Maintaining the cleanliness and efficiency of your Frigidaire refrigerator’s water filtration system is crucial for ensuring the quality and taste of your drinking water. Regularly replacing the water filter is an essential part of this maintenance routine, and it’s a straightforward task that can be easily accomplished by following a few simple steps. Understanding how to take out a Frigidaire water filter empowers you to maintain the health of your family and the longevity of your refrigerator.
Before embarking on the filter replacement process, it’s essential to gather the necessary tools. You’ll need a replacement water filter cartridge compatible with your specific Frigidaire refrigerator model. Additionally, a pair of needle-nose pliers or a specialized water filter removal tool could prove handy, especially if the old filter is particularly difficult to remove. Once you have the necessary supplies, you can proceed with the filter removal process.
The location of the water filter in your Frigidaire refrigerator varies depending on the model, but it’s typically situated either inside the refrigerator compartment or behind the grille on the bottom front of the refrigerator. Once you’ve located the filter, grasp it firmly and twist it counterclockwise to release it from its housing. If the filter is stuck, you can use needle-nose pliers or a water filter removal tool to gently pry it loose. Once the old filter is removed, insert the new cartridge into the housing and twist it clockwise until it’s securely in place. Reset the filter indicator light, if your refrigerator has one, and you’re good to go. Enjoy the peace of mind that comes with knowing your family has access to clean, refreshing water.
Removing the Front Grille
The front grille of your Frigidaire refrigerator provides access to the water filter. Removing the grille is a simple process that can be completed in a few minutes. Here are the steps:
- Locate the front grille at the bottom of the refrigerator door. It is usually held in place by two screws.
- Use a screwdriver to remove the screws. Hold the grille firmly with one hand and use the other hand to pull it straight out.
- Once the grille is removed, you will see the water filter housing. The housing is usually located on the right side of the refrigerator, behind the grille.
| Tools you will need: |
|---|
| Phillips screwdriver |
Tips:
- Be careful not to damage the grille when removing it.
- If you have difficulty removing the grille, try using a putty knife to gently pry it loose.
- Once the grille is removed, be sure to clean the area around the water filter housing.
Disconnecting the Water Line
1. Shut-off the Water Supply
Locate the water supply valve behind the refrigerator. Turn the valve clockwise using a wrench or pliers to shut off the water supply. Verify that the water is turned off by opening the dispenser. The water should stop flowing within a few seconds.
2. Disconnect the Water Line
Disconnect the water line from the refrigerator by pressing the release clip on the connector. Grip the connector firmly with one hand and pull the water line straight out with the other hand. Use a towel to catch any dripping water.
3. Remove the Water Filter
Disconnect the water line from the refrigerator by pressing the release clip on the connector. Grip the connector firmly with one hand and pull the water line straight out with the other hand. Use a towel to catch any dripping water.
Locate the water filter head, which is usually found on the top or side of the refrigerator. Turn the filter head counterclockwise to loosen it. Once it is loose, pull it straight out of the refrigerator.
Insert the new water filter into the filter head. Push it straight in until it clicks into place. Turn the filter head clockwise to tighten it.
Reconnect the water line to the refrigerator. Press the release clip on the connector and insert the water line into the connector. Release the clip to secure the water line.
Turn on the water supply valve behind the refrigerator. Check for leaks by opening the dispenser. If there are no leaks, your refrigerator is ready to use.
| Step | Description |
|---|---|
| 1 | Locate the water supply valve and turn it clockwise to shut off the water supply. |
| 2 | Disconnect the water line from the refrigerator by pressing the release clip on the connector. |
| 3 | Remove the water filter by turning the filter head counterclockwise and pulling it straight out of the refrigerator. |
How to Take Out a Frigidaire Water Filter
Frigidaire water filters help to remove impurities from your water, providing you with cleaner, healthier water to drink and use for cooking. Over time, however, these filters can become clogged with sediment and other contaminants, which can reduce their effectiveness and lead to problems with your refrigerator’s water dispenser. If you notice that your water is tasting or smelling bad, or if your water dispenser is not working properly, it may be time to replace your Frigidaire water filter.
Replacing a Frigidaire water filter is a relatively simple process that can be completed in just a few minutes. Here are the steps on how to do it:
- Locate the water filter housing. The water filter housing is typically located on the back or side of your refrigerator. It is usually a small, white or blue plastic housing with a removable cover.
- Remove the cover from the water filter housing. To remove the cover, simply push down on the tab on the top of the housing and lift it up.
- Pull out the old water filter. Once the cover is removed, you will be able to see the old water filter. Grip the filter by its handle and pull it straight out of the housing.
- Insert the new water filter. To insert the new water filter, simply push it into the housing until it clicks into place.
- Replace the cover on the water filter housing. Once the new filter is in place, replace the cover on the housing and push down on it until it snaps into place.
That’s it! You have now successfully replaced your Frigidaire water filter.
People Also Ask
How often should I replace my Frigidaire water filter?
Frigidaire recommends that you replace your water filter every 6 months, or more often if you have hard water or notice that your water is tasting or smelling bad.
What happens if I don’t replace my Frigidaire water filter?
If you don’t replace your Frigidaire water filter, it can become clogged with sediment and other contaminants, which can reduce its effectiveness and lead to problems with your refrigerator’s water dispenser. In addition, old water filters can harbor bacteria, which can make you sick.
Where can I buy a replacement Frigidaire water filter?
You can buy a replacement Frigidaire water filter at most hardware stores, home improvement stores, and online retailers.
