How To Reset Tire Pressure Light Honda Accord
The Tire Pressure Monitoring System (TPMS) light on your Honda Accord is a valuable safety feature that alerts you to low tire pressure. Low tire pressure can reduce your car’s handling and braking performance, and can even lead to a flat tire. If the TPMS light comes on, it’s important to check your tire pressure as soon as possible, as indicated on the vehicle’s door jamb. If the tire pressure is low, inflate the tires to the correct pressure and the light should turn off automatically after a few minutes of driving. However, if the light stays on after you’ve inflated the tires, you may need to reset the TPMS system.
Featured Image
[Image of a Honda Accord with the TPMS light on]
Resetting the TPMS System
To reset the TPMS system on your Honda Accord, you will need to use the TPMS reset button located under the dashboard. The location of the button may vary depending on the year of your Accord, so consult your owner’s manual for specific instructions. Once you have found the button, press and hold it for about 5 seconds. The TPMS light will flash several times, and then turn off. This indicates that the system has been reset.
Driving After Resetting the TPMS System
After you have reset the TPMS system, you will need to drive for a short period of time (about 10 minutes) for the system to relearn the tire pressures. During this time, the TPMS light may flash intermittently. Once the system has relearned the tire pressures, the light should turn off and stay off. Please refer to your Honda Accord’s owner’s manual for more information about the TPMS system and its operation. Safety should always be a priority when driving.
Selecting the Tire Pressure Reset Option
To access the tire pressure reset option, follow these steps:
- Turn on the ignition, but do not start the engine.
- Navigate to the settings menu using the steering wheel controls.
- Scroll down to the “Vehicle” or “Maintenance” section.
- Select the “Tire Pressure” or “TPMS” option.
- Choose the “Reset” or “Initialize” option.
- Depending on the year and trim level of your Accord, the exact wording and location of the reset option may vary slightly.
- Refer to your owner’s manual or consult with a Honda dealership for specific instructions for your particular model.
- Confirm the reset by selecting “Yes” or “OK.”
- The tire pressure light should now turn off.
Additional Notes:
- It may take a few minutes for the tire pressure monitoring system (TPMS) to recalibrate and the light to turn off.
- If the tire pressure light does not turn off after resetting, it may indicate a persistent tire pressure issue. In this case, check the tire pressure of all four tires using a tire pressure gauge.
- Regularly checking and maintaining proper tire pressure is essential for optimal vehicle performance, handling, and safety.
Maintaining Optimal Tire Pressure
Maintaining optimal tire pressure is crucial for ensuring safe and efficient driving. Follow these steps to reset the tire pressure light in your Honda Accord:
1. Check and Adjust Tire Pressure
Use a tire pressure gauge to check the pressure in each tire. Inflate the tires to the recommended pressure specified in your vehicle’s owner’s manual.
2. Turn on the Ignition
Turn on the ignition but do not start the engine.
3. Enter the TPMS Reset Mode
Press and hold the TPMS reset button located near the steering wheel. The button is usually marked with an image of a car or a tire.
4. Release the Button and Press It Again
Release the reset button once the tire pressure light starts flashing. Press and hold it again for a few more seconds.
5. Observe the Tire Pressure Light
The tire pressure light will continue to flash. The flashing indicates that the system is resetting.
6. Drive for a Short Distance
Once the tire pressure light stops flashing, drive for a short distance to allow the TPMS system to relearn the new tire pressures.
7. Turn Off the Ignition
Park your Honda Accord and turn off the ignition.
8. Restart the Engine
Restart the engine and check if the tire pressure light is still illuminated. If the light is off, the reset is complete.
9. Note: For Models with Indirect TPMS (2016 and Newer)
For models with indirect TPMS (2016 and newer), the reset procedure is slightly different.
After performing steps 1-3, follow these additional steps:
10. Drive Approximately 20 Minutes
Drive for at least 20 minutes at speeds of 35 mph or higher to allow the TPMS system to relearn the tire pressures.
| Some Points To Remember |
|---|
| – Ensure that the tire pressure light is illuminated before performing the reset. |
| – If the tire pressure light persists after resetting, consult your Honda dealer for assistance. |
| – Regularly check and adjust tire pressure to maintain optimal performance and safety. |
How To Reset Tire Pressure Light Honda Accord
The tire pressure light on your Honda Accord is designed to alert you to a potential problem with your tires. If the light is on, it means that one or more of your tires is underinflated. This can be dangerous, as it can lead to reduced traction, increased wear on your tires, and even a blowout.
To reset the tire pressure light on your Honda Accord, you will need to:
- Turn the ignition to the “ON” position.
- Navigate to the “Settings” menu on the dashboard.
- Select the “Vehicle” option.
- Scroll down and select the “Tire Pressure” option.
- Press the “Reset” button.
People also ask about How To Reset Tire Pressure Light Honda Accord
How to check tire pressure?
To check tire pressure, you will need a tire pressure gauge. Insert the gauge into the valve stem on the tire and press down. The gauge will display the tire pressure in pounds per square inch (psi). The recommended tire pressure for your Honda Accord can be found on the sticker inside the driver’s door jamb.
How to add air to a tire?
To add air to a tire, you will need an air compressor. Connect the air compressor to the valve stem on the tire and turn it on. The air compressor will add air to the tire until it reaches the desired pressure. Be sure to check the tire pressure with a tire pressure gauge to ensure that it is at the correct level.
How to fix a flat tire?
To fix a flat tire, you will need a spare tire, a jack, and a lug wrench. First, use the jack to raise the flat tire off the ground. Then, use the lug wrench to loosen the lug nuts on the flat tire. Remove the lug nuts and the flat tire, and then mount the spare tire on the wheelbase. Tighten the lug nuts on the spare tire, and then lower the jack to the ground. Finally, check the tire pressure in the spare tire and adjust it to the recommended level.
