Unveiling the intricacies of timekeeping, Armitron invites you on an enlightening journey to master the art of setting time with effortless precision. Whether you’re a seasoned watch enthusiast or a novice seeking guidance, this comprehensive guide will empower you with the knowledge to navigate the complexities of timekeeping effortlessly. As we embark on this adventure together, let us delve into the intricacies of Armitron’s timekeeping mechanisms, empowering you to conquer the challenges of time and harness its boundless potential.
At the heart of Armitron’s timekeeping prowess lies a symphony of precision engineering and intuitive design. With a meticulous attention to detail, each timepiece is meticulously crafted to deliver unwavering accuracy. From the intricate workings of quartz movements to the timeless elegance of classic analog dials, Armitron’s watches are a testament to the enduring pursuit of horological excellence. Whether you prefer the sleek sophistication of digital displays or the timeless allure of traditional hands, Armitron offers a diverse range of timepieces to suit every taste and preference.
Navigating the intricacies of time setting is an essential skill in the realm of horology. With Armitron’s user-friendly designs, setting time becomes an effortless endeavor. Whether you’re adjusting for daylight saving time, resetting after a battery replacement, or simply ensuring the accuracy of your daily companion, Armitron’s timepieces empower you with intuitive controls and clear instructions. By following the simple steps outlined in this guide, you will be able to set the time on your Armitron watch with precision and confidence, ensuring that every moment is cherished and celebrated with the utmost accuracy.
Understanding the Functions
Armitron watches offer a wide range of functions, including timekeeping, date display, alarms, and stopwatches. To effectively set the time and utilize these functions, it’s essential to understand the purpose and operation of each button on the watch.
Typically, Armitron watches feature two or more buttons located on the right-hand side of the watch face. These buttons are designated as follows:
**Mode Button:** This button is often labeled “Mode” or “ADJ” and is used to switch between different watch modes, such as timekeeping, date setting, alarm setting, and stopwatch mode.
**Set Button:** The “Set” button, also known as the “ADJ” or “SET” button, is used to adjust the time and other settings within each mode. When pressed in conjunction with the Mode button, it allows for setting the hour, minute, second, month, day, year, and alarm time.
**Start/Stop Button:** Some Armitron watches include a dedicated “Start/Stop” button, which is used to initiate and stop stopwatch functionality.
**Reset Button:** If your watch has a “Reset” button, it is typically used to reset stopwatch or countdown timer functions.
Understanding the functions of these buttons is crucial for effectively setting the time and accessing the various features of your Armitron watch.
Locating the Time Adjustment Buttons
Armitron watches usually have two or three small buttons on the side of the watch case. These buttons are used to adjust the time, date, and other settings.
To identify the time adjustment buttons, look for the buttons with the following symbols:
- Time mode button: This button is usually labeled with the letter “M” or has a clock icon.
- Forward adjustment button: This button is usually labeled with the letter “A” or has an “up” arrow.
- Reverse adjustment button: This button is usually labeled with the letter “B” or has a “down” arrow.
Time Mode Button
The Time Mode button is generally the one at the center or the top. It is primarily used to switch between different modes of the watch, including Timekeeping Mode, Alarm Mode, Stopwatch Mode, and other modes.
Notable Variations
Here are some variations of the Time Mode button:
- M (Mode) Button: The button is explicitly labeled with the letter "M." This is a common designation for Time Mode buttons.
- Center Button: In some models, the center button may serve as the Time Mode button. It may not have a specific label.
- Upper Button: The upper button, located at the top of the side buttons, can sometimes be the Time Mode button.
Identifying the Time Mode button is crucial as it allows you to enter the Timekeeping Mode, where you can adjust the time and date settings.
Time Adjustment Mode
To enter the Time Adjustment mode, press the “Mode” button until the time display starts flashing. You can then proceed with the following steps to adjust the time:
1. Adjust the Hours
Use the “+” and “-” buttons to adjust the hours. Hold down the button to increase or decrease the hours quickly.
2. Adjust the Minutes
After setting the hours, press the “Mode” button to move to the minutes adjustment. Use the “+” and “-” buttons to adjust the minutes.
3. Adjust the Seconds
To adjust the seconds, press the “Mode” button again to move to seconds adjustment. Unlike many other watches, Armitron watches allow you to adjust the seconds manually. Use the “+” and “-” buttons to adjust the seconds. This feature is particularly useful for synchronizing the watch with precise time sources, such as atomic clocks or GPS signals.
