So you want the Edge Transit, huh? Well, my friend, you’ve come to the right place. In this article, I’m going to tell you everything you need to know about this awesome weapon, including how to get it, what it’s good for, and how to make the most of its unique perks. So sit back, relax, and get ready to learn everything you need to know about the Edge Transit.
The Edge Transit is a legendary grenade launcher that can be obtained as a random drop from any activity in the game. It’s a great weapon for taking out groups of enemies, and it can also be used to great effect against bosses. One of the things that makes the Edge Transit so special is its unique perk, High-Velocity Rounds. This perk gives the Edge Transit increased range and velocity, making it a great choice for taking out enemies at long distances. Additionally, the Edge Transit has a very fast reload speed, which makes it great for sustained fire. Overall, the Edge Transit is a great weapon for any player who wants a powerful and versatile grenade launcher. However, it is worth noting that the Edge Transit is not a guaranteed drop, so you may have to do some grinding before you get your hands on one. But trust me, it’s worth the effort.
Now that you know how to get the Edge Transit, let’s talk about how to use it. The Edge Transit is a great weapon for taking out groups of enemies, so try to use it in situations where you’ll be facing multiple foes. The Edge Transit is also a great weapon for taking out bosses, so don’t be afraid to use it against them. Additionally, the Edge Transit can be used to great effect in PvP, so don’t be afraid to take it into the Crucible. With its powerful grenades and fast reload speed, the Edge Transit is a great weapon for any player who wants to dominate the competition.
Find the Edge Router
The first step to getting the Edge Transit weapon is to find an Edge Router. Edge Routers are located in the Lost Sector of the European Dead Zone (EDZ), which is called “The Salt Mines”. To get to the Salt Mines, follow these steps:
- Spawn at the Trostland landing zone in the EDZ.
- Head north towards the large building in the distance.
- Enter the building and go to the back room.
- Use the elevator to go down to the lower level.
- Follow the path to the end and you will find the Salt Mines.
Once you are in the Salt Mines, you will need to find the Edge Router. The Edge Router is located in the back of the Lost Sector, behind a large door. To open the door, you will need to find three power cells and insert them into the slots next to the door.
The power cells are located in the following locations:
| Power Cell Location | Description |
|---|---|
| Near the beginning of the Lost Sector | On a platform to the left |
| In the middle of the Lost Sector | On a platform above the main path |
| Near the end of the Lost Sector | On a platform to the right |
Once you have inserted all three power cells into the slots, the door will open and you will be able to enter the room with the Edge Router.
Connect to the Edge Router
To connect to the Edge Router, follow these steps:
1. Get the Edge Router’s IP Address
Find the IP address of the Edge Router. This can usually be found on a sticker on the bottom or back of the router. If you can’t find the IP address, you can try to log in to the router’s web interface using the default username and password. The default username and password are usually “admin” and “password”.
2. Open a Web Browser
Open a web browser on your computer or mobile device. In the address bar, type the IP address of the Edge Router. This will open the router’s web interface.
3. Log In to the Router’s Web Interface
Enter the username and password for the router. The default username and password are usually “admin” and “password”.
4. Navigate to the Configuration Page
Once you are logged in to the router’s web interface, navigate to the configuration page. The configuration page may be called “Settings” or “Configuration”.
5. Find the Edge Transit Settings
On the configuration page, find the Edge Transit settings. These settings may be located under the “Networking” or “WAN” tab.
6. Enable Edge Transit
To enable Edge Transit, check the “Enable Edge Transit” checkbox. You may also need to enter the IP address of the Edge Transit gateway. The IP address of the Edge Transit gateway can be found on the Edge Transit website.
