5 Ways to Disconnect a PS4 Controller From Your PS4

PS4 controller disconnected

Are you tired of the constant hassle of pairing and unpairing your PS4 controllers every time you switch between gaming sessions? Or, maybe you’ve encountered a pesky connectivity issue that leaves you scratching your head? Fear not! Disconnecting your PS4 controller from your PS4 console is a breeze, and we’re here to guide you through the process effortlessly. Whether you’re looking to switch controllers mid-game, resolve a connectivity glitch, or simply give your controller a well-deserved rest, follow our step-by-step guide and prepare to bid farewell to controller woes once and for all.

To initiate the disconnection process, begin by ensuring that your PS4 controller is powered on. Next, locate the small, circular PlayStation button in the center of the controller. Press and hold this button for approximately 5 seconds. As you hold down the button, you’ll notice the light bar around the touchpad begin to blink rapidly. This blinking light indicates that the controller is entering pairing mode. However, since our goal is to disconnect the controller, we’ll need to take an additional step. Continue holding down the PlayStation button until the light bar stops blinking and turns off completely. This signifies that the controller has successfully disconnected from your PS4 console.

Now that your PS4 controller is disconnected, you can either pair it with a different PS4 console or simply set it aside until you’re ready to use it again. If you’re facing any persistent connectivity issues, try restarting both the controller and the PS4 console. To restart the controller, insert a small, pointed object, such as a paperclip, into the reset hole located on the back of the controller. Press and hold the reset button for a few seconds until the light bar flashes once. To restart the PS4 console, press and hold the power button on the front of the console for approximately 7 seconds, until you hear two beeps. Once both the controller and the console have restarted, attempt to pair the controller again by following the steps outlined above. With these troubleshooting tips at your disposal, you can conquer any controller connectivity challenges and enjoy seamless gaming sessions without interruption.

Unplug the Controller

To physically disconnect your PS4 controller from the console, you can simply unplug the USB cable that connects the two devices. This will immediately sever the connection between the controller and the PS4, allowing you to use it with other devices or simply store it away.

Unplugging the Controller

Here are the detailed steps to unplug the PS4 controller:

Locate the USB cable that connects the controller to the PS4.
Gently grasp the USB connector on the controller end and pull it straight out of the port.
If the controller is connected to a PS4 Pro or PS4 Slim model, you can unplug it from the front USB ports.
If the controller is connected to an original PS4 model, you will need to unplug it from the USB ports on the back of the console.

Once the controller is unplugged, it will be completely disconnected from the PS4. You can now use it with other devices or store it away until you need it again.

Action	Description
Locate the USB cable	Find the cable that connects the controller to the PS4.
Unplug the USB connector	Gently pull the USB connector on the controller end straight out of the port.
Disconnect from PS4 Pro/Slim	Unplug the controller from the front USB ports on the PS4 Pro or PS4 Slim.
Disconnect from original PS4	Unplug the controller from the USB ports on the back of the original PS4.

Use the PlayStation Menu

To disconnect a PS4 controller using the PlayStation menu:

Turn on your PlayStation 4 using either the power button or the PS button on your paired controller.

Navigate to the Settings menu by pressing the up arrow on the D-pad or left analog stick, and selecting the gear icon.

Scroll down and select “Devices.”
Select “Bluetooth Devices.”
Highlight the controller you want to disconnect and press the Options button on your paired controller.
Select “Disconnect.”
The controller will now be disconnected from the PlayStation 4.

Check the Physical Connection

The first step in disconnecting your PS4 controller is to check the physical connection between the controller and the console. Make sure the controller is properly plugged into the USB port on the PS4. You should hear a click when the controller is securely connected. If the controller is not plugged in all the way, it will not be able to communicate with the PS4 and will not be able to be disconnected. Once the controller is properly connected, press the PS button on the controller to turn it on.

Using the PS Button

If the controller is connected but still not working, try using the PS button to reset the connection. Press and hold the PS button for about 5 seconds until the light on the back of the controller starts flashing white. Once the light starts flashing, release the PS button. The controller will now be in pairing mode and will be ready to be connected to the PS4. To connect the controller, press and hold the PS button again until the light on the back of the controller turns solid white. The controller will now be connected to the PS4 and will be ready to use.

Using the Reset Button

If you are still having trouble connecting the controller, you can try using the reset button. The reset button is located on the back of the controller, near the bottom. Use a small, pointed object, such as a paperclip, to press and hold the reset button for about 5 seconds. Once the reset button is pressed, the controller will be reset and will be ready to be connected to the PS4. To connect the controller, press and hold the PS button again until the light on the back of the controller turns solid white. The controller will now be connected to the PS4 and will be ready to use.

Reset the PS4

Resetting your PS4 will remove all of its saved data, including your game saves, settings, and accounts. This can be a helpful way to troubleshoot problems with your PS4, or to completely wipe it clean before selling it or giving it away.

