Swingline staplers are known for their durability and reliability, but even the toughest stapler can jam from time to time. If you find yourself with a jammed Swingline stapler, don’t despair. It is possible to open it up and clear the jam without damaging the stapler. However, it is important to be careful when opening a Swingline stapler, as the springs inside can be quite powerful. Therefore, it is important to wear safety glasses and take precautions to avoid injury. Additionally, before you open up your Swingline stapler, it is important to make sure that it is unplugged from any power source.
Once you have taken the necessary safety precautions, you can begin the process of opening your Swingline stapler. First, locate the small screw on the bottom of the stapler and remove it. Next, use a flathead screwdriver to pry open the two halves of the stapler. Once the stapler is open, you will be able to see the internal mechanism. Locate the jammed staple and carefully remove it. Once the staple has been removed, you can reassemble the stapler and begin using it again.
Identifying the Safety Latch
Swingline heavy-duty staplers come equipped with a safety latch to prevent accidental stapling. The safety latch is typically located on the base of the stapler, directly below the stapling mechanism. When the latch is engaged, the stapler will not be able to fire.
Locating the Safety Latch
To locate the safety latch on your Swingline heavy-duty stapler, follow these steps:
- Place the stapler upside down on a flat surface.
- Look at the bottom of the stapler. You should see a small, plastic lever or button labeled “Safety” or “Lock”.
- This lever or button is the safety latch.
Engaging the Safety Latch
To engage the safety latch, simply slide the lever or button towards the “On” or “Locked” position. This will prevent the stapler from firing.
Disengaging the Safety Latch
To disengage the safety latch, slide the lever or button towards the “Off” or “Unlocked” position. The stapler will now be able to fire.
Here is a table summarizing the information about the safety latch on Swingline heavy-duty staplers:
| Safety Latch Location | Safety Latch Appearance | Safety Latch Function |
|---|---|---|
| Base of the stapler, below the stapling mechanism | Small, plastic lever or button labeled “Safety” or “Lock” | Prevents the stapler from firing when engaged |
Opening the Stapling Arm
To open the stapling arm for inserting staples or clearing jams:
- Locate the release lever on the side of the stapler.
- Squeeze the lever and lift the stapling arm upwards.
- The stapling arm will remain open for easy access.
- Detailed Explanation of Step 3:
Step Explanation 3.1 Locate the two locking tabs on the underside of the stapling arm. 3.2 Gently push the locking tabs inward to release the stapling arm from its locked position. 3.3 The stapling arm will slightly fall open, providing enough clearance for staple insertion or jam removal. - When finished, close the stapling arm by pressing down on it until it clicks into place.
How to Open Swingline Stapler Heavy Duty
Swingline staplers are known for their durability and ease of use. However, if you need to open one up to clear a jam or add more staples, it’s important to know the proper way to do so. Here’s a step-by-step guide on how to open a Swingline stapler heavy duty:
- **Push the release button.** The release button is located on the top of the stapler. Push it down to release the stapler’s jaws.
- **Pull the jaws apart.** Once the jaws are released, you can pull them apart to open the stapler.
- **Clear the jam or add staples.** If there is a jam, remove the staples that are causing the problem. If you need to add more staples, simply insert them into the staple magazine.
- **Close the jaws.** Once you have cleared the jam or added more staples, close the stapler’s jaws by pushing them together.
- **Push the release button again.** This will lock the jaws in place.
People Also Ask
How do I fix a jammed Swingline stapler?
If your Swingline stapler is jammed, you can try the following steps:
- Push the release button to open the stapler’s jaws.
- Remove the staples that are causing the jam.
- Close the stapler’s jaws and push the release button again to lock them in place.
How do I add staples to a Swingline stapler?
To add staples to a Swingline stapler, simply insert them into the staple magazine. The staple magazine is located on the bottom of the stapler.
What size staples does a Swingline stapler use?
Swingline staplers use standard-sized staples. These staples are 1/4 inch wide and 5/16 inch long.