7. Save Your Changes
Once you have made your changes, click the “Save” button. Your changes will be saved and Edge Transit will be enabled on your Edge Router.
| Step | Action |
|---|---|
| 1 | Get the Edge Router’s IP address |
| 2 | Open a web browser |
| 3 | Log in to the router’s web interface |
| 4 | Navigate to the configuration page |
| 5 | Find the Edge Transit settings |
| 6 | Enable Edge Transit |
| 7 | Save your changes |
Configure the Edge Router
After importing the Ansible role, you can configure the edge router by creating a playbook that defines the tasks to be performed on the edge router. The following is an example of a playbook that configures the edge router with a static IP address and gateway:
“`yaml
– hosts: edge_router
tasks:
– name: Configure static IP address
juniper_junos_config:
host: “{{ ansible_host }}”
username: “{{ username }}”
password: “{{ password }}”
config_text: |
set interfaces xe-0/0/0 unit 0 family inet address 192.168.1.1/24
– name: Configure default gateway
juniper_junos_config:
host: “{{ ansible_host }}”
username: “{{ username }}”
password: “{{ password }}”
config_text: |
set routing-options static route 0.0.0.0/0 next-hop 192.168.1.254
“`
In this playbook, the `juniper_junos_config` module is used to configure the edge router. The `host` parameter specifies the IP address or hostname of the edge router, and the `username` and `password` parameters specify the credentials to use for authentication. The `config_text` parameter specifies the Junos configuration commands to be executed on the edge router. In this example, the first task configures a static IP address on the xe-0/0/0 interface, and the second task configures a default gateway.
Once you have created the playbook, you can execute it using the following command:
“`
ansible-playbook -i inventory.yaml playbook.yaml
“`
Add the Edge Transit Gateway
To add the Edge Transit Gateway, follow these steps:
- In the Edge Transit Service page, click Create Edge Transit Gateway.
- Enter a name and description for the gateway.
- Select the region where you want to create the gateway.
- Choose the network and subnet where you want to create the gateway. The network you choose must be in the same region as the gateway. The subnet you choose must be a regional subnet.
| Name | Description |
|---|---|
| Edge Transit Gateway | A managed Layer 3 service that connects virtual networks in different regions and connects on-premises networks to the Google Cloud Platform. |
| Region | The region where the Edge Transit Gateway will be created. |
| Network | The network that the Edge Transit Gateway will be attached to. |
| Subnet | The subnet that the Edge Transit Gateway will be attached to. |
- Click Create.
The Edge Transit Gateway will be created and will be visible in the Edge Transit Service page.
Enable BGP on the Edge Transit Gateway
To enable Border Gateway Protocol (BGP) on the Edge Transit Gateway, follow these steps:
-
Navigate to the Edge Transit Gateway page:
Log into the AWS Management Console and go to the Amazon VPC console. In the left navigation pane, choose Transit Gateways. -
Select the Edge Transit Gateway:
From the list of transit gateways, select the Edge Transit Gateway you want to enable BGP on. -
Click on "Edit":
This will open the "Edit Transit Gateway" page. -
Scroll down to "BGP Settings":
Under the "General" tab, scroll down to the "BGP Settings" section. -
Specify the Autonomous System Number (ASN):
In the "BGP ASN" field, specify the ASN that you want to use for the Edge Transit Gateway. The ASN must be a unique 16-bit number that is used to identify your BGP network. Choose an ASN that is not already in use in your network. -
Set the BGP Peer IP Address:
In the "BGP Peer IP Address" field, specify the IP address of the BGP peer that you want to establish a connection with. This is typically the IP address of the on-premises router or the BGP speaker in the other AWS account. -
Configure the BGP Network Ranges:
In the "BGP Network Ranges" section, you can specify the network ranges that you want to advertise over BGP. You can add multiple network ranges by clicking on the "Add" button. -
Click on "Save":
After you have configured the BGP settings, click on the "Save" button at the bottom of the page to apply the changes.
Configure the VPCs and Subnets
Step 1: Create Two VPCs
Begin by creating two VPCs with different CIDR blocks. One VPC will serve as the transit VPC, while the other will be the destination VPC. Ensure that both VPCs have sufficient IP address space to accommodate your workload.
Step 2: Set Up Subnets within VPCs
Within each VPC, create at least one public subnet and one private subnet. The public subnets will allow internet access for outbound connections, while the private subnets will be protected from the internet.
Step 3: Enable DNS Resolution
Ensure that DNS resolution is enabled for both VPCs. This will allow instances within the VPCs to resolve hostnames to IP addresses.
Step 4: Configure Peering Connections
Establish peering connections between the transit VPC and the destination VPC. This will allow traffic to flow between the two VPCs.
Step 5: Modify VPC Route Tables
Update the route tables associated with the subnets in both VPCs. Add a route to the destination VPC’s CIDR block through the transit VPC’s gateway. This will direct traffic destined for the destination VPC to flow through the transit VPC.
