A compound bow is a popular choice for both recreational and competitive archery. Adjusting the draw weight of a compound bow is important for ensuring accuracy and consistency. The draw weight is the amount of force required to draw the bowstring back to the anchor point. By adjusting the draw weight, you can tailor the bow to your individual strength and shooting style. Adjusting the draw weight on a compound bow is relatively simple, but it’s important to follow the manufacturer’s instructions carefully to avoid damaging the bow.
In order to reduce the draw weight, use a draw weight scale to measure the current draw weight of the bow. Loosen the draw weight by one or two turns on the limb bolts, which connect the limbs to the riser. As you unscrew the bolts, the limbs will become closer together, reducing the draw weight. After adjusting the bolts, tighten them back down and re-measure the draw weight using the scale. Repeat this process until the desired draw weight is achieved. To increase the draw weight, simply reverse the process by tightening the limb bolts. As you tighten the bolts, the limbs will move further apart, increasing the draw weight. Remember to follow the manufacturer’s instructions carefully as overtightening the limb bolts can damage the bow.
After adjusting the draw weight, it’s important to test the bow by shooting a few arrows. Make sure the bow is stable and well-balanced, and that there is no excessive vibration. Adjust the draw weight as needed until the bow feels comfortable and shoots accurately. By following these steps, you can ensure that your compound bow is properly adjusted for your individual needs.
How to Adjust Draw Weight on a Compound Bow
Adjusting the draw weight on a compound bow is a relatively simple process that can be done in a few minutes. By following these steps, you can ensure that your bow is set to the correct weight for your shooting needs.
- Locate the draw weight adjustment bolts. These bolts are usually located on the riser of the bow, near the limb pockets. They are typically marked with a “DW” or “DW Adj” label.
- Use an Allen wrench to turn the draw weight adjustment bolts. Turning the bolts clockwise will increase the draw weight, while turning them counterclockwise will decrease the draw weight.
- Adjust the draw weight in small increments. Start by making small adjustments to the draw weight, such as 1/4 turn at a time. This will help you avoid over-adjusting the bow.
- Check the draw weight after each adjustment. Use a bow scale to measure the draw weight of the bow. The draw weight should be within the recommended range for your bow and your shooting style.
- Once you have set the draw weight to the desired setting, tighten the draw weight adjustment bolts. This will help keep the bow in the correct setting.
People Also Ask About How to Adjust Draw Weight on a Compound Bow
How often should I adjust the draw weight on my compound bow?
The draw weight on your compound bow should be adjusted as needed to match your shooting style and ability. As you become a more experienced archer, you may want to increase the draw weight to increase your arrow speed and accuracy. However, it is important to avoid over-adjusting the bow, as this can lead to injury.
Can I adjust the draw weight on my compound bow myself?
Yes, you can adjust the draw weight on your compound bow yourself. However, it is important to follow the instructions in the bow’s owner’s manual carefully. If you are not comfortable adjusting the draw weight yourself, you can take your bow to a qualified archery shop for assistance.
What is the recommended draw weight for a compound bow?
The recommended draw weight for a compound bow varies depending on your age, strength, and shooting style. For beginners, a draw weight of 30-40 pounds is a good starting point. As you become a more experienced archer, you may want to increase the draw weight to 45-55 pounds or higher.
