The Bose Noise Cancelling Headphones 700 HP are a high-quality pair of wireless headphones that offer excellent sound quality and noise cancellation. If you’re looking to pair your headphones with a new device, you’ll need to put them into pairing mode. Here’s a step-by-step guide on how to do it:
First, make sure that your headphones are turned off. Then, press and hold the power button for 5 seconds until you hear a voice prompt that says “Bluetooth pairing.” The LED indicator light on the headphones will also start flashing blue and red. Your headphones are now in pairing mode and ready to be connected to a new device.
Once your headphones are in pairing mode, open the Bluetooth settings on your device and select “Bose Noise Cancelling Headphones 700 HP” from the list of available devices. If you’re prompted to enter a passcode, enter “0000.” Once the pairing process is complete, you’ll hear a voice prompt that says “Bluetooth connected.” Your headphones are now successfully paired with your device and you can start listening to your music.
Activating Pairing Mode for Bose Noise Cancelling Headphones 700
1. Locate the Power and Bluetooth Buttons
To put your Bose Noise Cancelling Headphones 700 into pairing mode, start by identifying the power button and the Bluetooth button on the right earcup. The power button is a small, round button located on the top of the earcup, while the Bluetooth button is a slightly larger, rectangular button located just below the power button.
Once you have located the buttons, press and hold the power button for 5 seconds. You will hear a voice prompt indicating that the headphones are powered on. Immediately after powering them on, press and hold the Bluetooth button for 3 seconds. You will hear a second voice prompt indicating that the headphones are in pairing mode.
Your Bose Noise Cancelling Headphones 700 are now in pairing mode and can be connected to your Bluetooth device. The headphones will remain in pairing mode for 2 minutes before automatically turning off. If you do not connect the headphones to a device within this time, you will need to repeat the pairing process.
| Step | Action |
|---|---|
| 1 | Press and hold the power button for 5 seconds. |
| 2 | Immediately after powering on, press and hold the Bluetooth button for 3 seconds. |
| 3 | The headphones will enter pairing mode. |
| 4 | Connect your Bluetooth device to the headphones within 2 minutes. |
Step-by-Step Guide to Entering Pairing Mode
To put your Bose Noise Cancelling Headphones 700 HP into pairing mode, follow these steps.
1. Turn on your headphones
Press and hold the power button on the right earcup for 3 seconds until you hear a chime and the LED indicator light flashes blue.
2. Enter pairing mode
There are two ways to enter pairing mode on your Bose Noise Cancelling Headphones 700 HP:
- Manual pairing: Press and hold the Bluetooth button on the left earcup for 5 seconds until you hear a chime and the LED indicator light flashes blue.
- NFC pairing: If your device supports NFC, simply touch the NFC logo on the right earcup of your headphones to your device. You will hear a chime and the LED indicator light will flash blue when pairing is complete.
Once your headphones are in pairing mode, the LED indicator light will flash blue. Your headphones will also be listed in the Bluetooth settings menu on your device. Select your headphones from the list to complete the pairing process.
3. Connect to a device
Once your headphones are in pairing mode, they will automatically connect to the last device they were paired with. To connect to a new device, simply select your headphones from the Bluetooth settings menu on your device.
4. Troubleshooting
If you are having trouble pairing your Bose Noise Cancelling Headphones 700 HP, here are a few things to try:
| Issue | Solution |
|---|---|
| Can’t find my headphones in the Bluetooth settings menu on my device | Make sure that your headphones are in pairing mode. |
| My headphones won’t connect to my device | Try restarting your headphones and your device. |
| The sound quality is poor | Make sure that your headphones are connected to the correct Bluetooth profile. |
Utilizing Physical Buttons to Enable Pairing
This method is particularly convenient when you need to pair your Bose NC 700 HP headphones quickly and easily. Follow these steps:
- Ensure that the headphones are powered off.
