Are you a pet owner who’s tired of dealing with pet hair, stains, and odors on your carpets? If so, then you need the Bissell Proheat Pet Turbo. This powerful carpet cleaner is specifically designed to tackle the tough cleaning challenges that come with owning pets. With its innovative features and easy-to-use design, the Bissell Proheat Pet Turbo will make your carpets look and smell their best, even with the most active pets.
The Bissell Proheat Pet Turbo comes with a variety of features that make it the perfect choice for pet owners. These features include a large capacity tank that can hold up to 1 gallon of water, a powerful suction motor that can remove even the most stubborn dirt and debris, and a heated cleaning system that helps to loosen dirt and stains. The Bissell Proheat Pet Turbo also comes with a variety of attachments that can be used to clean different types of surfaces, including stairs, upholstery, and even car interiors.
Using the Bissell Proheat Pet Turbo is easy. Simply fill the tank with water and cleaning solution, attach the desired attachment, and start cleaning. The Bissell Proheat Pet Turbo will do the rest, leaving your carpets looking and smelling their best. So, if you’re looking for a powerful and easy-to-use carpet cleaner that can handle the tough cleaning challenges that come with owning pets, then the Bissell Proheat Pet Turbo is the perfect choice for you.
Assembly and Preparation
Assembling the Machine
Getting your Bissell Proheat Pet Turbo ready for use is a breeze! Let’s dive into the assembly step-by-step:
1. Attach the handle to the base: Align the handle with the base and insert it into the designated grooves. Ensure it’s securely locked in place.
2. Install the clean water tank: Locate the clean water tank and fill it with clean, warm water. Insert the tank into the machine, making sure it fits snugly.
3. Connect the hoses: Now, it’s time to connect the hoses. Attach the solution hose to the detergent tank and then connect the other end to the cleaning head. Similarly, attach the spray hose to the water tank and the other end to the cleaning head.
4. Add cleaning solution: Fill the detergent tank with the recommended amount of Bissell pet cleaning solution or any other pet-friendly formula. Avoid overfilling to prevent foaming.
5. Attach the cleaning head: Lastly, attach the cleaning head to the front of the machine by sliding it into place. Make sure it’s securely fastened.
Preparing for Cleaning
Before you embark on your cleaning adventure, take a moment to prepare the area:
1. Clear the floor: Remove any obstacles or loose items from the surface to be cleaned to avoid hindering the machine’s movement.
2. Pre-treat heavily soiled areas: For stubborn stains or heavily soiled areas, apply a pet cleaning solution to the spot and allow it to soak in for a few minutes before starting the cleaning process.
3. Test the machine: Always test the machine on an inconspicuous area before cleaning a larger surface to ensure there are no adverse reactions or color changes.
Filling the Solution Tank
The Bissell Proheat Pet Turbo is a powerful carpet cleaner that can remove dirt, stains, and pet hair from carpets and upholstery. To use the Proheat Pet Turbo, you’ll need to fill the solution tank with a cleaning solution. Here’s how to do it:
Step 1: Gather your supplies
You’ll need the following supplies to fill the solution tank:
- Bissell Proheat Pet Turbo carpet cleaner
- Bissell Proheat Pet Turbo cleaning solution
- Measuring cup
Step 2: Fill the solution tank
To fill the solution tank, follow these steps:
- Locate the solution tank on the back of the carpet cleaner.
- Remove the solution tank by pulling it straight up.
- Fill the solution tank with hot tap water up to the fill line.
- Add the Bissell Proheat Pet Turbo cleaning solution to the solution tank according to the instructions on the bottle.
- Replace the solution tank on the carpet cleaner.
Pro Tip: For best results, use Bissell Proheat Pet Turbo cleaning solution. This solution is specifically designed to work with the Proheat Pet Turbo and will help to remove dirt, stains, and pet hair from carpets and upholstery.
Cleaning Solution Amount to Add Bissell Proheat Pet Turbo Cleaning Solution 2 ounces per gallon of water Attaching the Cleaning Tool
The first step in using the Bissell Proheat Pet Turbo is to attach the cleaning tool. The cleaning tool is a specialized tool designed to clean pet hair and other pet-related messes. To attach the cleaning tool, follow these steps:
- Locate the cleaning tool attachment point on the front of the machine.
- Align the cleaning tool with the attachment point and insert it.
- Turn the cleaning tool clockwise to lock it into place.
Connecting the Hose and Tools
Once the cleaning tool is attached, you can connect the hose and tools. The hose is a flexible tube that allows you to reach difficult areas with the cleaning tool. The tools are a variety of attachments that can be used for different cleaning tasks. To connect the hose and tools, follow these steps:
- Locate the hose connection point on the back of the machine.