4. Toggle Between 12-Hour and 24-Hour Time Formats
If your watch supports both 12-hour and 24-hour time formats, you can toggle between them by pressing the “Mode” button once more. The watch will display “12H” or “24H” in the time display to indicate the current format.
5. Exit Time Adjustment Mode
To exit the Time Adjustment mode and save the changes, press and hold the “Mode” button until the time display stops flashing.
Setting the Time on an Armitron Watch
Forwarding the Hour
To advance the hour on your Armitron watch, follow these steps:
- Press the “Mode” button once or twice until the time display starts flashing.
- Press the “Adjust” button repeatedly to set the correct hour.
- Press the “Mode” button to move to the minutes.
- Hold the “Adjust” button down for at least 4 seconds. The watch will start to advance the hour rapidly. Continue holding the button until you reach the desired hour.
- Release the “Adjust” button and press the “Mode” button to set the minutes.
- Press the “Mode” button again to save the changes and exit the setting mode.
| Button | Function |
|---|---|
| Mode | Changes the display mode (time, date, etc.) |
| Adjust | Adjusts the time and other settings |
Adjusting the Minute
Once the hour is set, you’ll need to adjust the minutes. Here’s how:
1. Pull the crown out to the second position.
This will allow you to rotate the crown and adjust the minutes.
2. Rotate the crown to set the minutes.
Turn the crown clockwise to move the minute hand forward and counterclockwise to move it backward.
3. Press the crown back in to the first position.
This will save the new time and return the crown to its normal position.
4. Check the time.
Make sure the time is set correctly before proceeding to the next step.
5. Fine-tuning the seconds (if necessary)
If the time is not exactly right, you can fine-tune it by following these steps:
- Pull the crown out to the second position.
- Gently rotate the crown forward or backward to move the second hand by one-second increments.
- Once the second hand is positioned correctly, press the crown back in to the first position.
6. Check the time again.
Verify that the time is now set accurately.
AM/PM Setting
The Armitron watch can be set to display time in either 12-hour or 24-hour format. To set the AM/PM setting:
- Press the “Mode” button until the time display starts flashing.
- Press the “Adjust” button to toggle between 12-hour and 24-hour format.
- Once the desired format is selected, press the “Mode” button to save the setting.
Note: If your Armitron watch does not have a designated "Mode" button, refer to the user manual for the specific steps on how to set the AM/PM setting.
Setting the Second
To set the second hand on your Armitron watch, follow these steps:
- Place the watch flat on a table or stable surface.
- Pull the crown out to the second position (one click).
- Use a toothpick or similar pointed object to gently press on the “SET SEC” button. This button is usually located on the side of the watch case.
- Hold the button down for a few seconds until the second hand starts moving.
- Once the second hand is moving, gently release the SET SEC button.
- The second hand will now move by itself. While it is moving, use the crown to adjust the time by rotating it clockwise or counterclockwise.
- Once the second hand is set to the desired time, push the crown back into the first position (against the watch case).
Additional Notes:
- If the watch has a hacking movement, the second hand will stop when you pull the crown out to the second position.
- If the watch does not have a hacking movement, the second hand will continue to run when you pull the crown out. In this case, you will need to estimate the time when setting the seconds.
- It is important to be careful when pressing the SET SEC button. If you press too hard, you may damage the button or the watch movement.
Finalizing the Time
Now that you’ve walked through the steps to set the time on your Armitron watch, you can finalize the setting. This involves saving the time you’ve set and ensuring it displays accurately.
To do this, you’ll need to press and hold the “Mode” button for a few seconds. This will cause the watch to beep and the time display to start flashing. Use the “Forward” and “Reverse” buttons to adjust the time as needed.
The Number 8
When setting the time on your Armitron watch, it’s important to pay special attention to the number 8. This is because the “Forward” and “Reverse” buttons advance and reverse the time in 8-second increments. Therefore, if you need to adjust the time by a small amount, you may need to press the button multiple times.
For example, if you need to advance the time by 2 seconds, you would press the “Forward” button once. To advance the time by 10 seconds, you would press the button twice. Similarly, if you need to reverse the time by 6 seconds, you would press the “Reverse” button three times.
This 8-second increment is important to keep in mind when setting the time on your Armitron watch. By understanding how it works, you can ensure that you set the time accurately and efficiently.
Considerations for Analog Models
Analog models require a bit more dexterity and attention than digital ones. Here are some specific considerations to keep in mind:
1. Identifying the Crown
Analog watches have a small knob or lever called a “crown” on the side of the watch case. This crown is used to set the time and date.
