If you’re a sneakerhead, you know that Jordans are a must-have. But if you’re new to the Jordan game, you might not know how to tie them properly. Don’t worry, we’re here to help. In this article, we’ll show you how to tie Jordan shoes in a few simple steps. Once you’ve mastered the basics, you can experiment with different lacing techniques to create your own unique style.
The most common way to tie Jordan shoes is the “straight lace” method. This is a simple and straightforward way to lace your shoes, and it’s perfect for everyday wear. To tie your shoes using the straight lace method, simply follow these steps:
- Start by threading the laces through the bottom two eyelets on one side of the shoe.
- Cross the laces over each other and thread them through the next two eyelets.
- Continue crossing the laces over each other and threading them through the eyelets until you reach the top of the shoe.
- Tie the laces together in a knot or bow.
Once you’ve mastered the straight lace method, you can try out some of these other lacing techniques to create your own unique style:
- The criss-cross lace: This lacing technique is a bit more complicated than the straight lace method, but it creates a more stylish look. To tie your shoes using the criss-cross lace method, simply follow these steps:
- Start by threading the laces through the bottom two eyelets on one side of the shoe.
- Cross the laces over each other and thread them through the next two eyelets.
- Instead of continuing to cross the laces over each other, thread the left lace through the right eyelet and the right lace through the left eyelet.
- Continue threading the laces through the eyelets in this criss-cross pattern until you reach the top of the shoe.
- Tie the laces together in a knot or bow.
- The heel lock lace: This lacing technique is perfect for preventing heel slippage. To tie your shoes using the heel lock lace method, simply follow these steps:
- Start by threading the laces through the bottom two eyelets on one side of the shoe.
- Cross the laces over each other and thread them through the next two eyelets.
- Instead of continuing to cross the laces over each other, thread both laces through the same eyelet on the opposite side of the shoe.
- Tighten the laces and continue threading them through the eyelets until you reach the top of the shoe.
- Tie the laces together in a knot or bow.
The Iconic Laces
The Air Jordan sneakers are known for their iconic laces, which are typically flat and wide. They come in a variety of colors and materials, and can be used to create a variety of different lacing patterns.
How to Lace Jordan Shoes
There are many different ways to lace Jordan shoes, but the most common method is the criss-cross lacing pattern. To do this, start by threading the laces through the bottom two lace holes on one side of the shoe. Then, cross the laces over each other and thread them through the next two lace holes on the other side of the shoe. Continue this pattern until you reach the top of the shoe.
You can also lace Jordan shoes using the bunny ear lacing pattern. To do this, start by threading the laces through the bottom two lace holes on one side of the shoe. Then, make a loop with the laces and thread it through the next lace hole on the same side of the shoe. Repeat this process on the other side of the shoe. Continue this pattern until you reach the top of the shoe.
Once you have laced your Jordan shoes, you can tighten the laces by pulling on them evenly. You can also adjust the tension of the laces by loosening or tightening the knot at the top of the shoe.
Lace Care
To keep your Jordan shoe laces looking their best, it is important to clean them regularly. You can do this by hand-washing them with soap and water, or by machine-washing them on a gentle cycle. Be sure to air-dry the laces completely before putting them back in your shoes.
Here is a table summarizing the different lacing patterns for Jordan shoes:
| Lacing Pattern | Description |
|---|---|
| Criss-Cross | The most common lacing pattern, which involves crossing the laces over each other in a criss-cross pattern. |
| Bunny Ear | A more decorative lacing pattern, which involves making loops with the laces and threading them through the lace holes. |
Perfecting the Five-Hole Loop
Once you’ve mastered the basic loop, it’s time to perfect the five-hole loop, the signature lacing technique for Jordans. To achieve this coveted style, follow these steps:
- Repeat Step 1 of the basic loop. Lace the left lace through the second hole from the top on the left side of the shoe.
- Cross the laces. Bring the right lace over the left lace and through the third hole from the top on the left side.
- Create a horizontal loop. Bring the right lace back across the shoe and through the third hole from the top on the right side, creating a horizontal loop.
- Repeat on the other side. Repeat Steps 2 and 3 on the right side of the shoe.
- Secure the loops. Pull both loops tight to secure the laces.