- Insert the end of the hose into the connection point.
- Turn the hose clockwise to lock it into place.
- Attach the desired tool to the end of the hose.
Recommended Cleaning Tools for Pet Owners
Tool Description Pet Hair Tool Designed to remove pet hair from carpets and upholstery. Stair Tool Ideal for cleaning pet hair and other dirt from stairs. Upholstery Tool Perfect for cleaning pet hair and stains from furniture. Selecting the Cleaning Mode
Automatic Mode
Automatic mode is the simplest and most convenient option for most cleaning tasks. The machine will automatically adjust the water and suction power based on the surface it’s cleaning.
Manual Mode
Manual mode gives you greater control over the machine’s settings. You can select the Water Level and Suction Power options independently. This mode is useful for deep cleaning or for cleaning specific types of surfaces.
Water Level Options
The Water Level option controls the amount of water that is sprayed onto the surface being cleaned. The higher the water level, the more water will be used and the deeper the clean will be.
Water Level Use Low For light cleaning or delicate surfaces Medium For general cleaning High For deep cleaning or heavily soiled surfaces Suction Power Options
The Suction Power option controls the amount of suction used to remove water and dirt from the surface being cleaned. The higher the suction power, the more water and dirt will be removed.
Suction Power Use Low For light cleaning or delicate surfaces Medium For general cleaning High For deep cleaning or heavily soiled surfaces Vacuuming
Before using the Bissell Proheat Pet Turbo, it’s essential to vacuum the carpet thoroughly. This removes loose dirt, debris, and pet hair, making the carpet cleaning process more effective. Vacuum both in the direction of the pile and against it to capture all the dirt.
Cleaning
1. Prepare the Machine
Fill the clean water tank with hot tap water and add the recommended amount of Bissell Pet Pro carpet cleaning formula. Then, attach the cleaning head to the machine.
2. Test in an Inconspicuous Area
Always test the cleaning solution in an inconspicuous area of the carpet to ensure it doesn’t damage the fibers or cause discoloration.
3. Begin Cleaning
Start by slowly pushing the machine forward over the carpet, overlapping each pass slightly. Avoid over-wetting the carpet, as this can leave a residue or cause the carpet to take longer to dry.
4. Rinse and Extract
Release the clean water solution by pressing the trigger on the handle. The machine will automatically rinse and extract the dirty water and cleaning residue.
5. Specialized Pet Turbo Tool
The Bissell Proheat Pet Turbo features a specialized Pet Turbo Tool designed to tackle stubborn pet stains and odors. Attach the tool to the machine and follow these steps:
- Apply the cleaning solution directly onto the stain.
- Use the Pet Turbo Tool to agitate the solution deep into the carpet fibers.
- Hold the tool over the stain for 15-30 seconds to allow the solution to penetrate.
- Rinse and extract the solution as usual.
Stain Type Treatment Urine Blot excess liquid. Apply cleaning solution and use Pet Turbo Tool. Feces Remove solid matter. Blot liquid. Apply cleaning solution and use Pet Turbo Tool. Vomits Remove solids. Blot liquid. Apply cleaning solution and use Pet Turbo Tool. Emptying the Dirty Water Tank
To ensure optimal performance of your Bissell Proheat Pet Turbo, it’s crucial to regularly empty the dirty water tank. Follow these steps for effective tank emptying:
-
Unplug the machine: Before handling the tank, ensure the device is disconnected from the power outlet.
-
Locate the tank: The dirty water tank is typically located at the rear of the machine. Refer to your user manual for the exact position.
-
Remove the tank: Grasp the designated handle or latch on the tank and pull it straight up to detach it.
-
Dump the dirty water: Carry the tank to a designated disposal area, such as a sink or toilet, and pour out the dirty water.
-
Rinse the tank: Use clean water to thoroughly rinse the interior and exterior of the tank, removing any remaining debris or cleaning solution.
-
Reinsert the tank: Once the tank is clean and dry, align it with the designated slot in the machine and push it down firmly to secure it.
Tips for Efficient Emptying:
-
Empty the dirty water tank after each use to prevent odors and maintain suction efficiency.
-
Use a mild cleaning solution or vinegar to disinfect the tank and eliminate any lingering bacteria.
-
If you notice any debris or blockages in the tank, remove them and clean the machine thoroughly before use.