- Locate the Bluetooth button on the right earcup. It is typically positioned beneath the power button.
-
Hold down the Bluetooth button for approximately 5 seconds until you hear a series of flashing white lights on the headphones. These lights indicate that the headphones are now in pairing mode.
Note: To distinguish between entering pairing mode and turning on the headphones, simply hold down the power button until you hear a solid white light indicating that the headphones are turned on.
Troubleshooting Pairing Mode
If you encounter any issues while attempting to enter pairing mode, consider the following tips:
| Issue | Solution |
|---|---|
| Headphones do not enter pairing mode | Make sure the headphones are powered off before pressing the Bluetooth button. |
| Headphones do not connect to the desired device | Verify that the Bluetooth settings on your device are enabled and that the headphones are visible on the list of available connections. |
Using Voice Assistant for Pairing Activation
For devices with voice assistant compatibility, such as Siri or Google Assistant, you can initiate the pairing process hands-free. Simply say the designated command, usually “pair Bluetooth” or “connect Bluetooth,” and your voice assistant will automatically scan for available devices.
Step 1: Activate Voice Assistant
To activate your voice assistant, reference the user manual of your device or simply say the designated wake word, such as “Hey Siri” or “OK Google.”
Step 2: Initiate Pairing Command
Once your voice assistant is active, clearly state the command to initiate Bluetooth pairing. The specific command may vary depending on your device, but typical phrases include “pair Bluetooth” or “connect Bluetooth.”
Step 3: Scan and Connect
The voice assistant will scan for nearby Bluetooth devices and display a list of options. Locate “Bose NC 700 HP” and say “connect” or tap on the device’s name to establish the connection.
| Voice Assistant | Wake Word | Pairing Command |
|---|---|---|
| Siri | “Hey Siri” | “Pair Bluetooth” or “Connect Bluetooth” |
| Google Assistant | “OK Google” | “Pair Bluetooth” or “Connect Bluetooth” |
The Importance of Entering Pairing Mode
Pairing mode is a crucial step in connecting your Bose NC 700 HP headphones to your Bluetooth devices. It allows your headphones to become discoverable and establish a wireless connection. Without entering pairing mode, your headphones will not be visible to your devices, and you will not be able to stream audio or make calls.
Steps to Enter Pairing Mode
1. Power on the Headphones
To power on your Bose NC 700 HP headphones, press and hold the power button located on the right earcup for a few seconds until the LED indicator flashes white. This indicates that the headphones are powered on.
2. Enter Pairing Mode
To enter pairing mode, press and hold the Bluetooth button located on the left earcup for a few seconds until you hear a voice prompt saying, “Ready to pair.” The LED indicator will start flashing blue, indicating that the headphones are in pairing mode.
3. Open Bluetooth Settings on Your Device
On your Bluetooth-enabled device (e.g., smartphone, laptop), open the Bluetooth settings menu. This may vary depending on your device’s operating system.
4. Search for Headphones
In the Bluetooth settings menu, scan for nearby Bluetooth devices. Your Bose NC 700 HP headphones should appear in the list of available devices. Tap or select the headphones to initiate a pairing request.
5. Complete the Pairing Process
Once you have selected your headphones, follow any additional instructions on your device’s screen to complete the pairing process. Typically, you may need to enter a PIN code or confirm the connection. Once the pairing is successful, the LED indicator on your headphones will turn solid blue.
| Operating System | Instructions |
|---|---|
| iOS | Open Settings > Bluetooth > Search for headphones > Tap on headphones to pair |
| Android | Open Settings > Bluetooth > Scan for headphones > Select headphones to pair |
| Windows | Open Settings > Bluetooth & devices > Add Bluetooth device > Select headphones |
How to Put Bose NC 700 HP in Pairing Mode
Before you can connect your Bose NC 700 HP to your device, you must put it in pairing mode. To do this:
- Press and hold the power button for 3 seconds. The LED indicator will flash blue.