The five-hole loop adds a touch of flair to your Jordans while keeping them snugly fastened. Here’s a table summary of the steps involved:
| Step | Lace Path |
| 1 | Left lace through second hole from top on left side |
| 2 | Right lace over left lace, through third hole from top on left side |
| 3 | Right lace back across shoe, through third hole from top on right side |
| 4 | Repeat Steps 2-3 on right side |
| 5 | Pull both loops tight to secure |
Mastering the Six-Hole Cross
The Six-Hole Cross technique is designed for Jordan shoes with six lace holes on the front and back of each shoe. This method creates a secure and stylish lace-up.
To start, insert the laces through the bottom two holes on the inside of each shoe, leaving about 6 inches of lace on one end and 8-10 inches on the other. Cross the laces over each other on the outside of the shoe, and thread the longer lace through the third hole up from the bottom on the same side.
Bring the lace across the shoe and thread it through the third hole up from the bottom on the opposite side. Continue alternating laces, threading them through the third hole up from the bottom on each side until you reach the top. Lace the remaining holes in the same manner.
The Trailblazing Three-Lace System
The advent of the Jordan 1 in 1985 marked a paradigm shift in athletic footwear. This iconic silhouette introduced the groundbreaking three-lace system, a revolutionary design that revolutionized the way players and sneaker enthusiasts lace their kicks. Unlike traditional two-lace systems, the three-lace configuration provides unparalleled customization and versatility, allowing for a snug and secure fit tailored to individual preferences.
The three-lace system comprises three distinct pairs of laces that are interwoven through the shoe’s eyelets in a triangular pattern. This intricate arrangement creates a network of interlocking loops that can be tightened or loosened independently, ensuring a precise and comfortable fit. For example, one can tighten the lower laces for a snug heel grip while leaving the upper laces looser for increased ankle mobility.
Moreover, the three-lace system allows for creative expression through diverse lacing patterns. Here are some popular lacing techniques to enhance the aesthetic appeal of your Jordans:
|
Lacing Pattern |
Description |
|---|---|
|
Standard |
Interweave laces through opposing eyelets, creating a series of parallel lines. |
|
Crisscross |
Alternate lace crossings, forming a crisscrossing pattern that resembles a spiderweb. |
|
Lace Lock |
Create a loop with one lace and secure it under the other, preventing the laces from loosening. |
By mastering the intricate art of three-lace lacing, you can transform your Jordans into a statement piece that reflects your unique style and preference.
Taming the Four-Lace Diamond
The four-lace diamond is a classic lacing technique that provides both style and function. Here’s how to master it:
1. Start with a Diamond: Begin by forming a diamond shape with the laces on the bottom loops of the top two lace holes.
2. Criss-Cross and Tuck: Bring the left lace over the right lace and tuck it under the next lace hole to the right. Repeat on the other side.
3. Diamond on Top: Flip the shoe over and create a small diamond shape with the laces on the bottom loops of the next two lace holes.
4. Over and Under: Bring the left lace over the right lace and then under the next lace hole to the right. Repeat on the other side.
5. Cross and Tie: Bring the left lace over the right lace and create a cross shape. Then, bring both laces up through the last lace hole and tie a bow as desired.
The Elusive Two-Lace Double Knot
The two-lace double knot is the most secure and stylish way to tie your Jordan shoes. It’s a bit more complicated than the standard knot, but it’s worth the extra effort. To tie a two-lace double knot, follow these steps:
1. Cross the laces
Cross the right lace over the left lace, then bring the left lace up through the loop from behind.
2. Tighten the knot
Pull on both laces to tighten the knot. Make sure it’s snug, but not too tight.
3. Create a loop
Take the right lace and make a loop, then pass the left lace through the loop from behind.
4. Tighten the knot again
Pull on both laces to tighten the knot. This will create a second knot that will help to keep the laces in place.
5. Trim the laces
Trim the excess laces to about 2 inches long. You can use a scissors or a lighter to melt the ends.
6. Tuck the laces in
Tuck the ends of the laces into the shoes to hide them. This will give your shoes a clean and finished look.
Here’s a more detailed look at step 6:
| Step | Description |
|---|---|
| 1 | Take the right lace and make a loop. |
| 2 | Pass the left lace through the loop from behind. |
| 3 | Pull on both laces to tighten the knot. |
| 4 | Trim the excess laces to about 2 inches long. |
| 5 | Tuck the ends of the laces into the shoes to hide them. |
Variations for Enhanced Style
Over-Under Lacing
This technique creates a distinctive crosshatch pattern on the upper of the shoe. Thread the lace through the bottom eyelet, cross it over the next eyelet, and then thread it through from the bottom. Repeat this pattern all the way up the shoe.
