Setting up a Bestway pool can be a fun and rewarding experience, providing you and your family with hours of summer enjoyment. With just a few simple steps and some basic tools, you can have your pool up and running in no time. In this article, we’ll provide you with detailed instructions on how to set up your Bestway pool, ensuring a safe and successful installation.
Before you begin, it’s important to choose the right location for your pool. Make sure the area is level, free of debris, and has adequate drainage. Once you’ve selected the location, clear the area and remove any sharp objects that could puncture the pool liner. It’s also a good idea to have some sand or gravel on hand to help level the ground and provide a stable base for the pool.
Now, let’s get started with the actual setup. First, spread out the pool liner and smooth out any wrinkles. Next, insert the top rails into the sleeves around the top of the pool liner. Make sure the rails are securely in place and that the liner is taut. Now, it’s time to attach the legs to the top rails. Start by inserting the legs into the holes in the top rails, then secure them with the provided bolts. Once the legs are in place, flip the pool over and attach the bottom rails to the legs. Finally, fill the pool with water and enjoy the fun!
Preparing the Site
Before assembling your Bestway pool, it is crucial to prepare the site adequately to ensure safe and long-lasting use.
1. Select a Level Surface
Choose a level, dry, and well-drained area for your pool. Avoid slopes, depressions, or areas that accumulate water.
2. Clear the Area and Prepare the Base
Thoroughly clear the area of all debris, rocks, roots, and vegetation. For above-ground pools, create a solid and level base using compacted sand, gravel, or concrete patio stones. Ensure that the base is large enough to extend at least 12 inches beyond the pool edges.
Preparing a Sand Base (for above-ground pools):
| Material | Depth |
|---|---|
| Sand | 4 inches |
| Compacted Sand Base | 2 inches |
Preparing a Concrete Patio Stone Base (for above-ground pools):
| Material | Depth |
|---|---|
| Concrete Patio Stones | 3 inches |
| Compacted Stone Base | 2 inches |
3. Protect the Liner (Optional)
For added protection, you may lay down a pool liner pad beneath the pool. This padding helps prevent punctures and tears in the liner from ground debris.
Assembling the Pool
1. Choose a Suitable Location
Select a level, well-drained area that is at least 2 feet away from any structures, trees, or power lines. Ensure the ground is free of rocks, roots, or other sharp objects that could puncture the pool liner.
2. Prepare the Ground
Use a garden rake to level the ground and create a smooth, firm surface. Lay a ground cloth or tarp over the area to protect the pool liner from damage.
3. Inflate the Top and Bottom Rings
Materials:
- Air pump
- Top and bottom pool rings
Steps:
a. Connect the air pump to the inlet valve on the top ring.
b. Inflate the top ring until it is slightly firm, but not fully inflated (about 75% full).
c. Repeat steps a and b for the bottom ring.
d. Rolling out the Pool Liner:
- Carefully spread out the pool liner over the inflated rings, ensuring it is centered.
- Smooth out any wrinkles or creases in the liner.
e. Installing the Leg Connectors: - Place the leg connectors over the top ring, aligning them with the holes in the liner.
- Push down on each connector until it snaps into place.
- Repeat for all leg connectors.
f. Assembling the Legs: - Insert the legs into the holes on the leg connectors.
- Ensure the legs are fully extended and locked in place.
- Connect the leg supports between the legs for added stability.
g. Filling the Pool with Water: - Connect the garden hose to the inlet valve on the pool liner.
- Slowly fill the pool with water, starting from the center and working outwards.
- Stop filling when the water reaches the recommended level indicated on the inside of the pool.
h. Adding Chlorine: - Once the pool is filled, add chlorine according to the manufacturer’s instructions to maintain a proper water balance.
Setting Up the Filter and Pump
Proper installation of your pool’s filter and pump is crucial for efficient water circulation and sanitation. Follow these steps carefully to ensure optimal performance:
1. Position the Pump
Choose an elevated location near the pool to prevent water damage to the pump. Ensure it’s level and at least 2 feet from the edge of the pool.
2. Connect the Filter
Attach the filter to the pump, tightening the connections securely. Connect the pool’s lowest return fitting to the outlet valve on the filter.