- Release the power button when the LED indicator flashes blue.
- Your Bose NC 700 HP is now in pairing mode and ready to be connected to your device.
Troubleshooting Common Pairing Issues
If you are having trouble pairing your Bose NC 700 HP, try the following troubleshooting tips:
Make sure that your Bose NC 700 HP is in pairing mode
The LED indicator should be flashing blue. If it is not, press and hold the power button for 3 seconds to put your Bose NC 700 HP in pairing mode.
Make sure that your device is in pairing mode
The steps for putting your device in pairing mode will vary depending on the device. Please consult your device’s user manual for instructions.
Make sure that your Bose NC 700 HP and your device are within range of each other
The maximum range for Bluetooth pairing is 33 feet (10 meters). If your Bose NC 700 HP and your device are too far apart, they will not be able to pair.
Make sure that there are no obstructions between your Bose NC 700 HP and your device
Walls, furniture, and other objects can block Bluetooth signals. If there are any obstructions between your Bose NC 700 HP and your device, try moving them out of the way.
Restart your Bose NC 700 HP
Restarting your Bose NC 700 HP can help to clear any software glitches that may be preventing it from pairing. To restart your Bose NC 700 HP, press and hold the power button for 10 seconds. The LED indicator will turn red and then turn off. Your Bose NC 700 HP will then restart.
Reset the Bose NC 700 HP
Resetting the Bose NC 700 HP will delete all of its paired devices and restore it to its factory default settings. To reset the Bose NC 700 HP, press and hold the power button and the volume down button at the same time. Hold both buttons for 10 seconds. The LED indicator will turn red and then turn off. Your Bose NC 700 HP will then reset.
| Troubleshooting Tip | Description |
|---|---|
| Make sure that your Bose NC 700 HP is in pairing mode | The LED indicator should be flashing blue. |
| Make sure that your device is in pairing mode | The steps for putting your device in pairing mode will vary depending on the device. |
| Make sure that your Bose NC 700 HP and your device are within range of each other | The maximum range for Bluetooth pairing is 33 feet (10 meters). |
| Make sure that there are no obstructions between your Bose NC 700 HP and your device | Walls, furniture, and other objects can block Bluetooth signals. |
| Restart your Bose NC 700 HP | Restarting your Bose NC 700 HP can help to clear any software glitches that may be preventing it from pairing. |
| Reset the Bose NC 700 HP | Resetting the Bose NC 700 HP will delete all of its paired devices and restore it to its factory default settings. |
Enhancing Bluetooth Connectivity with Pairing Mode
The Bose Noise Cancelling Headphones 700 HP are renowned for their exceptional audio quality and noise-canceling capabilities. To fully utilize the headphones’ Bluetooth connectivity, it is essential to place them in pairing mode, which allows them to connect to your Bluetooth-enabled devices.
Steps to Put Bose NC 700 HP in Pairing Mode
-
Power on the Headphones: Press and hold the power button for 3 seconds until you hear a chime.
-
Enter Pairing Mode: While holding the power button, press and hold the Bluetooth button for 5 seconds. You will hear a series of chimes, indicating that the headphones have entered pairing mode.
-
Open Device Bluetooth Menu: On your Bluetooth-enabled device (e.g., smartphone, laptop), navigate to the Bluetooth settings.
-
Scan for Bluetooth Devices: Select the option to search for new Bluetooth devices.
-
Select “Bose NC 700 HP”: Once the headphones appear on the list of available devices, select “Bose NC 700 HP” to initiate the pairing process.
-
Enter Pairing Code (if prompted): If necessary, enter the default pairing code “0000” into your device.
-
Confirm Pairing: Once the headphones and your device are paired, you will hear a confirmation chime. The headphones will now be connected to your device via Bluetooth.
Additional Tips for Pairing
-
Ensure that the headphones are within range of your Bluetooth device (typically up to 30 feet).