Ladder Lacing
This variation results in a more open and breathable lacing pattern. Start with the lace threaded through the lowest eyelet on one side, then cross it over to the top eyelet on the other side. Continue alternating between sides, threading the lace through the bottom eyelet on one side and the top eyelet on the other side, until you reach the end.
Bar Lace
With this method, the lace is run straight up and down through the eyelets, creating a simple and clean look. Thread the lace through the bottom eyelet, then through the next eyelet up on the same side. Repeat this pattern all the way up the shoe.
Chain Lace
This technique produces a more intricate and decorative lace pattern. Start with the lace threaded through the bottom eyelet, then cross it over to the next eyelet up. Thread it through from the bottom, then cross it over the eyelet above that and thread it through again. Repeat this pattern until you reach the end.
Lace Locks
Lace locks can be added to any lacing technique to create a more secure and customized fit. To create a lace lock, simply cross the two laces over each other and then thread one lace through the loop formed by the other. Pull the laces tight to create a secure hold.
Additional Lacing Variations
In addition to the techniques listed above, there are numerous other lacing variations that can be used to customize the look and feel of your Jordan shoes. Experiment with different patterns and colors to find the one that fits you best.
Lace Swap Options
If you want to take your Jordan shoe customization to the next level, consider swapping out the laces for a different color or material. This can dramatically change the look of your shoes and give them a more unique and personal touch.
Lace Protection for Extended Life
Prolonging the lifespan of your Jordan laces is crucial for maintaining the pristine appearance of your kicks. Follow these expert tips to keep your laces in optimal condition:
1. **Choose Durable Laces:** Opt for laces made from high-quality materials like nylon or cotton, which offer superior strength and durability.
2. **Lace Locker:** Invest in a lace locker, a small device that secures the laces at the top of the shoe, preventing them from fraying or coming undone.
3. **Double Lace Knot:** When tying your shoes, double-knot the laces to create a more secure hold, reducing the chances of them slipping or loosening.
4. **Lace Guards:** Lace guards, available in various materials like leather or plastic, provide protective coverage to the laces, shielding them from abrasion and dirt.
5. **Use Beeswax:** Apply a thin layer of beeswax to the laces, creating a protective barrier against moisture and wear.
6. **Avoid Over-Tightening:** When lacing your Jordans, avoid pulling the laces too tightly, as it can cause undue stress on the laces and lead to premature breakage.
7. **Periodically Inspect the Laces:** Regularly inspect the laces for any signs of fraying or damage. Replace frayed laces promptly to prevent further deterioration.
8. **Lace Rotation:** To evenly distribute wear and tear, consider alternating between different pairs of laces on a regular basis. This prevents one pair from becoming overly worn while extending the lifespan of all your laces.
Here’s a table summarizing the lace protection tips:
| Lace Protection Technique |
|---|
| Choose Durable Laces |
| Use Lace Locker |
| Double Lace Knot |
| Lace Guards |
| Use Beeswax |
| Avoid Over-Tightening |
| Periodically Inspect the Laces |
| Lace Rotation |
The Double Knot
The double knot is a classic and secure lacing method. Follow these steps to lace your Jordan shoes using the double knot:
- Start by crossing the laces over each other.
- Take the right lace over the left lace and through the loop you created.
- Pull the right lace tight.
- Repeat steps 2 and 3 with the left lace.
- Pull both laces tight.
- Cross the laces over each other again.
- Take the right lace over the left lace and through the loop you created.
- Pull the right lace tight.
- Repeat steps 7 and 8 with the left lace.
- Pull both laces tight.
The Bunny Ear Knot
The bunny ear knot is a fun and decorative lacing method. Follow these steps to lace your Jordan shoes using the bunny ear knot:
- Start by crossing the laces over each other.
- Take the right lace over the left lace and through the loop you created.
- Pull the right lace tight.
- Take the left lace over the right lace and through the loop you created.
- Pull the left lace tight.
- Create a loop with the right lace.
- Create a loop with the left lace.
- Cross the loops over each other.