2. Pulling the Crown Out
In most cases, you need to pull the crown out slightly to change the time. Pulling it out too far may cause it to come loose.
3. Rotating the Crown
Once the crown is pulled out, you can rotate it to set the time. Typically, rotating clockwise moves the time forward, while rotating counterclockwise moves it back.
4. Setting the Hour Hand
Set the hour hand first. Align it with the correct hour marker on the watch face.
5. Setting the Minute Hand
Next, set the minute hand. Be careful not to move the hour hand accidentally while doing this.
6. Setting the Second Hand (Optional)
Some analog watches have a separate knob on the crown for setting the second hand. If yours does, you can now set it to 0 seconds for accurate timing.
7. Pushing the Crown Back In
Once the time is set, push the crown back into its original position. This will lock the settings in place.
8. Re-Closing the Crown
For water-resistant watches, ensure the crown is fully closed to maintain proper sealing.
9. Setting the Date (Optional)
If your watch has a date function, you can set the date by pulling the crown out once or twice more, depending on the watch model. Rotating the crown in the desired direction will adjust the date.
| Rotation Direction | Action |
|---|---|
| Clockwise | Advance the date |
| Counterclockwise | Decrement the date |
Setting Time on an Armitron Watch
To set the time on an Armitron watch, follow these steps:
- Pull the crown out to the second position.
- Use the crown to adjust the hour hand to the correct hour.
- Push the crown in to the first position.
- Use the crown to adjust the minute hand to the correct minute.
- Push the crown all the way in to the normal position.
Troubleshooting Common Issues
1. The time is not accurate.
The time may not be accurate if the battery is low. Replace the battery and try setting the time again.
2. The crown is stuck.
If the crown is stuck, try gently pulling it out. If it still does not come out, you may need to take the watch to a jeweler for repair.
3. The watch is not working.
If the watch is not working, check the battery. If the battery is dead, replace it and try restarting the watch. If the watch still does not work, you may need to take it to a jeweler for repair.
4. The watch is losing time.
If the watch is losing time, the battery may be low. Replace the battery and try setting the time again. If the watch still loses time, you may need to take it to a jeweler for repair.
5. The watch is gaining time.
If the watch is gaining time, the battery may be low. Replace the battery and try setting the time again. If the watch still gains time, you may need to take it to a jeweler for repair.
6. The watch is not waterproof.
Armitron watches are not waterproof. Avoid exposing the watch to water to prevent damage.
7. The watch is not shock resistant.
Armitron watches are not shock resistant. Avoid dropping or bumping the watch to prevent damage.
8. The watch is not magnetic resistant.
Armitron watches are not magnetic resistant. Avoid exposing the watch to magnets to prevent damage.
9. The watch is not scratch resistant.
Armitron watches are not scratch resistant. Avoid scratching the watch to prevent damage.
10. The watch is not dust resistant.
Armitron watches are not dust resistant. Avoid exposing the watch to dust to prevent damage.
Armitron How To Set Time
Armitron watches are known for their durability, affordability, and stylish designs. They are a popular choice for people who want a reliable watch that will last for years to come. If you have an Armitron watch, you may be wondering how to set the time. Here are the steps on how to set the time on an Armitron watch:
- Pull the crown out to the second position.
- Turn the crown clockwise to set the hour hand.
- Turn the crown counterclockwise to set the minute hand.
- Push the crown back in to the first position.
You can also use the following steps to set the date on your Armitron watch:
- Pull the crown out to the first position.
- Turn the crown clockwise to set the date.
- Push the crown back in to the first position.
People Also Ask About Armitron How To Set Time
How do I set the time on my Armitron watch with two crowns?
If your Armitron watch has two crowns, you will need to use the following steps to set the time:
- Pull the upper crown out to the second position.
- Turn the upper crown clockwise to set the hour hand.
- Turn the upper crown counterclockwise to set the minute hand.
- Push the upper crown back in to the first position.
- Pull the lower crown out to the first position.
- Turn the lower crown clockwise to set the date.
- Push the lower crown back in to the first position.
How do I set the alarm on my Armitron watch?
If your Armitron watch has an alarm, you will need to use the following steps to set the alarm:
- Pull the crown out to the second position.
- Turn the crown clockwise to set the alarm hour hand.
- Turn the crown counterclockwise to set the alarm minute hand.
- Push the crown back in to the first position.