-
If pairing fails, try resetting the headphones by pressing and holding the power and Bluetooth buttons for 10 seconds.
Troubleshooting Common Pairing Issues
The following table provides information on common pairing issues and potential solutions:
| Issue | Solution |
|---|---|
| Headphones not appearing on device list | – Check if the headphones are powered on and in pairing mode. – Ensure that your device’s Bluetooth is enabled. – Move closer to the headphones. – Reset the headphones. |
| Pairing unsuccessful | – Enter the pairing code correctly. – Reset the headphones. – Disable and re-enable Bluetooth on your device. |
| Intermittent Bluetooth connection | – Move closer to the headphones. – Check for any physical obstructions. – Disconnect and reconnect the headphones. |
Setting Pairing Mode for the Bose Noise Cancelling Headphones 700
To initiate pairing mode on the Bose Noise Cancelling Headphones 700, follow these steps:
- Ensure that the headphones are powered on by pressing and holding the power button for 3 seconds.
- Locate the action button on the right earcup.
- Press and hold the action button for 5 seconds.
- The LED indicator will flash blue, indicating that the headphones are in pairing mode.
Maximizing the Headphones’ Potential through Pairing
Enhanced Sound Quality
Pairing the headphones with supported devices enables access to the full range of sound optimization features, maximizing audio quality and delivering an immersive listening experience.
Customization Options
Through the Bose Connect app, users have access to customizable settings for noise cancellation, EQ profiles, and other features, allowing for a tailored listening experience.
Voice Assistant Integration
Pairing with smartphones grants access to voice assistants such as Siri or Google Assistant, enabling hands-free control of music, calls, and other functions.
Multiple Device Connectivity
The headphones support simultaneous pairing with up to two devices, allowing for seamless switching between audio sources, such as a laptop and smartphone.
Firmware Updates
Pairing the headphones with the Bose Connect app ensures timely access to firmware updates, which enhance performance, stability, and add new features.
Troubleshooting Pairing Issues
If you encounter difficulties while pairing, consider the following:
- Ensure that the headphones are charged.
- Restart the headphones by holding the power button for 10 seconds.
- Temporarily disable Bluetooth on the target device.
- Verify that there are no obstacles or interference in the surrounding environment.
How to Tell if Pairing Mode is Active
When the headphones are in pairing mode, the LED indicator on the right earcup will flash blue. Additionally, a voice prompt will announce that the headphones are ready to pair.
Achieving Seamless Device Synchronization via Pairing Mode
Step 1: Power On the Bose NC 700 Headphones
Locate the power button on the right earcup and press it for 3 seconds.
Step 2: Enter Pairing Mode
Once the headphones are powered on, press and hold the Bluetooth button for 5 seconds. The status indicator will flash blue, indicating that the headphones are in pairing mode.
Step 3: Enable Bluetooth on Your Device
On your smartphone or other Bluetooth-enabled device, navigate to the Bluetooth settings and ensure it is turned on.
Step 4: Search for Available Devices
Your device will automatically start scanning for nearby Bluetooth devices. Look for “Bose NC 700” in the list of available devices.
Step 5: Select and Pair
Tap on “Bose NC 700” to initiate the pairing process. The status indicator on the headphones will turn solid blue once the pairing is successful.
Step 6: Verify Connection
Once the headphones are paired, check if they are successfully connected by playing audio from your device.
Step 7: Multipoint Connection (Optional)
If you want to connect the headphones to multiple devices simultaneously, enable “Multipoint” in the Bluetooth settings of your Bose Connect app.
Step 8: Power Off Pairing Mode
If you want to stop the pairing process, press the Bluetooth button again for 3 seconds, or simply wait for 3 minutes. The headphones will automatically exit pairing mode.
