1. Easy Step-by-Step Guide to Changing Oil on a 2022 Kia Seltos

Kia Seltos oil change
2022 Kia Seltos oil change

Maintaining your Kia 2022 Seltos is essential for ensuring its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes help to keep your engine running smoothly, reduce wear and tear, and improve fuel efficiency. This guide will provide you with step-by-step instructions on how to change the oil on your Kia 2022 Seltos.

Before you start, it is important to gather the necessary tools and materials. You will need a new oil filter, a new crush washer, a socket wrench, a funnel, and new oil. It is also important to consult your vehicle’s owner’s manual for specific instructions and safety precautions.

The first step is to locate the oil pan and drain plug. The oil pan is usually located at the bottom of the engine, and the drain plug is a small bolt that is located at the bottom of the oil pan. Once you have located the oil pan and drain plug, place a drain pan under the drain plug to catch the used oil. Using a socket wrench, carefully loosen the drain plug and allow the oil to drain into the drain pan.

Materials Required for Changing Oil

Essential Tools and Equipment:

To successfully change the oil in your 2022 Kia Seltos, you’ll need a range of essential tools and equipment. These include:

A suitable socket wrench with the appropriate size socket to remove the oil drain plug
An oil filter wrench to loosen and remove the oil filter
A funnel to guide the fresh oil into the engine
A clean drain pan to collect the used oil
Nitrile gloves to protect your hands from hot oil and chemicals

Recommended Fluids and Filters:

In addition to the tools, you’ll also need to purchase specific fluids and filters for your Seltos. These include:

Full synthetic 0W-20 motor oil
Kia Genuine or equivalent oil filter
New crush washer for the oil drain plug

Oil Capacity:

Engine	Oil Capacity
1.6L GDI	4 quarts (3.8 liters)
2.0L GDI	6 quarts (5.7 liters)

Safety Precautions and Preparation

Before you begin, it’s crucial to take necessary safety precautions and prepare your vehicle and workspace:

Safety Precautions

– Park your vehicle on a level surface and engage the parking brake.
– Allow the engine to cool down completely to avoid burns.
– Wear appropriate safety gloves and eye protection.
– If possible, elevate the vehicle using jack stands for better access.

Preparation

– Gather all necessary tools and materials, including:

New engine oil (check owner’s manual for recommended grade and capacity)
New oil filter
Oil drain pan
Wrench or socket set
Funnel

– Locate the oil drain plug and oil filter. Refer to your owner’s manual for specific locations.

– Place the oil drain pan under the drain plug to collect the used oil.

– Position the funnel into the oil fill hole on top of the engine.

– Check the oil level using the dipstick and add more oil as needed until it reaches the “Full” mark.

– Tighten the oil drain plug and oil filter snugly but not excessively.

– Reset the oil life indicator, if necessary (refer to owner’s manual).

– Dispose of the used oil and filter responsibly.

Locating the Oil Drain Plug and Oil Filter

To begin, locate the oil drain plug at the bottom of the oil pan. This is typically a 17mm bolt that is located towards the rear of the oil pan. Once you have located the oil drain plug, place an oil drain pan under the oil pan to catch the draining oil.

Step 1: Removing the Oil Drain Plug

Use a 17mm wrench or socket to carefully loosen the oil drain plug. Be careful not to overtighten the plug as this can damage the oil pan. Allow the oil to drain completely into the oil drain pan.

Step 2: Replacing the Oil Filter

While the oil is draining, locate the oil filter. The oil filter on the 2022 Kia Seltos is typically located behind the engine near the exhaust manifold. Remove the oil filter cap by turning it counterclockwise. Be careful not to spill any oil when removing the cap.

Remove the old oil filter and inspect it for any damage or debris. Apply a thin layer of new oil to the gasket of the new oil filter and hand-tighten it onto the engine. Use an oil filter wrench to tighten the filter by an additional ¾ of a turn. Be careful not to overtighten the oil filter as this can damage the filter or the engine.

Step 3: Tightening the Oil Drain Plug

Once the oil filter is replaced, replace the oil drain plug. Use a 17mm wrench or socket to tighten the plug to a torque of 25 ft-lbs. Be careful not to overtighten the plug as this can damage the oil pan.

Step	Action
1	Remove the oil drain plug.
2	Replace the oil filter.
3	Tighten the oil drain plug to a torque of 25 ft-lbs.

