Are you stuck in Safe Mode on your PlayStation 4 and can’t seem to get out? Safe Mode is a special diagnostic mode that allows you to troubleshoot and fix problems with your PS4. However, if you’re not careful, you could accidentally reset your PS4 to factory settings, losing all your data. That’s why it’s important to follow the steps below carefully to get out of Safe Mode without losing any data.
The first thing you need to do is restart your PS4 in Safe Mode. To do this, turn off your PS4 completely. Then, press and hold the power button until you hear two beeps. The first beep will sound after about seven seconds, and the second beep will sound about a second later. Release the power button after the second beep. Your PS4 will now start up in Safe Mode. Once your PS4 is in Safe Mode, you will see a menu of options. Use the directional buttons on your controller to navigate the menu and select the “Restart PS4” option. Your PS4 will now restart normally, and you should be able to use it as usual.
If you’re still having trouble getting out of Safe Mode, you may need to perform a factory reset. This will erase all data on your PS4, so be sure to back up your data before proceeding. To perform a factory reset, select the “Initialize PS4” option from the Safe Mode menu. Follow the on-screen instructions to complete the factory reset. Once the factory reset is complete, your PS4 will restart normally, and you will be able to set it up as a new console.
Disabling Safe Mode Automatically
If your PlayStation 4 entered Safe Mode but you’d prefer to avoid the manual process of disabling it, there’s an automated method you can try. Here are the steps:
- Restart your PS4 in Safe Mode as usual by holding down the power button until you hear two beeps.
- Once in Safe Mode, select the “Restart PS4” option using the directional buttons on your controller.
- Your PS4 will now attempt to restart normally. If successful, Safe Mode will be disabled automatically.
If, however, your PS4 encounters any issues during the restart process and re-enters Safe Mode, you may need to proceed with the manual disabling method described in the following section.
Here’s a table summarizing the steps:
| Step | Action |
|---|---|
| 1 | Restart your PS4 in Safe Mode. |
| 2 | Select “Restart PS4” in Safe Mode. |
| 3 | Your PS4 will restart normally, disabling Safe Mode. |
Restarting the System from Settings
1) Navigate to the Settings menu.
You can do this by pressing the PlayStation button on your controller and selecting Settings.
2) Select Restart PS4.
This will restart your PS4 in normal mode. If you see the message “Safe Mode Update Available,” select Update PS4 Software and then follow the on-screen instructions to update your PS4. Once the update is complete, your PS4 will restart in normal mode.
3) Select Restart.
Your PS4 will now restart in normal mode. If you see the message “Safe Mode Update Available,” select Update PS4 Software and then follow the on-screen instructions to update your PS4. Once the update is complete, your PS4 will restart in normal mode.
If you are unable to restart your PS4 from Settings, you can try the following:
- Unplug your PS4 from power and then plug it back in.
- Try using a different HDMI cable.
- Contact PlayStation Support for assistance.
Rebuilding the Database
The PS4’s database contains information about all of the games and applications installed on your console. When you rebuild the database, the PS4 will scan your storage devices and create a new database.
This can take several hours, and you will not be able to use your PS4 during this time. However, rebuilding the database can help to resolve a variety of issues, including:
When to Rebuild the Database
* The PS4 is taking a long time to start up or load games.
* The PS4 is freezing or crashing frequently.
* You are seeing errors when you try to play games or use applications.
* You have recently updated the PS4’s system software.
How to Rebuild the Database
1. Turn off your PS4.
2. Press and hold the power button until you hear two beeps.
3. Release the power button after the second beep, and then hold down the following buttons:
– Share button
– PS button
– Option button
4. Keep holding the buttons until the PS4 starts up in Safe Mode.
5. Select option 5, “Rebuild Database.”
6. Select “OK” to confirm.
7. The PS4 will begin rebuilding the database. This process can take several hours, and you will not be able to use your PS4 during this time.
8. Once the database has been rebuilt, your PS4 will restart automatically. You will then be able to use your PS4 as normal.
Resetting Your PlayStation 4 to Factory Defaults
Resetting your PlayStation 4 to factory defaults will erase all data on the console, including games, apps, and user data. This is a drastic measure, but may be necessary if the console is experiencing serious problems, such as freezing or crashing. If you have any important data on your PS4, be sure to back it up before proceeding with a factory reset.
To reset your PS4 to factory defaults, follow these steps:
- Turn off your PS4.
- Unplug the PS4’s power cord from the wall outlet.
- Wait for 30 seconds.
- Plug the PS4’s power cord back into the wall outlet.
- Turn on your PS4.
- The PS4 will start in Safe Mode.
- Select the “Initialize PS4 (Reinstall System Software)” option.
- Select the “Full” initialization option.
- Follow the on-screen instructions to complete the factory reset.