Cleaning and Maintaining the Brush Roll
Follow these simple steps to ensure optimal performance of your Bissell Proheat Pet Turbo’s brush roll:
1. Remove the Brush Roll
Unplug the machine and lay it on its side. Locate the two screws holding the brush roll cover in place and remove them. Carefully lift off the cover to expose the brush roll.
2. Clean the Brush Roll Debris Tray
Slide the debris tray out from the base of the brush roll. Empty any accumulated debris and rinse it thoroughly with water.
3. Remove Tangled Hair and Debris
Using scissors or a utility knife, carefully cut away any tangled hair or debris wrapped around the brush roll. Be cautious not to cut the bristles.
4. Wipe Down the Brush Roll
Use a damp cloth to wipe down the brush roll, removing any dirt or grime buildup.
5. Lubricate the Brush Roll Bearings
Apply a small amount of lubricant (provided with the vacuum) to the brush roll bearings. This will help keep them running smoothly.
6. Inspect the Brush Roll
Look for any signs of damage or wear on the brush roll. If you notice any issues, replace the brush roll with a new one.
7. Reassemble the Brush Roll
Place the brush roll back into the base of the vacuum and carefully insert the debris tray. Align the brush roll cover and secure it with the screws. The following table provides a detailed checklist for cleaning and maintaining the brush roll:
Step Task 1 Unplug the machine and lay it on its side. 2 Locate and remove the two screws holding the brush roll cover in place. 3 Carefully lift off the cover to expose the brush roll. 4 Slide the debris tray out from the base of the brush roll. 5 Empty any accumulated debris and rinse it thoroughly with water. 6 Using scissors or a utility knife, carefully cut away any tangled hair or debris wrapped around the brush roll. 7 Use a damp cloth to wipe down the brush roll, removing any dirt or grime buildup. 8 Apply a small amount of lubricant to the brush roll bearings. 9 Inspect the brush roll for any signs of damage or wear. 10 Place the brush roll back into the base of the vacuum and carefully insert the debris tray. 11 Align the brush roll cover and secure it with the screws. Troubleshooting Common Issues
The Machine is Not Spraying Solution
Check if the solution tank is empty or if the nozzle is clogged. Clean the nozzle with a pin or toothpick and refill the tank.
The Machine is Not Cleaning Effectively
Check if the brushes are worn out or dirty. Replace the brushes if necessary and clean them regularly.
The Machine is Leaking Water
Inspect the hoses and connections for leaks. Tighten any loose connections and replace damaged hoses.
The Machine is Making a Loud Noise
Check if there is debris stuck in the fan or pump. Clean the machine thoroughly and remove any obstructions.
The Machine is Not Drying Properly
Check if the suction hose is clogged or if the filter is dirty. Clean the hose and replace the filter as needed.
The Machine is Not Turning On
Check if the power cord is plugged into an outlet and if the circuit breaker has tripped. Reset the circuit breaker if necessary.
The Machine is Overheating
Stop using the machine and let it cool down. Check if the air vents are blocked and clean them if necessary.
The Machine is Displaying Error Codes
Refer to the user manual for specific error codes and troubleshooting steps. If the error persists, contact Bissell customer support.
Error Code Description Troubleshooting Steps E01 Low water level Refill the solution tank E02 Nozzle clogged Clean the nozzle with a pin or toothpick E03 Internal error Contact Bissell customer support Storage and Maintenance
Daily Maintenance
After each use, it is important to empty the dirty water tank and rinse both the clean and dirty water tanks. This will help prevent mold and bacteria growth.
Weekly Maintenance
Once a week, clean the Pet Hair Strainer and the Clean Water Tank. To clean the Pet Hair Strainer, remove it from the bottom of the machine and rinse it under water. To clean the Clean Water Tank, remove it from the machine and wash it with warm, soapy water.
Monthly Maintenance
Once a month, clean the Brushroll and the Belts. To clean the Brushroll, remove it from the machine and vacuum it. To clean the Belts, wipe them down with a damp cloth.
Storing the Bissell ProHeat Pet Turbo
When not in use, store the Bissell ProHeat Pet Turbo in a cool, dry place. Empty the water tanks and let the machine dry completely before storing it.
Additional Tips
To prolong the life of your Bissell ProHeat Pet Turbo, follow these additional tips:
Tip Frequency Clean the Brushroll Once a week Clean the Clean Water Tank Once a week Clean the Pet Hair Strainer Once a week Clean the Belts Once a month Empty the dirty water tank After each use Rinse the dirty water tank After each use Store the machine in a cool, dry place When not in use Let the machine dry completely before storing When not in use Use the correct cleaning solution See manufacturer’s recommendations Filling the Clean Water Tank
Fill the clean water tank with hot tap water to the “Fill” line. Avoid using boiling water, as it can damage the machine.