Step 6: Detailed Routing Configuration Options
To further customize routing behavior, you can modify the route tables based on your specific requirements. Here are some common options:
| Option | Description |
|---|---|
| Default Route | Use a default route to forward all traffic destined outside of the VPC to the transit gateway or internet gateway. |
| Subnet-Specific Routes | Create subnet-specific routes to direct traffic from specific subnets to specific destinations, bypassing the default route. |
| Route Propagation | Propagate routes from connected VPCs into the transit VPC. This allows instances in the transit VPC to access resources in the connected VPCs. |
Monitor the Edge Transit Gateway
You can monitor the status of your Edge Transit Gateway using the following methods:
1. Google Cloud console
You can view the status of your Edge Transit Gateways in the Google Cloud console. To do this:
- Go to the Edge Transit Gateways page in the Google Cloud console.
- In the list of Edge Transit Gateways, select the Edge Transit Gateway that you want to monitor.
- The Status column shows the current status of the Edge Transit Gateway.
2. gcloud
You can use the `gcloud` command-line tool to monitor the status of your Edge Transit Gateways. To do this:
- Install the `gcloud` command-line tool.
- Run the following command:
- Enable the Monitoring API.
- Create a Monitoring API client.
- Send a request to the Monitoring API.
- Enable Cloud Logging.
- Filter the logs by the resource type “edge_transit_gateway”.
- Enable Stackdriver Monitoring.
- Create a Stackdriver Monitoring dashboard.
- Add the metrics for your Edge Transit Gateways to the dashboard.
- Enable Cloud Trace.
- Filter the traces by the resource type “edge_transit_gateway”.
- Enable error reporting.
- Filter the errors by the service “edge_transit_gateway”.
- Enable service usage.
- Filter the usage by the service “edge_transit_gateway”.
- Enable billing.
- Filter the costs by the project ID that your Edge Transit Gateways are in.
- Reach rank 5 with Zavala or Shaxx.
- Receive Edge Transit as a random reward from Zavala or Shax rank-up packages.
- Strikes
- Nightfalls
- Crucible matches
- Chambered Compensator + Accurized Rounds + Feeding Frenzy + Rampage
- Arrowhead Brake + Liquid Coils + Feeding Frenzy + Multikill Clip
“`
gcloud edge-transit gateways describe
“`
3. Monitoring API
You can use the Monitoring API to programmatically access the status of your Edge Transit Gateways. To do this:
4. Cloud Logging
You can use Cloud Logging to view the logs of your Edge Transit Gateways. To do this:
5. Stackdriver Monitoring
You can use Stackdriver Monitoring to view the metrics of your Edge Transit Gateways. To do this:
6. Cloud Trace
You can use Cloud Trace to view the traces of your Edge Transit Gateways. To do this:
7. Error reporting
You can use error reporting to view the errors of your Edge Transit Gateways. To do this:
8. Service usage
You can use service usage to view the usage of your Edge Transit Gateways. To do this:
9. Billing
You can use billing to view the costs of your Edge Transit Gateways. To do this:
10. Aggregation
The Edge Transit Gateway Service API supports aggregation for the `GetGateway` and `ListGateways` methods. Aggregation allows you to retrieve multiple resources by using a single API call. This can improve performance by reducing the number of API calls that you need to make.
| Field | Description |
|---|---|
| parent | The parent, which owns this collection of gateways. |
| pageSize | The maximum number of items to return. |
| pageToken | The next_page_token value returned from a previous List request, if any. |
| filter | A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <. For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance. |
| orderBy | Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using orderBy=”createTime desc”. This sorts results based on the `createTime` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `createTime desc` is supported. |
D2 How To Get Edge Transit
To obtain the Edge Transit fusion rifle in Destiny 2, players must complete the following steps:
Alternatively, players can purchase Edge Transit from the Gunsmith using Gunsmith Materials.
People Also Ask About D2 How To Get Edge Transit
How to get Edge Transit catalyst?
Edge Transit catalyst can be obtained by completing the following activities:
What is the best Edge Transit roll?
The best Edge Transit roll depends on the player’s playstyle and preferences. Some popular rolls include:
