Replacing a doorknob is an easy project that many people can do. It is a good idea to check the doorknob before you start to make sure that it is the only part that needs to be replaced. Check the latch and the strike plate to see if they are working properly. If they are not, you may need to replace them as well. This article will make everything clear on how to put on a doorknob all by yourself. First, gather the tools and materials you will need. You will need a screwdriver, a Phillips head or a flat head depending on the type of screws that are holding the doorknob in place, a new doorknob, and a latch if you are replacing that as well. Place the new doorknob on the spindle. Make sure that the set screw is facing inward. Tighten the set screw with the screwdriver until the doorknob is secure. Reattach the doorknob to the door. Slide the doorknob onto the spindle. Make sure that the shaft of the doorknob is properly aligned with the hole in the door.
Now that you have replaced the doorknob, it is important to test it to make sure that it is working properly. Open and close the door several times to make sure that the doorknob turns smoothly and that the latch engages with the strike plate. If the doorknob is not working properly, you may need to adjust the latch or the strike plate. If you are not comfortable making these adjustments yourself, you can call a locksmith to help you. Replacing a doorknob is a simple project that can be completed in a few minutes. By following these instructions, you can easily replace a doorknob yourself and save money on the cost of hiring a locksmith.
Finally, if you are replacing the latch as well, remove the old latch from the door. Remove the screws that are holding the latch in place. Slide the new latch onto the spindle. Make sure that the latch is facing the correct direction. Tighten the screws to secure the latch in place. Reattach the doorknob to the door. Slide the doorknob onto the spindle. Make sure that the shaft of the doorknob is properly aligned with the hole in the door. Tighten the set screw with the screwdriver until the doorknob is secure.
Selecting the Right Doorknob
When choosing a doorknob, there are several key factors to consider:
Material: Doorknobs can be made from a variety of materials, including metal, plastic, wood, and ceramic. Metal doorknobs are durable and easy to clean, but can be more expensive. Plastic doorknobs are lightweight and affordable, but may be less durable. Wood doorknobs are stylish and warm to the touch, but require more maintenance. Ceramic doorknobs are elegant and durable, but can be fragile.
Style: Doorknobs come in a wide range of styles, from traditional to modern. Choose a style that complements the décor of your home. Traditional doorknobs are typically made of metal or wood and feature ornate designs. Modern doorknobs are often made of sleek materials and have clean lines.
Function: Doorknobs can be used for both interior and exterior doors. Interior doorknobs typically have a simple latch, while exterior doorknobs have a deadbolt for added security. Determine the function of the door before selecting a doorknob.
Size: Doorknobs come in a variety of sizes. Choose a size that is proportionate to the door and the size of your hand. The diameter of a doorknob is typically between 2-1/4 inches and 3 inches.
Finish: Doorknobs can have a variety of finishes, such as brushed nickel, polished brass, and antique bronze. Choose a finish that matches the hardware on your door and the décor of your home.
| Material | Advantages | Disadvantages |
|---|---|---|
| Metal | Durable, easy to clean | Expensive |
| Plastic | Lightweight, affordable | Less durable |
| Wood | Stylish, warm to the touch | Requires more maintenance |
| Ceramic | Elegant, durable | Fragile |
Gathering Necessary Tools
To begin the doorknob installation process, it is crucial to gather all the essential tools. Here’s a comprehensive list of the necessary items:
Essential Tools
1. New doorknob set
2. Screwdriver (Phillips or flathead, depending on the doorknob type)
– For Phillips screws: Use a Phillips screwdriver with the appropriate size to fit the screws securely.
– For flathead screws: Employ a flathead screwdriver with the correct tip size to avoid stripping or damaging the screw heads.
3. Adjustable wrench or pliers
4. Measuring tape or ruler
5. Pencil or marking tool
6. Safety glasses (optional)
Attaching the Doorknob to the Latch
Once the latch is installed, it’s time to attach the doorknob. Here’s a detailed guide:
1. Align the Doorknob Spindle
Slide the doorknob spindle (the square shaft) into the hole on one side of the latch. Make sure it’s fully inserted and aligned with the square hole on the other side.
2. Position the Doorknob
Place the doorknob over the spindle, positioning it as desired. Ensure it’s facing the correct direction (in or out).
3. Secure the Locking Collar
On the side where the doorknob is placed, there will be a locking collar (a small metal ring). Slide it over the spindle, aligning it with the groove on the doorknob.
4. Tighten the Locking Collar
Use a Phillips-head screwdriver to tighten the locking collar snugly. It should hold the doorknob firmly in place.
5. Repeat for the Other Side
Repeat steps 1-4 for the doorknob on the other side of the door. Once both doorknobs are installed and secured, the latch assembly is complete.
| Required Tools: |
|---|
| – Phillips-head screwdriver |
| – Doorknob wrench (optional) |
Aligning the Plates
To align the plates, insert the spindle into the hole in the back of the outside doorknob. Make sure the square or D-shaped end of the spindle is facing the outside of the doorknob. Insert the outside doorknob into the hole in the door. From the inside of the door, slide the inside doorknob over the spindle. Align the holes in the doorknobs with the holes in the faceplate.
Insert the screws into the holes in the faceplate and tighten them until the faceplate is secure.
Securing the Doorknob
1. Slide the rosette over the doorknob.
The rosette is the decorative piece that covers the base of the doorknob. Slide the rosette over the doorknob so that it covers the screws.
2. Tighten the set screws.
Most doorknobs have two set screws that hold the rosette in place. Use a screwdriver to tighten the set screws until the rosette is secure.
3. Test the doorknob.
Open and close the door several times to make sure the doorknob is working properly and the screws are tight.
How To Put On A Doorknob
Putting on a doorknob is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily install a new doorknob and get your door functioning properly again.
-
Remove the old doorknob. To do this, use a screwdriver to remove the screws that are holding the doorknob in place. Once the screws are removed, the doorknob will come off easily.
-
Insert the new doorknob. Take the new doorknob and insert it into the hole in the door. Make sure that the doorknob is facing the correct direction.
-
Secure the doorknob. Use the screws that came with the new doorknob to secure it in place. Tighten the screws until the doorknob is firmly in place.
-
Test the doorknob. Once the doorknob is installed, test it to make sure that it is working properly. Open and close the door several times to make sure that the doorknob is functioning smoothly.
People Also Ask
Can I put a new doorknob on myself?
Yes, you can put on a new doorknob yourself. It is a relatively simple task that can be completed in a few minutes.
What tools do I need to put on a new doorknob?
You will need a screwdriver and the screws that came with the new doorknob.
How do I know which way the doorknob should face?
The doorknob should face the direction that you want the door to open.
