Whether you’re trying to go blonde, brunette, or even just a different shade of black, getting rid of black hair color can be a challenge. The dark pigments in black hair can be very difficult to remove, and if you’re not careful, you could end up damaging your hair in the process. However, there are a few things you can do to make the process easier and less damaging.
One of the most important things to keep in mind when removing black hair color is to be patient. It’s not going to happen overnight, and you may need to repeat the process several times to get the desired results. However, if you’re patient and careful, you can eventually get rid of black hair color without damaging your hair.
Another important thing to keep in mind is to use the right products. There are a number of different products available to help remove black hair color, and it’s important to choose one that is specifically designed for your hair type. If you have fine or damaged hair, you’ll need to use a gentler product than if you have thick or healthy hair. Additionally, you should always follow the instructions on the product label carefully.
Chemical Stripping with Bleach
Chemical stripping is a harsh but effective method of removing black hair color. It involves using a chemical stripper, which is typically a combination of bleach and ammonia, to break down the dye molecules in the hair. This process can be damaging to the hair, so it is important to follow the instructions carefully and to use a deep conditioner afterwards to minimize damage.
Step-by-Step Instructions
- Gather your supplies. You will need a chemical stripper, a developer, a mixing bowl, a brush, gloves, and a deep conditioner.
- Prepare the stripper. Mix the stripper and developer according to the manufacturer’s instructions. Be sure to wear gloves to protect your hands.
- Apply the stripper. Using a brush, apply the stripper to your hair, starting at the roots. Work your way through the hair until it is evenly coated.
- Process the stripper. The processing time will vary depending on the manufacturer’s instructions. Typically, the stripper will need to sit for 20-30 minutes.
- Rinse the stripper. Once the processing time is complete, rinse the stripper out of your hair with warm water. Be sure to rinse thoroughly to remove all of the stripper.
- Condition your hair. After rinsing the stripper, apply a deep conditioner to your hair. This will help to minimize damage and restore moisture to the hair.
Tips
- Use a low-volume developer (10-20 volume) to minimize damage to your hair.
- Do not leave the stripper on your hair for longer than the recommended time, as this can cause damage.
- Be sure to rinse the stripper out of your hair thoroughly to prevent skin irritation.
- Follow up with a deep conditioner to restore moisture to your hair.
Warnings
- Chemical stripping can be damaging to your hair. Do not use this method if your hair is already damaged or if you have a sensitive scalp.
- Be sure to wear gloves when using a chemical stripper to protect your hands.
- Do not use a chemical stripper more than once every six months, as this can cause severe damage to your hair.
Natural Removal with Vitamin C
Vitamin C can effectively strip away hair color by breaking down the artificial pigments. Here’s how you can use it:
Ingredients:
| Ingredient | Quantity |
|---|---|
| Vitamin C tablets | 10-20 |
| Warm water | 1 cup |
| Shampoo | 1 tablespoon |
Instructions:
- Crush the vitamin C tablets into a fine powder.
- Mix the powder with warm water until it forms a paste.
- Apply the paste to your hair, focusing on the areas with the darkest black color. Use a brush or your fingers to distribute it evenly.
- Cover your hair with a shower cap and let the paste sit for 30-60 minutes. The longer you leave it on, the more effective it will be.
- Rinse your hair thoroughly with water.
- Shampoo your hair with a clarifying shampoo to remove any remaining color or residue.
- Condition your hair to restore its moisture and shine.
Gradual Fading with Dish Soap
Dish soap, a common household cleaner, can gradually strip away black hair color over time. However, it’s important to use a mild dish soap that is gentle on your hair. Harsh dish soaps can dry out your hair, leaving it brittle and prone to breakage.
To use dish soap to fade black hair color, simply mix a small amount of soap with water in a bowl. The amount of soap you use will depend on the length and thickness of your hair. Apply the mixture to your hair and let it sit for 10-15 minutes. Rinse your hair thoroughly with warm water. Repeat this process several times a week until your hair has reached its desired color.
Here are the step-by-step instructions for gradual fading with dish soap:
| Step | Instructions |
|---|---|
| 1 | Mix a small amount of mild dish soap with water in a bowl. |
| 2 | Apply the mixture to your hair and massage it in. |
| 3 | Let the mixture sit for 10-15 minutes. |
| 4 | Rinse your hair thoroughly with warm water. |
| 5 | Repeat this process several times a week until your hair has reached its desired color. |
Professional Salon Treatment
If you’re looking for a more permanent solution to removing black hair color, a professional salon treatment is your best option. Salon treatments typically involve using a chemical stripper to break down the pigment in the hair, which can then be washed out. This is a more effective method than home remedies, but it can also be more expensive and damaging to the hair.