To reset your PS4, follow these steps:

Turn off your PS4.
Unplug the power cord from the back of the PS4.
Wait 30 seconds.
Plug the power cord back into the PS4.
Turn on your PS4.
Select the “Initialize PS4” option from the menu.
Follow the on-screen instructions to complete the reset process.

Once your PS4 has been reset, all of your saved data will be gone. You will need to set up your PS4 again from scratch, and you will need to re-install any games or apps that you want to play.

Update the Controller Firmware

To improve the performance and functionality of your PS4 controller, it’s recommended to keep its firmware updated. Here’s a detailed guide on how to do it:

Check Current Firmware Version

Connect your controller to the PS4 via USB cable and go to [Settings] > [Devices] > [Controllers] > [Wireless Controller]. The current firmware version will be displayed under [Firmware Version].
Download the Update File

Visit the PlayStation Support website and search for the corresponding firmware update file for your controller model (e.g., “CUH-ZCT2U”). Download the file to a USB drive formatted in FAT32.
Create a PS4 Firmware Update Folder

Create a folder named “PS4UPDATE” (capitalization matters) on the root directory of your USB drive. Inside the folder, create a subfolder named “UPDATE” (also in all caps).
Copy the Firmware File

Copy the downloaded firmware file into the “UPDATE” subfolder. Ensure that the file name follows the format: “PS4UPDATE.PUP”.
Connect Controller and Install Update

Turn off your PS4. Connect your controller to the PS4 via USB cable and insert the USB drive with the firmware update file into the PS4’s USB port. Hold down the [SHARE] and [PS] buttons simultaneously while powering on the PS4. Release the buttons when the PS4 enters Safe Mode.

Using the controller, navigate to [Update System Software] > [Update from USB Storage Device]. Select the firmware update file and follow the on-screen instructions to install the update.

Once the update is complete, your controller’s firmware will be updated to the latest version.

Firmware File Name	Controller Model
PS4UPDATE.PUP	CUH-ZCT2U
PS4UPDATEV2.PUP	CUH-ZCT2U2
PS4UPDATEV3.PUP	CUH-ZCT2E

Remove the Controller from the PS4

To remove the controller from the PS4, follow these steps:

1. Turn off the PS4.

Press and hold the power button on the front of the PS4 for about 10 seconds, until the system turns off.

2. Unplug the controller from the PS4.

Locate the USB cable that is connected to the controller, and unplug it from the PS4.

3. Press and hold the PS button on the controller.

The PS button is located in the center of the controller. Press and hold it for about 10 seconds, until the light bar on the controller begins to blink.

4. Release the PS button.

Once the light bar begins to blink, release the PS button.

5. Plug the controller back into the PS4.

Locate the USB cable that you unplugged in step 2, and plug it back into the PS4.

6. Wait for the controller to reconnect.

The controller will automatically reconnect to the PS4. Once the light bar on the controller stops blinking and turns solid, the controller is reconnected.

Troubleshooting	Solution
The controller does not reconnect after following the steps above.	Try resetting the controller by pressing the reset button on the back of the controller. The reset button is a small, recessed button located next to the L2 button.
The controller is still not reconnecting.	Try using a different USB cable to connect the controller to the PS4.

Troubleshoot USB Connection Issues

If you’re having trouble connecting your PS4 controller to your PS4 console via USB, there are a few things you can try:

1. Check the USB Cable

Make sure that the USB cable you’re using is the one that came with your PS4 or is a certified PlayStation accessory. Third-party cables may not work reliably.

2. Try a Different USB Port

If your console has multiple USB ports, try connecting your controller to a different port. Some ports may not provide enough power or may be malfunctioning.

3. Clean the USB Ports

Over time, dust and debris can accumulate in the USB ports on your console and controller. Use a compressed air can to gently blow out any debris.

4. Reset the Controller

To reset your controller, insert a small object, such as a straightened paperclip, into the reset hole on the back of the controller. Hold the button down for 5 seconds until the controller lights blink.

5. Rebuild the PS4 Database

Rebuilding the PS4 database can resolve issues with corrupted data that may interfere with controller connectivity. To do this, turn off your PS4, then hold down the power button again until you hear two beeps. Release the button and connect your controller to the console via USB.

6. Update the PS4 System Software

Make sure your PS4 system software is up to date. Software updates can include fixes for controller connectivity issues.

7. Additional Troubleshooting Tips

If none of the above solutions resolve the issue, here are some additional troubleshooting tips:

Issue	Solution
Controller won’t turn on	Try charging the controller for at least 30 minutes with the USB cable connected to the PS4 console. If it still doesn’t turn on, replace the battery.
Controller disconnects randomly	Check the USB cable for damage or loose connections. Try using a different USB cable or port.
Controller has input lag	Make sure the controller is paired with the console via Bluetooth. To do this, turn on the console and the controller, then press the PS button on the controller. The controller should vibrate and the light bar should turn blue.

Use a Wired Connection

If you’re having trouble disconnecting your PS4 controller wirelessly, you can try using a wired connection instead. This is a more reliable method, as it doesn’t rely on Bluetooth. To do this, you’ll need a micro-USB cable.

1. Turn off your PS4.
2. Connect the micro-USB cable to the controller and to the PS4.
3. Turn on your PS4.
4. The controller should now be connected and ready to use.

Troubleshooting Wired Connection Issues

If you’re having trouble connecting your controller with a wired connection, try the following:

– Make sure that the micro-USB cable is securely connected to both the controller and the PS4.
– Try using a different micro-USB cable.
– Try resetting the controller by holding down the PS button for 10 seconds.
– If you’re still having trouble, contact PlayStation Support.

Disconnect the Wired Connection

To disconnect the wired connection, simply unplug the micro-USB cable from either the controller or the PS4.

Check the PS4 Settings

If you’re having trouble disconnecting your PS4 controller, try checking the PS4 settings. Here’s how:

1. Go to the Settings menu on your PS4.

You can access the Settings menu from the main PS4 menu.

2. Select “Devices” from the Settings menu.

This will open a list of all the devices that are connected to your PS4, including your controllers.

3. Select “Bluetooth Devices” from the Devices menu.

This will open a list of all the Bluetooth devices that are connected to your PS4, including your controllers.

4. Select the controller you want to disconnect from the list.

This will open a menu with options for the selected controller.

5. Select “Disconnect” from the menu.

Your controller will now be disconnected from your PS4.

6. If you want to reconnect the controller, simply press the PS button on the controller.

The controller will automatically reconnect to your PS4.

7. If you’re still having trouble disconnecting your controller, try resetting it.

To reset your controller, insert a small paperclip or a similar object into the reset hole on the back of the controller. Hold the reset button for about 5 seconds, until the light on the controller starts flashing.

8. Once the controller has been reset, try connecting it to your PS4 again.

The controller should now be connected to your PS4 and working properly.

9. If you’re still having problems, you may need to contact PlayStation Support.

PlayStation Support can be reached by phone, email, or chat. You can find their contact information on the PlayStation website.

Option	Description
Disconnect	Disconnects the controller from the PS4.
Forget Device	Removes the controller from the list of paired devices on the PS4.
Reset	Resets the controller to its factory settings.

How to Disconnect PS4 Controller from PS4

If you’re having trouble connecting your PS4 controller to your PS4 console, there are a few things you can try. Here are the steps on how to disconnect PS4 controller from PS4:

1. Check the controller’s battery

Make sure that the controller’s battery is charged. If the battery is low, the controller will not be able to connect to the console.

2. Reset the controller

To reset the controller, press and hold the PS button and the Share button at the same time for about 5 seconds. The controller will turn off and then back on. Once the controller is reset, try connecting it to the console again.

3. Update the controller’s firmware

To update the controller’s firmware, connect the controller to the console using a USB cable. Then, go to the Settings menu and select “System Software Update”. The console will check for available updates and install them.

4. Try a different USB cable

If you’re using a USB cable to connect the controller to the console, try using a different cable. Some cables may not be compatible with the PS4 controller.

5. Connect the controller to a different USB port

Try connecting the controller to a different USB port on the console. Some USB ports may not be able to provide enough power to the controller.

6. Restart the console

To restart the console, press and hold the power button on the front of the console for about 7 seconds. The console will turn off and then back on. Once the console has restarted, try connecting the controller again.

7. Initialize the PS4 console

Initializing the PS4 console will reset the console to its factory settings. This will erase all data on the console, so be sure to back up any important data before you proceed. To initialize the console, go to the Settings menu and select “Initialization”.

8. Contact PlayStation Support

If you’ve tried all of the above steps and you’re still having trouble connecting your PS4 controller to your PS4 console, you can contact PlayStation Support for help. Here is how to contact PlayStation Support:

PlayStation Support website

PlayStation Support Twitter account

PlayStation Support Facebook page

Method	Contact Information
Website	https://support.playstation.com/s/contact-support?language=en_US
Twitter	@AskPlayStation
Facebook	https://www.facebook.com/PlayStation/

How To Disconnect Ps4 Controller From Ps4

To disconnect a PS4 controller from a PS4, you can either use the controller’s own buttons or the console’s settings menu.

To disconnect a controller using the controller’s buttons, first press and hold the PS button in the center of the controller. This will open the Quick Menu. Then, use the D-pad to navigate to the “Sound/Devices” option and press the X button. Finally, select the “Disconnect Controller” option and press the X button again.

To disconnect a controller using the console’s settings menu, first go to the Settings menu from the PS4’s home screen. Then, select the “Devices” option and then the “Bluetooth Devices” option. Finally, select the controller you want to disconnect and press the X button.