- Pull the loops tight.
- Repeat steps 6-9 until you reach the desired length.
The Heel Lock Knot
The heel lock knot is a secure and comfortable lacing method that prevents the laces from coming loose. Follow these steps to lace your Jordan shoes using the heel lock knot:
- Start by crossing the laces over each other.
- Take the right lace over the left lace and through the loop you created.
- Pull the right lace tight.
- Take the left lace over the right lace and through the loop you created.
- Pull the left lace tight.
- Take the right lace and loop it around the heel tab.
- Pull the right lace tight.
- Take the left lace and loop it around the heel tab.
- Pull the left lace tight.
- Tie the laces together using a double knot.
Lace Length Guide
| Shoe Size | Lace Length |
|---|---|
| US 5-7 | 45 inches |
| US 8-10 | 54 inches |
| US 11-13 | 63 inches |
| US 14-16 | 72 inches |
10. Creative Lacing Patterns
If you want to take your Jordan shoe lacing game to the next level, try out one of these creative patterns. These patterns are sure to turn heads and make your shoes stand out from the crowd.
Here are a few creative lacing patterns to try:
- Criss-cross lacing: This pattern creates a criss-cross pattern on the top of your shoe. To do this, start by lacing the first two pairs of eyelets in a criss-cross pattern. Then, lace the next two pairs of eyelets in the opposite direction. Repeat this pattern until you reach the top of the shoe.
- Over-under lacing: This pattern creates an over-under pattern on the top of your shoe. To do this, start by lacing the first two pairs of eyelets in an over-under pattern. Then, lace the next two pairs of eyelets in the opposite direction. Repeat this pattern until you reach the top of the shoe.
- Lace Lock lacing: This pattern creates a lace lock on the top of your shoe. To do this, start by lacing the first two pairs of eyelets in a criss-cross pattern. Then, lace the next two pairs of eyelets in the opposite direction. Repeat this pattern until you reach the top of the shoe. Then, thread the lace through the last two pairs of eyelets and tie it off.
- Weave lacing: This pattern creates a weave pattern on the top of your shoe. To do this, start by lacing the first two pairs of eyelets in an over-under pattern. Then, lace the next two pairs of eyelets in the opposite direction. Repeat this pattern until you reach the top of the shoe. Then, thread the lace through the last two pairs of eyelets and tie it off.
These are just a few of the many creative lacing patterns that you can try. Experiment with different patterns until you find one that you like. You can also mix and match different patterns to create your own unique style.
How To Tie Jordan Shoes
Jordan shoes are a popular type of sneaker that is worn by people of all ages. They are known for their stylish design and comfortable fit. If you are new to wearing Jordan shoes, you may be wondering how to tie them. Here are step-by-step instructions on how to tie Jordan shoes:
- Start by holding the two laces in your hands, with the left lace in your left hand and the right lace in your right hand.
- Cross the left lace over the right lace, making an “X” shape.
- Bring the right lace up and through the loop that you created in step 2.
- Pull the left lace down and through the loop that you created in step 3.
- Tighten the knot by pulling on both laces at the same time.
- You can now repeat steps 2-5 to create a double knot, which is more secure than a single knot.
People Also Ask About How To Tie Jordan Shoes
How do you tie Jordan 1s?
Jordans 1s are tied the same way as other Jordan shoes. Follow the steps outlined in the section above on “How To Tie Jordan Shoes.”
How do you tie Jordan 4s?
Jordan 4s are also tied the same way as other Jordan shoes. Follow the steps outlined in the section above on “How To Tie Jordan Shoes.”
How do you tie Jordan 11s?
Jordan 11s have a slightly different lacing system than other Jordan shoes. To tie Jordan 11s, follow these steps:
- Start by holding the two laces in your hands, with the left lace in your left hand and the right lace in your right hand.
- Cross the left lace over the right lace, making an “X” shape.
- Bring the left lace up and through the loop that you created in step 2.
- Pull the right lace down and through the loop that you created in step 3.
- Tie a knot by pulling on both laces at the same time.
- Now, take the left lace and bring it across the right lace, making an “X” shape.
- Bring the left lace up and through the loop that you created in step 6.
- Pull the right lace down and through the loop that you created in step 7.
- Tie a knot by pulling on both laces at the same time.
- Repeat steps 6-9 until you reach the desired tightness.
