OnStar is a popular vehicle telematics system that offers a variety of features, including navigation, emergency assistance, and remote diagnostics. However, some drivers may find that they do not need or want these features, and they may wish to disable OnStar. Disabling OnStar is a relatively simple process that can be completed in a few steps.
The first step is to press the OnStar button in your vehicle. This button is typically located on the ceiling or rearview mirror. Once you have pressed the button, you will be connected to an OnStar advisor. The advisor will ask you for your account information and will then proceed to disable OnStar. Once OnStar has been disabled, you will no longer be able to use any of its features.
If you decide that you want to reactivate OnStar, you can do so by pressing the OnStar button again. You will then be prompted to enter your account information. Once you have entered your information, OnStar will be reactivated and you will be able to use all of its features again.
Deactivating OnStar Remote Services
OnStar is a subscription-based service that provides various safety features and remote access to your vehicle. If you no longer wish to use these services, you can deactivate your OnStar account and cancel your subscription. Here are two ways to deactivate OnStar Remote Services.
Through the OnStar Mobile App
- Open the OnStar mobile app and log in to your account.
- Tap the “Profile” tab and then select “Manage Subscription.”
- Tap the “Cancel Subscription” button and follow the on-screen instructions.
Through the OnStar Customer Care Center
- Contact the OnStar Customer Care Center at 1-888-466-7827.
- Provide the representative with your account information, including your vehicle’s VIN.
- Request to deactivate OnStar Remote Services and cancel your subscription.
- Locate the OnStar button on your dashboard or steering wheel.
- Disconnect the negative terminal of your vehicle’s battery.
- Find the wiring harness connected to the button and unplug it.
- Remove the button from its mounting.
- Reconnect the negative terminal of your vehicle’s battery and test the button to ensure it’s no longer functioning.
Removing OnStar Antenna
The OnStar antenna is typically located on the roof or trunk of your vehicle. Follow these steps to remove it:
- Locate the OnStar antenna on your vehicle. It’s usually a small black or gray dome-shaped device.
- Gently pry off the antenna base with a flat-head screwdriver or a plastic pry tool.
- Disconnect the antenna cable from the base.
- Remove the antenna base from the vehicle’s roof or trunk.
Additional Steps to Disable OnStar
In addition to removing the OnStar button and antenna, you may also need to take the following steps to fully disable OnStar:
- Cancel your OnStar subscription: Contact OnStar at (888) 466-7827 or visit the OnStar website to cancel your subscription.
- Remove the OnStar module: The OnStar module is usually located under the dashboard or behind the glove box. Disconnect the module and remove it from the vehicle.
- Reset your vehicle’s computer: Once the OnStar module is removed, reset your vehicle’s computer to clear any remaining OnStar data. Consult your vehicle’s owner’s manual for specific instructions on how to reset the computer.
Canceling OnStar Account Online
If you no longer need OnStar’s services, you can cancel your account online. Here are the steps:
- Go to the OnStar website and log in to your account.
- Click on the “My Account” tab.
- Scroll down to the “My Services” section and click on the “Cancel Services” link.
- Select the reason for canceling your account and click on the “Submit” button.
Your OnStar account will be canceled immediately. You will receive a confirmation email from OnStar within 24 hours.
**Note:** If you have any outstanding balance on your OnStar account, you will need to pay it before you can cancel your account.
Disconnecting OnStar Diagnostic Module
The OnStar diagnostic module is a small device that is installed in your vehicle. It collects data about your vehicle’s performance and sends it to OnStar, which can then use this data to provide you with a variety of services, such as remote diagnostics, roadside assistance, and stolen vehicle tracking. If you are not interested in using these services, you can disconnect the OnStar diagnostic module by following these steps:
1. Locate the OnStar diagnostic module.
The OnStar diagnostic module is usually located under the dashboard of your vehicle. It is a small, black box with a blue light on the front. If you cannot find the module, consult your vehicle’s owner’s manual.
2. Remove the module.
To remove the module, simply disconnect the wiring harness from the module and then pull the module out of its socket. You may need to use a small screwdriver to release the module.
3. Reset the vehicle’s computer.
Once the module is disconnected, you need to reset the vehicle’s computer. To do this, disconnect the negative battery terminal and wait for 10 minutes. Then, reconnect the battery terminal and start the vehicle.
4. Verify that the module is disconnected.
To verify that the module is disconnected, try to use one of the OnStar services. If the service does not work, then the module is successfully disconnected.
5. Additional notes:
If you are leasing your vehicle, you should check with your leasing company before disconnecting the OnStar diagnostic module. Some leasing companies require that the module remain connected. Additionally, if you are selling your vehicle, you should inform the buyer that the OnStar diagnostic module has been disconnected.
Unplugging OnStar Power Harness
Follow these steps to unplug the OnStar power harness:
- Locate the OnStar module. It is usually located under the dash, behind the glove box.
- Disconnect the negative battery terminal.
- Remove the trim panel covering the OnStar module.