3. Connect the Skimmer Box
Place the skimmer box in the designated hole on the pool wall. Connect the skimmer hose to the inlet port on the pump.
4. Prime the Pump
This step is essential to remove air from the pump and suction line:
- Close the pump’s lid tightly.
- Open the air release valve on the top of the filter.
- Turn on the pump and let it run until water starts flowing out of the air release valve.
- Close the air release valve and tighten it securely.
- Open the valves on the filter and the pool return lines.
| Hose Connection | Diameter |
|---|---|
| Pump to Filter | 1.5 inches |
| Filter to Pool | 1.5 inches |
| Skimmer to Pump | 1.25 inches |
Filling the Pool with Water
Filling your Bestway pool with water is a simple and straightforward process. Here’s a step-by-step guide to help you fill your pool efficiently.
1. Choose the Right Location
Select a level and stable area in your backyard that receives ample sunlight. Ensure the area is clear of debris and sharp objects.
2. Prepare the Ground
Lay down a ground cloth or tarp to protect the pool liner from punctures. You can also add a layer of sand to further cushion the pool.
3. Assemble the Pool
Follow the manufacturer’s instructions to assemble the pool. Ensure all the poles, legs, and support structures are securely in place.
4. Connect the Filter Pump
Attach the filter pump to the pool outlet and inlet. Prime the pump with water and turn it on to ensure proper circulation.
5. Fill the Pool Gradually
Use a garden hose or water spigot to fill the pool. Fill it gradually to avoid splashing or overloading the pump. Here’s a detailed breakdown of the filling process:
a. Check the Water Level: Monitor the water level regularly as you fill the pool. Avoid filling it to the top to allow for water expansion during hot weather.
b. Circulate the Water: Run the filter pump while filling the pool to distribute the chemicals evenly and prevent stagnation.
c. Skim Debris: Use a pool skimmer to collect debris from the pool’s surface as it fills.
Maintaining the Pool
Maintaining a Bestway pool is essential for keeping it clean, safe, and enjoyable throughout the summer. Here are some detailed instructions to help you keep your pool in top condition:
1. Clean the Pool Regularly
Use a pool vacuum or brush to remove dirt, debris, and algae from the pool’s surfaces. You should aim to clean the pool at least once a week, more often if it’s heavily used.
2. Test and Adjust Chemical Levels
Regularly test the pool’s pH, chlorine, and alkalinity levels and make adjustments as needed. Proper chemical balance is crucial for maintaining a healthy pool.
3. Backwash the Filter
The pool filter needs to be backwashed regularly to remove accumulated debris. Follow the manufacturer’s instructions for your specific filter.
4. Add Chemicals
Add pool chemicals such as chlorine or bromine to keep the water clean and free of bacteria. Follow the product instructions carefully.
5. Skim the Surface
Use a pool skimmer to remove floating debris from the pool’s surface. This helps prevent debris from sinking to the bottom and clogging the filter.
6. Brush the Walls and Floor
Use a pool brush to scrub the walls and floor of the pool to prevent algae growth and remove any stuck-on dirt.
7. Weekly Maintenance Checklist
| Task | Frequency |
|---|---|
| Test the water chemistry | Weekly |
| Backwash the filter | Weekly |
| Clean the pool (vacuum or brush) | Weekly |
| Skim the surface | Daily |
| Brush the walls and floor | Weekly |
| Add chemicals | As needed |
| Inspect the pool for leaks or damage | Weekly |
Extending the Pool’s Life
1. **Proper Storage**: When not in use, store the pool in a cool, dry place away from direct sunlight to prevent damage to the material.
2. **Regular Cleaning**: Clean the pool regularly to remove dirt, debris, and algae that can damage the liner and shorten its lifespan.
3. **Chemical Maintenance**: Maintain the pool’s chemical balance to prevent the growth of bacteria and protect the liner.
4. **Covering the Pool**: Use a pool cover when not in use to prevent dirt, debris, and sunlight from damaging the liner and water.
5. **Avoiding Overfilling**: Overfilling the pool can put excessive pressure on the liner, potentially causing leaks.