Draining the Old Oil

Before you start draining the old oil, it’s important to gather the following tools: a new oil filter, a new oil drain plug washer, a 17mm wrench, a 14mm wrench, an oil drain pan, and some gloves. Once you have all of your tools, you can follow these steps to drain the old oil:

1. Safety First

Put on your gloves and park your car on a level surface, and make sure that the parking brake is engaged.

2. Locate the Oil Drain Plug

The oil drain plug is located on the bottom of the oil pan. It is a 17mm bolt.

3. Place the Oil Drain Pan

Place the oil drain pan under the oil drain plug. Make sure that the pan is large enough to catch all of the old oil.

4. Drain the Oil

Use the 17mm wrench to loosen the oil drain plug. Be careful not to drop the bolt into the oil pan. Once the bolt is loose, allow the oil to drain into the pan. This may take several minutes.

Tip:
To speed up the draining process, you can use a funnel to pour the oil into the pan.

Replacing the Oil Filter

Once you’ve drained the old oil, it’s time to replace the oil filter. The oil filter is located on the side of the engine, and it’s usually held in place by a bolt. To remove the oil filter, simply loosen the bolt using a wrench, and then pull the filter off. Be careful not to spill any oil when you do this.

Once the oil filter is removed, you’ll need to replace it with a new one. Make sure to use the correct oil filter for your Kia Seltos. You can find the correct oil filter by looking in your vehicle’s owner’s manual.

To install the new oil filter, simply screw it onto the mounting bracket until it’s snug. Be sure not to overtighten the filter, as this can damage the filter or the threads on the mounting bracket.

Once the oil filter is installed, you can tighten the drain plug and add new oil to the engine. Be sure to check the oil level on the dipstick to make sure that you’ve added the correct amount of oil.

Tightening the Oil Drain Plug

Once the oil has drained completely, it’s time to tighten the oil drain plug. Here’s a step-by-step guide:

1. Clean the Oil Drain Plug and Washer

Before tightening the plug, it’s essential to clean off any dirt or debris that may have accumulated on the plug and washer. Use a clean rag or paper towel to wipe them down.

2. Apply a New Washer

Replace the old washer with a new one. The washer helps create a tight seal and prevent leaks. Ensure the washer is seated correctly on the plug.

3. Hand-Tighten the Oil Drain Plug

Use your hand to tighten the oil drain plug as much as possible. This will prevent cross-threading and ensure a snug fit.

4. Use a Wrench to Tighten Further

Once the plug is hand-tight, use a wrench to tighten it further. However, avoid overtightening it, as this can damage the oil pan or the threads on the plug.

5. Double-Check for Tightness

After tightening the plug with a wrench, use your hand to double-check that it feels snug. There should be a slight amount of resistance when rotating the plug by hand.

Tightening Torque Specifications

To ensure proper tightening, refer to the Kia Seltos owner’s manual for the recommended torque specifications for the oil drain plug. It varies depending on the year and model of your vehicle.

Year	Recommended Torque (ft-lbs)
2021-2022	22-29

Adding New Oil

Once the oil filter has been replaced, it’s time to add new oil to your Kia Seltos. Refer to your vehicle’s owner’s manual for the recommended oil type and quantity specifically for your year and model.

Materials Needed:

Item
New oil filter
New engine oil
Funnel

Here are the steps to add new oil:

Remove the oil cap located on the top of the engine.
Insert a funnel into the oil filler hole.
Pour the recommended amount of new oil into the funnel.
Replace the oil cap once the oil is added.
Check the oil level using the dipstick to ensure it’s at the proper level.
Start the engine and let it run for a few minutes to circulate the new oil.
Recheck the oil level after the engine has been running and adjust if necessary.

Checking the Oil Level

Maintaining your engine’s oil level is crucial for its optimal performance and longevity. Here’s how to check the oil level in your 2022 Kia Seltos:

Park the vehicle on a level surface and allow the engine to cool for several minutes.
Locate the engine oil dipstick, usually identified by a yellow or orange handle.
Pull out the dipstick and wipe it clean with a lint-free cloth.
Reinsert the dipstick into the engine and withdraw it again.
Observe the oil level on the dipstick. There should be oil between the “Min” and “Max” marks.
If the oil level is below the “Min” mark, add more oil to the engine.
If the oil level is above the “Max” mark, remove some oil from the engine.
Use a funnel to add or remove oil through the oil filler cap, which is usually located on top of the engine.