Things to Keep in Mind Before Resetting Your PS4
Before resetting your PS4 to factory defaults, it is important to keep the following things in mind:
- All data on the console will be erased, including games, apps, and user data.
- Any trophies you have earned will be lost.
- You will need to re-download and install all of your games and apps after the factory reset.
- You will need to re-create your user account and settings after the factory reset.
Backing Up Your PS4 Data
If you have any important data on your PS4, such as saved games, screenshots, or videos, you should back it up before resetting the console to factory defaults. You can back up your data to a USB drive, an external hard drive, or to the PlayStation Network.
| Backup Method | Instructions |
|---|---|
| USB Drive | Connect a USB drive to your PS4. Go to Settings > System > Backup and Restore > Back Up to USB Storage Device. Select the data you want to back up and click the “Back Up” button. |
| External Hard Drive | Connect an external hard drive to your PS4. Go to Settings > System > Backup and Restore > Back Up to External Hard Drive. Select the data you want to back up and click the “Back Up” button. |
| PlayStation Network | Go to Settings > System > Backup and Restore > Back Up to Online Storage. Select the data you want to back up and click the “Back Up” button. |
Uninstalling and Reinstalling System Software
If you’ve tried all the other methods and your PS4 is still stuck in Safe Mode, you may need to uninstall and reinstall the system software. This will wipe all data from your PS4, so make sure you back up any important files before proceeding.
Step 1: Prepare a USB Drive
- Format a USB drive (FAT32) with a minimum capacity of 500MB.
- Create a folder named PS4 on the USB drive.
- Inside the PS4 folder, create another folder named UPDATE.
- Download the latest PS4 system software from the PlayStation website.
Step 2: Copy the Update File to the USB Drive
- Extract the downloaded system software update file (.PUP) and copy it to the UPDATE folder on the USB drive.
Step 3: Boot Your PS4 in Safe Mode
- Turn off your PS4 completely.
- Press and hold the power button until you hear two beeps, then release it.
- Connect the USB drive with the update file to your PS4.
Step 4: Select “Initialize PS4 (Reinstall System Software)”
- Use your controller to select Initialize PS4 (Reinstall System Software).
- Follow the on-screen instructions to complete the initialization process.
Step 5: Restore Data from Backup
- Once the system software reinstallation is complete, you can restore your saved data from the backup you made earlier.
- Connect your backup storage device to your PS4 and follow the instructions to restore your data.
| Step | Description |
|---|---|
| 1 | Prepare a USB drive with a minimum capacity of 500MB and format it to FAT32. |
| 2 | Create a folder named **PS4** on the USB drive and a subfolder named **UPDATE** within the **PS4** folder. |
| 3 | Download the latest PS4 system software update file (.PUP) from the PlayStation website. |
| 4 | Extract the downloaded update file and copy it to the **UPDATE** folder on the USB drive. |
| 5 | Boot your PS4 in Safe Mode by pressing and holding the power button until you hear two beeps, then connect the USB drive with the update file. |
Updating the System Software
You can update your PlayStation 4 software in Safe Mode to fix system issues or access the latest features.
- Power down your console.
- Press and hold the power button.
- Release the button after you hear two beeps.
- Connect your controller with a USB cable and press the PS button.
The PlayStation will start in Safe Mode.
- Select "Update System Software."
- Select "Update via Internet" or "Update via USB Drive."
If you choose to update via the internet, your PlayStation will automatically download and install the latest software version.
If you choose to update via USB drive, you will need to have the latest software update file downloaded on a USB flash drive. Insert the USB drive into your PlayStation and follow the on-screen instructions to install the update.
Once the update is complete, your PlayStation will restart in normal mode.
Using Safe Mode to Troubleshoot Hardware Issues
Unplug all Peripherals
If you are experiencing recurring issues in Safe Mode, disconnect all peripherals, such as external hard drives, controllers, and VR headsets, to eliminate any potential hardware conflicts.
Reset CMOS Battery
The CMOS (Complementary Metal Oxide Semiconductor) battery maintains date and time settings when the PlayStation 4 is powered off. Occasionally, resetting the CMOS battery can resolve persistent Safe Mode issues.
Check Hard Drive
Navigate to [Settings] > [System] > [Storage] > [System Storage] and inspect the health status of your hard drive. If there are any indications of data corruption or impending failure, replace the hard drive with a new one.
Reseat Internal Components
Carefully disassemble your PlayStation 4 and reseat the internal components, including the motherboard, power supply, optical drive, and hard drive. Ensure all connections are secure and free of any debris.
Check Power Cable
Inspect the power cable and ensure it is securely connected to the PlayStation 4 and a reliable power source. If you have access to a spare power cable, try replacing it to eliminate any potential electrical issues.
Try a Different Monitor or HDMI Cable
If you are experiencing display issues in Safe Mode, connect your PlayStation 4 to a different monitor or television using a different HDMI cable. This will help determine if the issue lies with the display hardware or the console itself.