There are two main types of chemical strippers used in salons: color removers and bleach. Color removers are less damaging than bleach, but they may not be as effective at removing all of the black pigment. Bleach, on the other hand, is more effective at removing black hair color, but it can also be more damaging to the hair.
The type of chemical stripper that is best for you will depend on your hair type and the amount of black pigment that you want to remove.
The process of removing black hair color in a salon typically takes several hours, and it may require multiple treatments to achieve the desired results. It is also important to note that chemical strippers can cause the hair to become dry and brittle, so it is important to use a deep conditioner after the treatment to help restore moisture to the hair.
Cost of Professional Salon Treatment
The cost of a professional salon treatment to remove black hair color will vary depending on the length and thickness of your hair, the type of chemical stripper used, and the number of treatments required. However, you can expect to pay anywhere from $100 to $500 for the treatment.
| Treatment | Cost |
|---|---|
| Color remover | $100-$200 |
| Bleach | $200-$500 |
Risks of Professional Salon Treatment
Chemical strippers can cause the hair to become dry, brittle, and damaged. In some cases, the hair may even break off. It is important to discuss the risks with your stylist before undergoing any chemical treatment, and to follow their instructions carefully to minimize the risk of damage.
Oxidizing Agents and Developer
Oxidizing agents, like hydrogen peroxide, and developers, like ammonia, work together to lighten hair color. Hydrogen peroxide breaks down the melanin pigments in the hair, while ammonia opens up the hair cuticle to allow the hydrogen peroxide to penetrate. The higher the volume of the developer, the more hydrogen peroxide it contains and the lighter the hair will become.
The process of removing black hair color with oxidizing agents and developer is as follows:
- Apply a pre-bleach treatment to the hair to help protect it from damage.
- Mix the oxidizing agent and developer according to the manufacturer’s instructions.
- Apply the bleach mixture to the hair, starting at the roots and working your way to the ends.
- Leave the bleach on for the amount of time specified in the instructions.
- Rinse the hair thoroughly with cool water.
- Apply a toner to the hair to help even out the color and remove any brassy tones.
- Condition the hair to help repair any damage caused by the bleaching process.
Developer Strength
The strength of the developer used will determine how much the hair will be lightened. The most common developer strengths are 10, 20, 30, and 40 volume. The higher the volume, the stronger the developer and the more the hair will be lightened.
| Developer Strength | Amount of Lift |
|---|---|
| 10 volume | 1-2 levels |
| 20 volume | 2-3 levels |
| 30 volume | 3-4 levels |
| 40 volume | 4-5 levels |
Diluting Color with Lighter Dye
This technique involves mixing a permanent or semi-permanent lighter hair dye with your current black hair. The lighter dye will gradually lift the black color, diluting it over time. This process can take multiple applications and requires patience and consistency.
Choosing the Right Dye
Select a permanent or semi-permanent hair dye that is at least two shades lighter than your current black hair. It’s recommended to use a dye with a base shade of blonde, such as golden blonde or honey blonde. Avoid using color depositing dyes or toning shampoos, as they will not effectively remove black color.
Applying the Dye
Follow the manufacturer’s instructions carefully when applying the dye. Section your hair and apply the dye evenly from roots to ends. Leave the dye on for the recommended processing time, then rinse thoroughly.
Repeating the Process
The diluting process may require multiple applications to achieve the desired result. After each application, allow your hair to rest for a few days before reapplying. This will prevent damage and excessive breakage.
Maintenance
Once you have achieved your desired hair color, it’s important to maintain it with regular touch-ups and color-protecting products. Use color-safe shampoos and conditioners, and avoid over-washing or exposing your hair to harsh heat styling tools.
Tips for Success
| Tip | Description |
|---|---|
| Start with a small section | Test the dye on a small, inconspicuous area of hair before applying it to the entire head. |
| Use a lower developer | A 10-volume developer or lower will lift the color more gradually, reducing the risk of brassiness. |
| Condition regularly | Dyeing can dry out hair, so use a deep conditioner or hair mask regularly to keep it healthy. |
Cleansing with Baking Soda
Baking soda is a natural alkaline that can help to remove black hair color from your hair. To use this method, mix equal parts baking soda and water to form a paste. Apply the paste to your hair and let it sit for 30 minutes to an hour. Then, rinse your hair thoroughly with warm water.
Baking soda can be drying, so it’s important to condition your hair after using this method.
