5 Easy Steps to Pair En-33926a Remote with Hisense TV Without Code

En-33926a Remote and Hisense TV

In the realm of home entertainment, seamless control over your television is imperative. Imagine being able to navigate channels, adjust volume, and access streaming services with effortless ease. If you’re a proud owner of a Hisense TV and have recently acquired an EN-33926A remote, this guide will embark on an illuminating journey to pair your remote without the hassle of codes. Prepare to unlock the full potential of your home entertainment experience.

To commence the pairing process, begin by ensuring both your Hisense TV and EN-33926A remote are powered on. Next, locate the small pairing button situated on the back of your TV, typically near the power input. With your finger poised over the pairing button, proceed to press and hold the “SOURCE” button on your remote for approximately 3-5 seconds. As you patiently hold the “SOURCE” button, observe the remote’s LED indicator; when it begins to flash rapidly, release both buttons.

Marvel as the pairing process transpires. Within a few moments, your EN-33926A remote will establish a secure connection with your Hisense TV. To verify the successful pairing,尝试操作电视的音量、频道和电源等基本功能。如果遥控器能够正常操控电视，您便已大功告成，尽情享受无缝的电视控制体验吧！

$title$

Power Cycle the TV

Power cycling the TV involves turning it off and on again. This can help reset the TV’s internal settings and establish a fresh connection with the remote control. Here are detailed steps on how to power cycle your Hisense TV:

1. Disconnect the TV from Power

Unplug the TV’s power cord from the electrical outlet. Wait for approximately 60 seconds to allow any residual power to dissipate from the TV’s components.

2. Reconnect the TV to Power

After 60 seconds, plug the power cord back into the electrical outlet. The TV will automatically turn on. If it does not, press the power button on the TV or remote control to turn it on.

3. Check the Connection

Once the TV is on, check if the remote control is working. Try changing the channel or adjusting the volume. If the remote control functions correctly, the power cycle has successfully reset the connection between the remote and the TV.

4. Repeat if Necessary

In some cases, a single power cycle may not be sufficient. If the remote control is still not working, repeat steps 1-3 above. Multiple power cycles can help troubleshoot any underlying issues that may be interfering with the connection.

Additional Tips:

If the remote control is still not working after following the steps above, try cleaning the remote control’s batteries and battery terminals. You may also want to check if there are any obstructions between the remote control and the TV that could be blocking the signal.

Check Battery and Position

Before attempting to pair your EN-33926A remote with your Hisense TV without a code, it’s crucial to ensure that the remote’s batteries are fresh and functioning correctly. Replace old or weak batteries with new ones to provide ample power for pairing.

Furthermore, proper remote positioning is essential for successful pairing. Point the remote directly at the TV’s infrared (IR) sensor, usually located near the center of the bottom edge of the TV screen. This positioning ensures that the pairing signals are transmitted effectively.

Additional Tips for Remote Alignment

To enhance the success rate of pairing, consider the following additional tips:

Tip	Description
Distance	Maintain a short distance (1-3 feet) between the remote and the TV.
Angle	Avoid holding the remote at an angle. Keep it pointing straight at the IR sensor.
Line-of-Sight	Ensure that there are no obstacles blocking the line-of-sight between the remote and the TV.

Use the Auto-Scan Feature

Step 1: Turn on your TV.

Press the power button on your Hisense TV to turn it on. Make sure that the TV is on the correct input source for your device.

Step 2: Press and hold the “Pair” button on the remote.

Locate the “Pair” button on your En-33926a remote. It is typically located on the back of the remote, near the battery compartment. Press and hold the “Pair” button for 3 seconds.

Step 3: Wait for the remote to scan for codes.

The remote will start scanning for codes that are compatible with your Hisense TV. This process can take several minutes.

Step 4: Release the “Pair” button when the remote finds a code.

Once the remote finds a code that works with your TV, the LED light on the remote will turn off. Release the “Pair” button.

Step 5: Test the remote.

Press the buttons on the remote to test if they are working properly. If the buttons are not working, repeat steps 2-4.

Step 6: Save the code.

Once you have found a code that works, press the “Save” button on the remote. This will save the code so that you do not have to repeat the pairing process in the future.

Troubleshooting

If you are having trouble pairing your En-33926a remote with your Hisense TV, try the following troubleshooting tips:

* Make sure that the batteries in the remote are fresh.
* Make sure that the remote is pointed towards the TV when you are pressing the buttons.
* Try moving the remote closer to the TV.
* If you have tried all of the troubleshooting tips and you are still unable to pair the remote, contact Hisense customer support for assistance.