Adding Cleaning Solution
Add the recommended amount of Bissell Proheat Pet Turbo cleaning solution to the clean water tank, according to the instructions on the bottle.
Assembling the Cleaning Head
Attach the cleaning head to the wand and secure it firmly.
Attaching the Wand and Hose
Insert the wand into the base of the machine and connect the hose to the back of the cleaning head.
Selecting the Cleaning Mode
Choose the appropriate cleaning mode for your flooring type: “Carpet” or “Hard Floor”.
Starting the Machine
Turn on the machine by pressing the power button. The machine will automatically begin dispensing cleaning solution.
Cleaning in Carpet Mode
Slowly move the cleaning head back and forth over the carpet surface, applying even pressure. Repeat until the carpet is clean.
Cleaning in Hard Floor Mode
Gently push the cleaning head forward and backward across the hard floor surface. Avoid applying too much pressure, as this can damage the floor.
Emptying the Dirty Water Tank
When the dirty water tank is full, an indicator light will illuminate. Turn off the machine and empty the tank into a toilet or sink.
Cleaning the Machine
After each use, rinse the clean water tank and empty the dirty water tank. Remove the cleaning head and rinse it thoroughly with water. Clean the exterior of the machine with a damp cloth.
Tips for Optimal Performance
- Use hot tap water, as it enhances cleaning effectiveness.
- Avoid overfilling the clean water tank.
- Use the recommended amount of cleaning solution.
- Move the cleaning head slowly and evenly over the surface.
- Apply even pressure during cleaning.
- Rinse the cleaning head thoroughly after each use.
- Empty the dirty water tank when the indicator light illuminates.
- Clean the machine regularly to maintain optimal performance.
- Use a Bissell microfiber cleaning pad for enhanced cleaning results.
- For heavily soiled carpets, consider using a carpet cleaning attachment.
Bissell Proheat Pet Turbo: A Comprehensive Guide to Use and Maintenance
The Bissell Proheat Pet Turbo is a top-rated carpet cleaner specifically designed to tackle the challenges of pet ownership. With its powerful suction, advanced cleaning technology, and user-friendly features, it offers a deep clean that removes dirt, grime, stains, and pet odors effectively. In this comprehensive guide, we will delve into the step-by-step instructions on how to use the Bissell Proheat Pet Turbo, including its cleaning modes, formula usage, and maintenance tips.
To begin using the Bissell Proheat Pet Turbo, assemble the machine according to the user manual. Fill the clean water tank with warm water and add the recommended amount of Bissell Proheat Pet Turbo cleaning formula. Attach the cleaning head to the machine and switch it on. Select the desired cleaning mode based on the level of cleaning required. For regular cleaning, the Express Clean mode is recommended, while the Deep Clean mode is ideal for heavily soiled areas.
Start cleaning by gliding the machine forward and backward over the carpet surface. The rotating brush head loosens and lifts dirt and debris, while the powerful suction removes it from the carpet. For stubborn stains, use the Spot & Stain tool to apply extra cleaning solution directly to the affected area. Rinse the carpet thoroughly using clean water until the rinse water runs clear. Allow the carpet to dry completely before walking or placing furniture on it.
Maintaining the Bissell Proheat Pet Turbo is essential for optimal performance. After each use, empty and rinse the dirty water tank. Clean the brush head by removing any tangled hair or debris. Regularly check and clean the filter to prevent clogging and ensure optimal suction. Empty the clean water tank and store the machine upright when not in use. By following these maintenance tips, you can extend the life of your Bissell Proheat Pet Turbo and keep your carpets looking their best.
People Also Ask About Bissell Proheat Pet Turbo How To Use
How do I clean the Bissell Proheat Pet Turbo?
To clean the Bissell Proheat Pet Turbo, follow these steps:
- Empty and rinse the dirty water tank.
- Clean the brush head by removing any tangled hair or debris.
- Regularly check and clean the filter.
- Empty the clean water tank and store the machine upright when not in use.
What cleaning formula should I use with the Bissell Proheat Pet Turbo?
It is recommended to use the Bissell Proheat Pet Turbo cleaning formula with the machine. This formula is specifically designed to remove pet odors and stains effectively.
How often should I clean my carpet with the Bissell Proheat Pet Turbo?
The frequency of carpet cleaning depends on the level of traffic and pet activity. For heavily soiled areas, it is recommended to clean your carpet every 1-2 weeks. For regular maintenance, cleaning every 2-3 months is sufficient.