- Locate the OnStar power harness. It is a black connector with a blue locking tab.
- Press the locking tab and pull the connector straight out.
- Once the harness is disconnected, the OnStar system will be disabled. You can now reconnect the negative battery terminal and replace the trim panel.
Additional Notes:
The OnStar power harness is typically located on the passenger side of the vehicle, under the dash. It may be necessary to remove some screws or bolts to access the harness.
If you are not comfortable performing this procedure yourself, you can take your vehicle to a qualified mechanic to have the OnStar system disabled.
Bypassing OnStar System
OnStar, a popular vehicle telematics system, provides a range of services including roadside assistance, anti-theft measures, and remote vehicle diagnostics. However, some individuals may prefer to disable this system for various reasons. The following instructions provide a step-by-step guide on how to bypass the OnStar system:
1. Access the Vehicle’s Settings Menu:
Locate the “Settings” or “Vehicle Information” menu on your vehicle’s infotainment system or instrument cluster.2. Navigate to the OnStar Section:
Within the settings menu, scroll to find the “OnStar” section or a similar option.3. Select the Disable Option:
Once you have accessed the OnStar section, locate the option to “Disable OnStar” or “Turn Off OnStar.”4. Confirm Your Choice:
The infotainment system will prompt you to confirm your decision to disable OnStar. Select the appropriate option.5. Wait for Confirmation:
The system will process your request and provide a confirmation message indicating that OnStar has been successfully disabled.6. Disable the OnStar Module (Optional):
If the above steps do not fully disable OnStar, you may need to physically disconnect the OnStar module. Locate the module (usually under the dashboard or behind the glovebox) and unplug it.7. Reset the Vehicle’s Battery:
To ensure that the system reset takes effect, disconnect the vehicle’s battery for a few minutes and then reconnect it.8. Contact OnStar (if necessary):
If you encounter any issues disabling OnStar, contact the OnStar customer support team for assistance.9. Subscription and Fee Considerations:
Disabling OnStar does not automatically cancel your subscription or monthly fees. To cancel your subscription, contact OnStar directly or check for options within your vehicle’s infotainment system.Service Fee Basic Plan $14.99/month Premier Plan $24.99/month Emergency Services Only Free Resetting OnStar Settings
If you’re experiencing issues with your OnStar system, resetting the settings may help resolve them. To reset the system:
- Press the OnStar button in your vehicle.
- When prompted, say “Reset system.”
- Confirm that you want to reset the system.
- The system will reset and restart automatically.
Additional Information
Here are some additional things to keep in mind when resetting your OnStar system:
- Resetting the system will not delete any of your personal data, such as your contacts or saved destinations.
- If you are still experiencing issues with your OnStar system after resetting it, you may need to contact OnStar customer support for further assistance.
Troubleshooting Tips
If you are unable to reset your OnStar system using the steps above, try the following troubleshooting tips:
- Make sure that the OnStar button in your vehicle is working properly.
- Try resetting the system while the vehicle is parked and the ignition is turned off.
- If you are still unable to reset the system, contact OnStar customer support for further assistance.
How To Disable Onstar
OnStar is a telematics system that provides a variety of services to drivers, including navigation, emergency assistance, and vehicle diagnostics. However, some drivers may want to disable OnStar for a variety of reasons, such as privacy concerns or to save money on the monthly subscription fee. Fortunately, it is relatively easy to disable OnStar by following a few simple steps.
Step 1: Press the OnStar button on your vehicle’s dashboard.
Step 2: When the OnStar advisor answers, tell them that you want to disable the service.
Step 3: The advisor will ask you to confirm your decision. Once you have confirmed, they will disable OnStar and provide you with a confirmation number.
That’s all there is to it! Once you have disabled OnStar, the service will no longer be active and you will no longer be charged the monthly subscription fee.
People Also Ask About How To Disable Onstar
How do I disable OnStar on my phone?
To disable OnStar on your phone, you will need to contact OnStar customer service at 1-888-466-7827. A customer service representative will be able to assist you with disabling the service on your account.
How much does it cost to disable OnStar?
There is no charge to disable OnStar. However, you may be charged a prorated fee for the remaining time on your current subscription.
What happens if I disable OnStar?
When you disable OnStar, the service will no longer be active and you will no longer be able to use any of the features provided by the system. This includes navigation, emergency assistance, and vehicle diagnostics.
Once you have completed either of these steps, your OnStar subscription will be canceled, and the remote services will be deactivated. You will no longer be able to use OnStar’s safety features, remote access, or other connected services.
| Service | Maintenance |
|---|---|
| OnStar Remote Services | Subscription-based; requires active account |
| Vehicle Diagnostics | Subscription-based or limited to certain vehicle models |
| Stolen Vehicle Assistance | Subscription-based; requires active OnStar account |
| Remote Key Fob Control | Subscription-based or limited to certain vehicle models |
Removing OnStar Button
To disable OnStar, you can remove the OnStar button from your vehicle. Here’s how:
