10 Ways to Fix an iPhone Charger

iPhone charger

Your iPhone charger is one of the most important accessories you own. Without it, you wouldn’t be able to keep your phone charged and running. But what happens when your charger stops working? Don’t worry, there are a few things you can do to try and fix it yourself.

$title$

First, check the cable for any damage. If the cable is frayed or broken, it will need to be replaced. You can also try cleaning the charging port on your iPhone. Dirt and debris can build up in the port and prevent the charger from making a good connection. To clean the port, use a cotton swab dipped in rubbing alcohol. Insert the cotton swab into the port and gently twist it around. Be careful not to damage the pins inside the port.

If you’ve tried all of the above and your charger still isn’t working, it may be time to replace it. You can purchase a new charger from Apple or from a third-party retailer. When choosing a new charger, be sure to choose one that is compatible with your iPhone model. Using an incompatible charger can damage your phone.

Troubleshooting Common iPhone Charger Issues

Check the Cable for Damage

Start by examining the iPhone charger cable for any visible signs of damage, such as cuts, kinks, or fraying. Pay close attention to the ends of the cable, where it connects to the phone and the power adapter. If you notice any damage, it’s likely the source of your charging problem.

If the cable appears undamaged, try bending it slightly at different points along its length. If you feel any resistance or see the cable becoming distorted, there may be an internal break in the wires. In this case, the cable will need to be replaced.

Check the ends of the cable for corrosion or dirt, which can interfere with the charging process. Use a cotton swab dipped in rubbing alcohol to gently clean the contacts on both ends of the cable. Allow them to dry completely before attempting to charge your phone again.

Try a Different Power Adapter

The power adapter that comes with your iPhone is designed to provide the correct voltage and amperage for charging. However, if you’re using a different charger or a charger that is not Apple-certified, it may not be compatible with your phone.

Try using a different power adapter that is known to be working properly. If your phone starts charging with the new adapter, the original adapter may be faulty and need to be replaced.

Restart Your iPhone

Sometimes, a simple restart can resolve charging issues. Restart your iPhone by holding down the Power button and the Volume Down button simultaneously. Keep holding the buttons until you see the Apple logo appear on the screen.

Inspecting the Physical Connection

Begin your troubleshooting by examining the physical connection between your iPhone charger and the device. Here are some specific areas you should inspect:

1. Charging Port

First, check the charging port on your iPhone for any visible damage. Look for bent or broken pins, dirt or debris, or any other abnormalities. If you find any dirt or debris, gently use a soft brush or toothpick to remove it. Avoid using sharp objects as they could damage the port.

2. USB Cable

Next, inspect the USB cable for any signs of wear or tear. Look for cracks, cuts, or fraying in the cable. Also, check the connectors on both ends of the cable for any damage or corrosion. If the cable appears damaged, try using a different one to rule out any cable-related issues.

Common Cable Issues	How to Check
Cracks or cuts	Bend or flex the cable to look for cracks or cuts in the insulation.
Fraying	Inspect the outer layer of the cable for any loose or frayed wires.
Damaged connectors	Check the connectors for any bent or broken pins or corrosion on the surfaces.

Restarting Your iPhone

Restarting your iPhone can resolve various issues, including charging problems. Here’s how to restart your iPhone:

**For iPhone 8 and later:** Press and hold the Volume Up button and release it. Then, press and hold the Volume Down button and release it. Finally, press and hold the Side button until you see the Apple logo.
**For iPhone 7 and iPhone 7 Plus:** Press and hold both the Volume Down button and the Sleep/Wake button simultaneously until you see the Apple logo.
**For iPhone 6s and earlier:** Press and hold the Sleep/Wake button on the top or side of the device until you see the Apple logo.

Troubleshooting

If restarting your iPhone doesn’t resolve the charging issue, consider the following troubleshooting steps:

Issue	Possible Solution
Dirty or damaged charging port	Use a soft brush or cotton swab to gently clean the charging port. Avoid using sharp or metal objects.
Loose or damaged charging cable	Inspect the cable for cracks or breaks. Try using a different cable to rule out cable issues.
Faulty adapter	Try using a different adapter or plugging the charger directly into a power outlet without using an adapter.
Software glitch	Update your iPhone to the latest iOS version.
Hardware issue	If all else fails, your iPhone may have a hardware issue. Contact Apple Support or an authorized repair service.

Checking for Firmware Updates

If you’re still experiencing charging issues after cleaning the port, you might want to check for firmware updates. Outdated firmware can sometimes cause problems with charging, as they might not be compatible with the latest iOS versions or charging accessories. Here’s how to check for firmware updates:

1. Connect to Wi-Fi

Your iPhone needs to be connected to Wi-Fi to check for updates.

2. Back up your device

Before updating, it’s always a good idea to back up your iPhone in case anything goes wrong. You can back up to iCloud or your computer using iTunes.

3. Go to Settings

Open the Settings app on your iPhone.

4. Tap General

Scroll down and tap on “General”.

5. Tap Software Update

This will take you to the software update screen.

6. Check for updates

If there’s an update available, you’ll see a button that says “Download and Install”. Tap on it to start the update process.

7. Wait for the update to finish

This could take a few minutes. Once the update is finished, your iPhone will restart automatically.

Resetting Your iPhone’s Network Settings

If you’ve tried all the previous troubleshooting steps and your iPhone charger is still not working, resetting your iPhone’s network settings may resolve the issue. This process will erase all saved Wi-Fi networks, passwords, and VPN settings. Here’s how to do it:

Open the Settings app on your iPhone.
Tap on “General.”
Scroll down and tap on “Reset.”
Tap on “Reset Network Settings.”
Enter your iPhone’s passcode if prompted.
Tap on “Reset Network Settings” again to confirm.

Once your iPhone’s network settings have been reset, try connecting your charger again. If it’s still not working, you may need to replace the charger or contact Apple Support for further assistance.

Resetting Network Settings
Step	Action
1	Open the Settings app
2	Tap on “General”
3	Scroll down and tap on “Reset”
4	Tap on “Reset Network Settings”
5	Enter your iPhone’s passcode
6	Tap on “Reset Network Settings” to confirm

How To Fix An iPhone Charger

If your iPhone charger is not working properly, there are a few things you can do to try and fix it. First, check the cable for any damage. If the cable is frayed or damaged, it will need to be replaced.

If the cable is not damaged, try cleaning the connector on both the charger and the iPhone. You can use a cotton swab dipped in rubbing alcohol to clean the connectors.

If cleaning the connectors does not work, you can try resetting the iPhone. To reset the iPhone, press and hold the power button and the home button at the same time. Hold the buttons until the Apple logo appears on the screen.

If resetting the iPhone does not work, you may need to replace the charger. You can purchase a new iPhone charger from Apple or from a third-party retailer.