level to achieve a balanced look and functionality.
2. Apply Initial Pressure
Use your thumb or finger to apply gentle but firm pressure on the center of the PopSocket. This initial pressure activates the adhesive and starts the bonding process.
3. Spread the Pressure Evenly
Gradually expand the pressure outward from the center towards the edges of the PopSocket. Use a circular motion to distribute the pressure evenly.
4. Apply Gradual Force
Gradually increase the force you’re applying as you move towards the edges. This ensures that the adhesive adheres properly to the entire surface.
5. Continue Pressure for 1 Minute
Maintain the pressure for at least 1 minute. This allows the adhesive to cure and form a strong bond with the device.
6. Avoid Excessive Force
Avoid applying excessive force or pressing too hard, as this may damage the PopSocket or your device.
7. Check for Secure Bonding
After applying pressure, gently try to pull the PopSocket off. If there’s no movement or resistance, it indicates a secure bond.
8. Allow 24 Hours to Set
For optimal adhesion, allow the adhesive to cure for 24 hours before using your PopSocket to avoid any accidental detachments.
Waiting for the Adhesive to Cure
Once you’ve applied the PopSocket to your phone or case, it’s crucial to give the adhesive time to cure and reach its maximum strength. Here’s a detailed guide to ensure a strong and durable bond:
1. Allow 15-20 Minutes of Curing Time:
After applying the PopSocket, press down firmly for the first 30 seconds to ensure full contact. Then, lay your device or case flat and leave it undisturbed for at least 15-20 minutes.
2. No Heavy Usage:
Avoid using the PopSocket for any heavy activities, such as propping up your phone or attaching accessories, during the curing period. This will prevent premature stress on the adhesive and weaken the bond.
3. Gentle Pressure and Movement:
If necessary, you can gently press on the edges of the PopSocket to help it adhere better. However, avoid excessive or forceful pressure that could damage the device or PopSocket.
4. Avoid Temperature Extremes:
Keep your device and PopSocket at room temperature while curing. Extreme heat or cold can affect the adhesive’s properties and weaken the bond.
5. Humid Conditions:
Avoid applying the PopSocket in humid environments. Humidity can interfere with the drying process and reduce the adhesive’s effectiveness.
6. Wait Before Attaching Accessories:
If you plan to use accessories such as a phone grip or pop case, wait until the adhesive has fully cured before attaching them. This will ensure a stronger hold.
7. Clean Surfaces Before Applying:
Prior to applying the PopSocket, ensure that your device or case is clean and free of any dirt, dust, or oils. This will promote proper adhesion.
8. Use a Case-Friendly PopSocket:
If you’re using a phone case, check if the PopSocket you’re applying is case-friendly. Some PopSockets may not adhere properly to certain types of cases.
9. Repositioning the PopSocket:
If you need to reposition the PopSocket within the first 15-20 minutes of application, follow these steps:
| Step | Instructions |
|---|---|
| 1 | Carefully peel off the PopSocket from your device or case. |
| 2 | Wipe away any adhesive residue on both the PopSocket and your device. |
| 3 | Wait for the adhesive to dry for a few minutes before reapplying the PopSocket to a new location. |
How To Put On Popsocket
Enjoy the Versatile Accessory
Popsockets are small, collapsible grips that attach to the back of your phone or tablet. They provide a secure grip, can be used as a stand, and can even be customized with your photos or designs.
Here are instructions on how to put on a Popsocket:
1. Clean the back of your phone or tablet with rubbing alcohol. This will help the Popsocket adhere better.
2. Remove the liner from the Popsocket base.
3. Align the Popsocket base with the center of the back of your phone or tablet.
4. Press down on the Popsocket base for 30 seconds.
5. Pull up on the Popsocket top to expand it.
6. Enjoy your Popsocket!
Removing a Popsocket
To remove a Popsocket, simply pull it straight up from the base. The adhesive is designed to be repositionable, so you can remove and reattach your Popsocket as needed.
Troubleshooting
If you have any trouble putting on or removing your Popsocket, here are a few troubleshooting tips:
* Make sure the back of your phone or tablet is clean and dry.
* Use a credit card or other object to apply pressure to the Popsocket base when you’re attaching it.
* Don’t be afraid to remove and reattach your Popsocket if it’s not perfect the first time.
* If you’re still having trouble, you can contact Popsocket customer service for assistance.
Tips for Using Your Popsocket
Here are a few tips for getting the most out of your Popsocket:
* Use it as a grip to keep your phone from slipping out of your hand.
* Use it as a stand to prop your phone up on a desk or table.
* Wrap your headphones around the Popsocket to keep them tangle-free.
* Customize your Popsocket with your own photos or designs.
Popsockets are a versatile and fun way to add personality to your phone or tablet. With a little care and attention, you can enjoy your Popsocket for years to come.
How To Put On A Popsocket
Popsockets are a fun and functional way to add some personality to your phone or tablet. They also make it easier to hold your device and can even be used as a stand. Putting on a Popsocket is easy. Here’s how to do it:
- Clean the back of your device with a rubbing alcohol wipe.
- Peel off the backing of the Popsocket.
- Align the Popsocket with the center of the back of your device.
- Press down on the Popsocket for 15 seconds.
That’s it! Your Popsocket is now attached to your device. You can now use it to hold your device, prop it up, or even wrap your headphones around it.
People Also Ask About How To Put On A Popsocket
Can I put a Popsocket on a case?
Yes, you can put a Popsocket on a case. However, it is important to make sure that the case is compatible with Popsockets. Some cases are too thick or have a textured surface that can prevent the Popsocket from sticking properly.
How do I remove a Popsocket?
To remove a Popsocket, simply pull it straight off the back of your device. If the Popsocket is difficult to remove, you can use a credit card or other thin object to pry it off.
Can I reuse a Popsocket?
Yes, you can reuse a Popsocket. However, the adhesive on the back of the Popsocket will become less sticky over time. If the Popsocket starts to lose its stickiness, you can clean it with a rubbing alcohol wipe and reattach it to your device.