Step 9: Troubleshooting Pairing Issues
Troubleshooting pairing issues may require additional steps.
| Issue | Possible Solution |
|---|---|
| Headphones not appearing in device list | Reset the headphones by holding the power button for 10 seconds. |
| Pairing unsuccessful | Check if the headphones are in range and try pairing again. |
| Connection unstable | Move closer to the connected device or remove obstacles between them. |
Ensuring Optimal Audio Performance with Proper Pairing
1. Powering On the Bose NC 700 HP
To begin the pairing process, ensure the Bose NC 700 HP is turned on by pressing and releasing the Power button located on the right earcup.
2. Activating Pairing Mode
With the headphones powered on, press and hold the Bluetooth button on the right earcup for approximately 5 seconds, or until the power indicator light flashes blue and white alternately.
3. Making the Headphones Discoverable
Once pairing mode is activated, the Bose NC 700 HP will become discoverable by other Bluetooth devices. Ensure that the headphones are within the Bluetooth range of your device.
4. Initiating Pairing from Your Device
Open the Bluetooth settings on your device and search for available Bluetooth devices. Select “Bose NC 700 HP” from the list of detected devices.
5. Confirming Pairing
Once your device and the headphones are connected, the power indicator light on the right earcup will turn solid blue, and you will hear a voice prompt indicating successful pairing.
6. Troubleshooting Pairing Issues
If you encounter any difficulties pairing the headphones to your device, try resetting the headphones. Press and hold both the Power button and the Bluetooth button on the right earcup simultaneously for 10 seconds, then release and re-initiate pairing.
7. Enhancing Audio Performance with the Bose Connect App
For an optimal listening experience, download and install the Bose Connect app on your device. The app provides access to additional features and settings, such as customizing the sound profile and adjusting the noise cancellation level.
8. Adjusting the Volume and Noise Cancellation
Use the volume buttons on the left earcup to adjust the audio volume. Press the Action button on the right earcup to cycle through different noise cancellation modes (Quiet Mode, Aware Mode, or Off).
9. Using the Voice Assistant
To activate the voice assistant on your connected device, press and release the Action button on the right earcup. You can then use voice commands to control music playback, make calls, or access information.
10. Technical Specifications
Bluetooth Version: Bluetooth 5.0
Frequency Range: 20 Hz – 20 kHz
Battery Life: Up to 20 hours with noise cancellation off, up to 15 hours with noise cancellation on
Microphone Type: Four-microphone array with beamforming technology
How to Put Bose NC 700 HP in Pairing Mode
To put your Bose NC 700 HP headphones in pairing mode, follow these steps:
- Power on the headphones by holding down the power button for 2 seconds.
- Once the headphones are powered on, press and hold the Bluetooth button for 5 seconds.
- The headphones will enter pairing mode and the Bluetooth indicator light will begin to flash blue.
- Open the Bluetooth settings on your device and select “Bose NC 700 HP” from the list of available devices.
- Once the headphones are paired, the Bluetooth indicator light will turn solid blue.
People Also Ask
Can I connect my Bose NC 700 HP headphones to multiple devices?
Yes, you can connect your Bose NC 700 HP headphones to multiple devices at the same time. To do this, first put the headphones in pairing mode. Then, open the Bluetooth settings on each device you want to connect to and select “Bose NC 700 HP” from the list of available devices.
How do I reset my Bose NC 700 HP headphones?
To reset your Bose NC 700 HP headphones, follow these steps:
- Power on the headphones by holding down the power button for 2 seconds.
- Once the headphones are powered on, press and hold the volume up and volume down buttons simultaneously for 10 seconds.
- The headphones will power off and then back on again. The Bluetooth indicator light will flash blue and the headphones will be in pairing mode.
How do I update the firmware on my Bose NC 700 HP headphones?
To update the firmware on your Bose NC 700 HP headphones, you will need to use the Bose Connect app. Once you have downloaded and installed the app, open it and connect your headphones to your device. The app will then check for any available firmware updates and prompt you to install them.