Consider Professional Repair
If none of the above troubleshooting steps resolve your Safe Mode issues, it is recommended to seek professional repair assistance from a qualified electronics technician or the PlayStation Support team.
Contacting PlayStation Support if Safe Mode Doesn’t Resolve the Problem
If you’ve tried all the steps in Safe Mode but still can’t get your PlayStation 4 to work properly, you may need to contact PlayStation Support. Here are the steps on how to do it:
- Go to the PlayStation Support website.
- Select your country or region.
- Click on “Contact Us”.
- Select “PlayStation 4”.
- Select the topic that best describes your problem.
- Fill out the form with your contact information and a brief description of your problem.
- Click on “Submit”.
A PlayStation Support representative will contact you as soon as possible to help you resolve your issue. They may ask you to provide additional information, such as your PlayStation 4’s serial number or a video of the problem. Be sure to have this information ready so that the representative can help you as quickly as possible.
| Additional Tips for Contacting PlayStation Support |
|---|
|
|
Preventing Safe Mode from Activating Unnecessarily
9. **Regularly clean and maintain your PS4:** Dust and debris can accumulate over time and interfere with the proper functioning of your console. Regularly cleaning the vents, fan, and other components can help prevent overheating and other issues that can trigger Safe Mode.
To clean your PS4, follow these steps:
| Component | Cleaning Method |
|---|---|
| Vents | Use a soft brush or vacuum cleaner to remove dust from the vents on the sides and back of the console. |
| Fan | Use a canned air duster to blow out dust from the fan vent on the back of the console. |
| Hard drive and optical drive | Use a cotton swab or microfiber cloth to gently wipe down the exterior of the hard drive and optical drive. |
| External components | Clean any external components, such as cables, controllers, and charging stations, with a damp cloth. |
Understanding the Limitations of Safe Mode
Safe Mode on PlayStation 4 is a diagnostic and recovery mode that provides limited functionality to troubleshoot and resolve system issues. However, it has certain limitations that users should be aware of:
- No Network Access: Safe Mode disables network connectivity, so you cannot connect to the PlayStation Network or access online features.
- Limited Functionality: Safe Mode only offers a bare-bones interface with a limited set of options, primarily focused on troubleshooting and repair.
- Data Loss Risk: Certain actions performed in Safe Mode, such as initializing the PS4, may result in data loss. Always back up your important data before entering Safe Mode.
- Time-Consuming: Troubleshooting and resolving issues in Safe Mode can be time-consuming, especially if it involves rebuilding databases or reinstalling the PS4 software.
- Not a Guaranteed Fix: Safe Mode does not guarantee that all issues will be resolved. In some cases, hardware damage or other factors may require professional repair.
- Limited Controller Support: Safe Mode is only compatible with wired DualShock 4 controllers. Wireless controllers will not be recognized.
- No Region Switching: Safe Mode does not allow you to change the console’s region, which is locked to the region it was purchased in.
- Not a Cheat Mode: Safe Mode is solely intended for troubleshooting purposes and does not provide access to any cheats or hidden features.
- Slow Boot Time: Booting into Safe Mode can take longer than normal, as the PS4 performs additional diagnostics and repairs.
- No Game Launch: Safe Mode does not allow you to launch games or access your game library. It is strictly a troubleshooting environment.
How To Get Out Of Safe Mode Playstation 4
Safe Mode is a special mode on the PlayStation 4 that can be used to troubleshoot and fix problems with the console. It can be used to rebuild the database, reset the console to factory settings, or to update the system software. To get out of Safe Mode, simply restart the console by holding down the power button on the front of the console until it beeps twice. The console will then restart in normal mode.
If you are having trouble getting out of Safe Mode, you can try the following steps:
- Make sure that the console is properly connected to a power outlet and that the power cord is not damaged.
- Try restarting the console in Safe Mode by holding down the power button on the front of the console until it beeps twice.
- If you are unable to get out of Safe Mode, you may need to contact PlayStation Support for assistance.
People Also Ask About How To Get Out Of Safe Mode Playstation 4
How do I know if my PS4 is in Safe Mode?
When your PS4 is in Safe Mode, the screen will display a black background with white text. The text will include a list of options, including “Restart System”, “Update System Software”, and “Rebuild Database”.
How do I get out of Safe Mode if my PS4 controller is not working?
If your PS4 controller is not working, you can use the power button on the front of the console to restart it. To do this, hold down the power button until the console beeps twice. The console will then restart in normal mode.
How do I fix a PS4 that is stuck in Safe Mode?
If your PS4 is stuck in Safe Mode, you may need to contact PlayStation Support for assistance. There are a few things that can cause a PS4 to get stuck in Safe Mode, including a corrupted system software update or a hardware problem.