Try the Master Code

If your Hisense TV is not responding to any of the codes listed in the manual, you can try using the master code. The master code is a universal code that works with most Hisense TVs. To use the master code, follow these steps:

Turn on your Hisense TV.
Press and hold the “Power” button on your remote control until the LED light on the remote control flashes twice.
Enter the master code 981.
Press the “OK” button on your remote control.

If the master code worked, the LED light on your remote control will flash twice and the TV will turn off. You can now use your remote control to operate your Hisense TV.

Troubleshooting Tips
If the master code does not work, try the following troubleshooting tips:
– Make sure that the batteries in your remote control are fresh.
– Make sure that there are no obstructions between your remote control and your Hisense TV.
– Try resetting your Hisense TV.

Turn On the TV

Make sure your Hisense TV is turned on and ready to receive signals from the remote.

Point the Remote at the TV

Ensure the remote is pointed directly at the TV and within close range, typically within 10 feet.

Press and Hold the “Mute” and “Source” Buttons

Simultaneously press and hold the “Mute” and “Source” buttons on the remote for about 5 seconds.

Enter the Pairing Code

A pairing code will appear on the TV screen. Quickly enter this code using the numeric keypad on the remote.

Press the “Enter” Button

Once you have entered the pairing code, press the “Enter” button on the remote to complete the pairing process.

Reset the TV

If the pairing process is unsuccessful, you may need to reset the TV to its factory settings. Here’s how:

Using the TV’s Remote

Navigate to the TV’s “Settings” menu using the remote.

Locate the “System” or “Reset” section and select it.

Choose the “Factory Reset” or “Hard Reset” option.

Confirm your selection by entering the TV’s password if prompted.

Using the TV’s Buttons

If you don’t have the remote, you can reset the TV using the buttons on the TV itself:

Locate the Reset or Recovery Buttons on the TV:

TV Model	Button Location
Some Hisense TVs	Small hole on the back or side of the TV labeled “Reset”
Other Hisense TVs	Combination of buttons on the TV’s bezel (e.g., Volume Down + Power)

Press and hold the Reset or Recovery buttons for the specified amount of time as indicated in the TV’s user manual.

Release the buttons and wait for the TV to complete the reset process.

Contact Hisense Support

If you have tried all of the above troubleshooting steps and are still unable to pair your remote, you may need to contact Hisense customer support. They may be able to provide you with additional assistance or troubleshoot the problem over the phone or email.

Additional Troubleshooting Tips

Here are some additional troubleshooting tips that you can try:

Make sure that the batteries in the remote are fresh and that they are inserted correctly.
Try pairing the remote at a closer distance to the TV.
Try pairing the remote from different angles.
If you are still having problems pairing the remote, you may need to reset the TV. To do this, unplug the TV from the power outlet and wait 60 seconds before plugging it back in.

Factory Reset

If all else fails, you may need to perform a factory reset on the TV. This will erase all of the settings on the TV, including the remote pairing information. To perform a factory reset, follow these steps:

Unplug the TV from the power outlet.
Wait 60 seconds.
Press and hold the power button on the TV for 5 seconds.
Release the power button.
Plug the TV back into the power outlet.
The TV will now turn on and start the setup process.

Once the TV has finished the setup process, you will need to pair the remote again.

Use a Universal Remote App

If you don’t have a physical universal remote, you can use a smartphone app to control your Hisense TV. There are many different universal remote apps available, so be sure to choose one that is compatible with your phone and TV.

Pairing the App with Your TV

1. Download and install the universal remote app on your phone.
2. Open the app and follow the instructions to pair it with your TV. This usually involves entering a code or connecting to your TV’s Wi-Fi network.
3. Once the app is paired, you will be able to control your TV using your phone.

Using the App

1. Once you have paired the app with your TV, you can use it to control all of the TV’s functions. This includes turning the TV on and off, changing the channel, adjusting the volume, and accessing the TV’s menu.
2. Most universal remote apps also have a number of additional features, such as the ability to control other devices in your home, create macros, and schedule recordings.
3. Explore the app’s features to see what it can do. You may be surprised at how much you can do with a universal remote app.