Recommended Oil Capacity

Engine	Oil Capacity (Quarts)
2.0L I-4	5.3
1.6L Turbo I-4	5.8

Resetting the Oil Life Monitor

Once you’ve changed the oil, you’ll need to reset the oil life monitor so that it can accurately track the next oil change interval. Here’s how to do it:

Turn the ignition switch to the “ON” position, but do not start the engine.
Press and hold the trip reset button on the instrument panel.
While holding the trip reset button, turn the ignition switch to the “START” position and then release the button.
The oil life monitor will begin to flash.
Press the trip reset button again to reset the oil life monitor to 100%.
Turn the ignition switch to the “OFF” position.

The oil life monitor is now reset and will accurately track the next oil change interval.

Note: If you do not reset the oil life monitor, it will continue to count down the remaining oil life until it reaches 0%. At this point, the oil life monitor will display a “CHANGE OIL” message and the CHECK ENGINE light may illuminate.

Extended Detail on Resetting the Oil Life Monitor

For vehicles equipped with a touch screen display, follow these additional steps to reset the oil life monitor:

Turn off the engine.
Touch the “Settings” icon on the touch screen.
Touch the “Vehicle” tab.
Touch the “Maintenance” option.
Touch the “Oil Life Reset” option.
Touch the “Reset” button.

The oil life monitor will now be reset.

Year	Engine	Oil Capacity (quarts)
2023	1.6L I4	4.0
2023	2.5L I4	4.5
2023	1.6L Turbo I4	4.5

Materials You’ll Need

– 10W-30 motor oil (4 quarts)
– New oil filter (Kia Genuine Part #26300-35503)
– 17mm socket wrench
– Oil filter wrench
– Funnel
– Drain pan
– Gloves
– Rags

Disposal of Used Oil and Filter

Once you’ve removed the used oil and filter, it’s important to dispose of them properly. Used oil can be harmful to the environment if not disposed of properly. It can contaminate water supplies, soil, and wildlife if not disposed of properly.

There are several ways to dispose of used oil and filters. You can take them to a local auto parts store or recycling center. Many auto parts stores offer free oil recycling services. You can also check with your local waste management company to see if they offer oil recycling services.

When disposing of used oil, make sure to store it in a sealed container. This will prevent spills and leaks. You should also label the container clearly with the words “Used Oil”.

Used oil filters can also be recycled. You can take them to a local auto parts store or recycling center. Many auto parts stores offer free oil filter recycling services. You can also check with your local waste management company to see if they offer oil filter recycling services.

Item	Disposal Method
Used oil	Take to an auto parts store or recycling center
Used oil filter	Take to an auto parts store or recycling center

How to Change Oil on a Kia 2022 Seltos

Regular oil changes are essential for maintaining the health of your Kia Seltos. Here’s a step-by-step guide on how to perform an oil change on a 2022 Kia Seltos:

Gather necessary materials: New oil filter, 5 quarts of 0W-20 synthetic oil, oil drain plug washer, oil filter wrench, wrench or socket set, funnel, and rag.
Safety first: Park the Seltos on a level surface and engage the parking brake. Allow the engine to cool down.
Locate oil drain plug: Slide under the front of the vehicle and locate the oil drain plug at the bottom of the oil pan.
Place oil pan: Position an oil pan under the drain plug to catch the old oil.
Remove drain plug: Using a wrench, carefully loosen the oil drain plug, allowing the oil to drain into the pan.
Replace oil filter: Locate the oil filter near the engine. Use an oil filter wrench to loosen it. Apply a thin layer of new oil to the gasket and screw on the new oil filter by hand until it’s snug.
Replace drain plug: Install the oil drain plug back into the oil pan. Tighten it securely using a wrench.
Add new oil: Using a funnel, pour 5 quarts of new 0W-20 synthetic oil into the engine.
Check oil level: Use the dipstick to check the oil level. Add more oil as needed until it reaches the “Full” mark.
Reset oil life indicator: Start the engine and let it run for a few minutes. Turn off the engine and wait for a few minutes for the oil to settle. Reset the oil life indicator according to your vehicle’s instructions.