Here are some additional tips for using baking soda to remove black hair color:
- Don’t use baking soda more than once a week, as it can damage your hair.
- If you have dry or damaged hair, you may want to add a little bit of olive oil to the baking soda paste.
- Baking soda can also be used to lighten natural hair color.
Here is a table summarizing the steps for using baking soda to remove black hair color:
| Step | Instructions |
|---|---|
| 1 | Mix equal parts baking soda and water to form a paste. |
| 2 | Apply the paste to your hair and let it sit for 30 minutes to an hour. |
| 3 | Rinse your hair thoroughly with warm water. |
| 4 | Condition your hair. |
Avoiding Common Pitfalls
1. Using Harsh Chemicals
Bleach is a powerful chemical that can damage your hair if it’s not used correctly. Always follow the instructions on the package and avoid using bleach on your hair more than once per month.
2. Not Sectioning Your Hair
When you’re bleaching your hair, it’s important to section it into small, manageable pieces. This will help you to avoid missing any spots and ensure that your hair is evenly lightened.
3. Overlapping Your Bleaching Applications
When you’re applying bleach, avoid overlapping your strokes. This can cause your hair to become damaged and break off.
4. Leaving Bleach On Your Hair for Too Long
The longer you leave bleach on your hair, the more damage it will cause. Always follow the instructions on the package and avoid leaving bleach on your hair for longer than 30 minutes.
5. Not Rinsing Your Hair Thoroughly
After you’ve bleached your hair, it’s important to rinse it thoroughly with water. This will help to remove any residual bleach and prevent your hair from becoming damaged.
6. Using Too Much Heat
Heat can damage your hair, so it’s important to avoid using too much heat when you’re bleaching your hair. Let your hair air dry whenever possible and avoid using heat styling tools on a high setting.
7. Not Protecting Your Scalp
When you’re bleaching your hair, it’s important to protect your scalp from the chemicals. Apply a barrier cream or petroleum jelly to your scalp before you start bleaching and avoid getting any bleach on your skin.
8. Not Following Up with a Hair Mask
After you’ve bleached your hair, it’s important to follow up with a hair mask. This will help to condition your hair and repair any damage that may have been caused by the bleaching process.
9. Not Getting Regular Trims
Bleached hair is more prone to breakage, so it’s important to get regular trims. This will help to remove any split ends and keep your hair looking healthy.
10. Not Consulting with a Professional
If you’re not sure how to bleach your hair safely, it’s always best to consult with a professional. They can help you to choose the right products and techniques for your hair type and ensure that your hair is bleached safely and effectively.
| Chemical | Purpose | Hazards |
|---|---|---|
| Bleach | Lightens hair | Can damage hair and cause breakage |
| Ammonia | Opens up the hair cuticle | Can cause irritation and allergic reactions |
| Peroxide | Bleaches the hair | Can cause hair to become dry and brittle |
How To Get Black Hair Color Out Of Your Hair
Removing black hair color from your hair can be a challenge, but it is possible with the right products and techniques. Here are a few methods you can try:
- Use a color remover. Color removers are products that are specifically designed to remove hair color, including black. They can be found at most beauty supply stores. Follow the instructions on the package carefully.
- Use a clarifying shampoo. Clarifying shampoos are designed to remove product buildup and dirt from your hair. They can also help to fade hair color. Use a clarifying shampoo once a week to help remove black hair color.
- Use a vinegar rinse. Vinegar is a natural acid that can help to remove hair color. Mix equal parts vinegar and water in a spray bottle. Spray the mixture onto your hair and let it sit for 15 minutes. Rinse your hair with water and shampoo as usual.
If you are not able to remove the black hair color yourself, you can consult a professional hair stylist. They will be able to help you remove the color safely and effectively.
People Also Ask
How long does it take to get black hair color out of hair?
The amount of time it takes to get black hair color out of your hair will vary depending on the method you use and the darkness of your hair. If you use a color remover, it will typically take several applications to completely remove the black color. If you use a clarifying shampoo or a vinegar rinse, it may take several weeks to see results.
Can I use bleach to get black hair color out of my hair?
Bleach is a powerful chemical that can damage your hair. It is not recommended to use bleach to remove black hair color. If you do decide to use bleach, be sure to follow the instructions on the package carefully and do not leave it on your hair for too long.
Will black hair color damage my hair?
Any type of hair color can damage your hair, including black. Black hair color is particularly damaging because it contains a lot of pigment. If you are concerned about damaging your hair, you should talk to a professional hair stylist before coloring your hair black.