Pros	Cons
Convenient and easy to use Can control multiple devices Often has additional features	May not be as reliable as a physical remote Can drain your phone’s battery May not be compatible with all TVs

Pair Manually Using the Buttons

To pair the EN-33926A remote with your Hisense TV without a code, you can follow these steps:

Make sure that your TV is turned off.
Locate the pairing button on your TV. On most Hisense TVs, this button is located on the back or side of the TV.
Press and hold the pairing button for 5 seconds.
The TV will enter pairing mode, and the LED indicator will start blinking.
On the EN-33926A remote, press and hold the “TV” button and the “OK” button simultaneously for 5 seconds.
The remote will enter pairing mode, and the LED indicator will start blinking.
When the LED indicators on both the TV and the remote start blinking rapidly, release the buttons.
Press the “OK” button on the remote to complete the pairing process.
Wait for the LED indicators on both the TV and the remote to turn solid. This indicates that the pairing was successful.

If the pairing is successful, you will be able to use the EN-33926A remote to control your Hisense TV.

Here is a table summarizing the steps for pairing the EN-33926A remote with a Hisense TV without a code:

Step	Action
1	Turn off the TV.
2	Find the pairing button on the TV.
3	Press and hold the pairing button for 5 seconds.
4	On the EN-33926A remote, press and hold the “TV” button and the “OK” button simultaneously for 5 seconds.
5	Release the buttons when the LED indicators start blinking rapidly.
6	Press the “OK” button on the remote to complete the pairing process.
7	Wait for the LED indicators to turn solid.

Connect via Bluetooth (if applicable)

For newer Hisense TVs that support Bluetooth connectivity, you can pair your En-33926a remote without relying on codes:

Ensure that your TV’s Bluetooth is enabled.
On your remote, simultaneously press and hold the "Home" and "Back" buttons for about 3 seconds, or until the LED indicator on the remote blinks.
Go to your TV’s Bluetooth settings and search for available devices.
Select "En-33926a Remote" from the list of discovered devices.
If prompted, enter the pairing code displayed on your TV screen. The default code is usually "0000" or "1234".
Once the pairing is successful, the LED indicator on the remote should stop blinking and stay on.

Advanced Troubleshooting Tips

Check for obstructions: Objects or walls between the TV and remote can block the Bluetooth signal. Move closer or remove any obstacles.
Reset the remote: Remove the batteries from the remote and insert them back in. This will clear any temporary glitches.
Unpair and re-pair: If you encounter persistent issues, unpair the remote from your TV’s Bluetooth settings. Then, repeat the pairing process from the beginning.
Update the TV’s firmware: Check for any available firmware updates for your Hisense TV. Updates can sometimes address Bluetooth connectivity issues.
Contact customer support: If you have tried all the above steps and still cannot pair your remote, contact Hisense customer support for further assistance.

Pair En-33926a Remote With Hisense Tv Without Code

Finding the correct Hisense TV codes can be challenging. Fortunately, it’s possible to pair the EN-33926A remote to your Hisense TV without using a code.

Troubleshoot Connection Issues

1. Reset the Remote

To reset the remote, press and hold the “Home” and “Back” buttons for 10 seconds. Verify that the pairing light flashes to indicate successful reset.

2. Turn On the TV

Switch on the Hisense TV you wish to pair the remote with.

3. Hold the Pairing Button

Locate the “Pairing” button on the EN-33926A remote. Press and hold it for 5 seconds. The remote’s light should begin flashing.

4. Point the Remote at the TV

While holding down the pairing button, point the remote directly at the Hisense TV.

5. Wait for Connection

After a few seconds, the remote should connect to the TV. The light will stop flashing and stay solid. Release the pairing button.

6. Test the Remote

Check if the remote is functional by using its buttons. It should control functions like volume, channel changing, and power on/off.

7. Repeat if Necessary

If the pairing is unsuccessful, repeat steps 1-6.

8. Check Batteries

Ensure that the EN-33926A remote has fresh batteries. Weak batteries may interfere with pairing.

9. Obstructions

Verify that there are no obstructions between the remote and the TV. Objects like walls or furniture can block the pairing signal.

10. Contact Support

If you’ve gone through the troubleshooting steps and are still encountering problems, contact Hisense customer support for assistance.

How to Pair EN-33926A Remote with Hisense TV Without Code

Pairing the EN-33926A remote with your Hisense TV without a code is a simple process. Here are the steps:

Turn on your Hisense TV.

Press and hold the “Home” button on the EN-33926A remote for 3 seconds.

The remote will enter pairing mode and the LED will flash.

Press the “Power” button on the EN-33926A remote.

The TV will turn off and then back on. The remote is now paired.