6. **Protecting the Liner**: Use a ground cloth or foam pad under the pool to prevent punctures and tears from sharp objects.
7. **Trim Pool Surroundings**: Keep grass and other vegetation trimmed around the pool to avoid debris and damage to the liner.
8. **Avoid Extreme Temperatures**: Protect the pool from extreme cold or heat, as these conditions can damage the liner and pool walls.
9. **Pool Maintenance Schedule**: Follow a regular maintenance schedule including cleaning, chemical balancing, and inspections to identify and address any potential issues early on.
| Task | Frequency |
|---|---|
| Cleaning | Weekly or as needed |
| Chemical Balancing | Weekly or bi-weekly |
| Inspection | Monthly or as needed |
Enjoying Your Bestway Pool
Prepare your backyard for summer fun with a Bestway pool! Setting it up is a breeze with these step-by-step instructions.
1. Choose a level and well-drained site for your pool.
2. Remove any rocks or debris from the area.
3. Spread out the ground cloth over the chosen area.
4. Assemble the pool according to the manufacturer’s instructions.
5. Inflate the pool using an air pump.
6. Fill the pool with water.
7. Treat the water with pool chemicals.
8. Connect a filter pump to the pool if desired.
9. Let the pool run for 24 hours before swimming.
10. Maintaining Your Bestway Pool
To keep your Bestway pool clean and safe, it’s important to perform regular maintenance. Here are some tips:
• Check the water chemistry weekly and adjust according to manufacturer’s instructions.
• Clean the pool filter cartridge every 2-3 weeks.
• Vacuum the pool regularly to remove dirt and debris.
• Brush the pool walls and floor to keep them smooth and free of algae.
• Skim the pool surface regularly to remove floating debris.
• Backwash the filter according to manufacturer’s instructions.
• Cover the pool when not in use to prevent dirt and debris from accumulating.
By following these tips, you can enjoy your Bestway pool for many years to come.
| Maintenance Task | Frequency |
|---|---|
| Check water chemistry | Weekly |
| Clean filter cartridge | Every 2-3 weeks |
| Vacuum the pool | As needed |
| Brush the pool walls and floor | Weekly |
| Skim the pool surface | Daily |
| Backwash the filter | As needed |
| Cover the pool | When not in use |
Bestway Pool Set Up Instructions: A Comprehensive Guide
Setting up a Bestway pool can be a daunting task, but with the right instructions, it can be a breeze. Follow these step-by-step instructions to ensure a safe and enjoyable pool experience.
1. Choose the right location. Select a level, well-drained area with ample space for the pool. Avoid areas with overhead power lines or tree roots.
2. Prepare the ground. Level the ground and remove any debris or sharp objects. If the ground is soft, compact it with a tamper.
3. Spread the ground cloth. Place the provided ground cloth over the prepared area. This will protect the bottom of the pool from punctures.
4. Set up the pool base. Unfold the pool base and spread it out on the ground cloth. Adjust the corners to ensure it is square.
5. Install the pool liner. Unfold the pool liner and carefully place it inside the pool base. Align the liner with the corners and smooth out any wrinkles.
6. Inflate the pool ring. Using an air pump, inflate the pool ring until it reaches the recommended pressure indicated on the pool. Connect the pump to the intake valve on the pool ring.
7. Fill the pool with water. Slowly fill the pool with water up to the indicated level. Use a hose or bucket to avoid damaging the pool liner.
8. Connect the filter pump. Connect the filter pump to the intake and outlet valves on the pool. Ensure the connections are secure and tighten the clamps.
9. Circulate the water. Turn on the filter pump and allow it to circulate the water for at least 24 hours before swimming.
People Also Ask About Bestway Pool Set Up Instructions
How long does it take to set up a Bestway pool?
What tools do I need to set up a Bestway pool?
A screwdriver, a level, a tamper, an air pump, a hose, and a bucket.
What is the recommended water level for a Bestway pool?
The water level should be at least 1 inch below the top of the pool ring.
How often should I change the water in my Bestway pool?
Depending on the frequency of use and the cleanliness of the pool, the water should be changed every 2-4 weeks.
