Watch batteries, like all good things, eventually run out of juice. When this happens to your Timex watch, don’t despair! Replacing the battery is a relatively simple task that you can do yourself with a few basic tools. In this article, we’ll walk you through the steps on how to replace the battery in your Timex watch, so you can get back to telling time in no time.
First, you’ll need to gather a few tools. You’ll need a small Phillips head screwdriver, a watchmaker’s knife or a small flathead screwdriver, and a new battery. You can find all of these items at your local hardware store or online. Once you have your tools, you’re ready to get started.
Start by removing the back of the watch. Most Timex watches have a screw-on back, so you can simply use your screwdriver to remove the screws. If your watch has a snap-on back, you’ll need to use your watchmaker’s knife or small flathead screwdriver to pry it open. Once the back is off, you’ll see the battery. Remove the old battery and replace it with the new one, making sure that the positive and negative terminals are aligned correctly. Now, replace the back of the watch and tighten the screws. Your watch should now be working again!
Gather the Necessary Tools
Tools Required:
Replacing a battery in a Timex watch requires the following tools:
- Watchmaker’s Tool Kit: A comprehensive watchmaker’s tool kit includes various essential tools, such as a case opener, tweezers, and screwdrivers. These tools are specifically designed for manipulating delicate watch components.
- Small Flathead Screwdriver: A small, flathead screwdriver is used to remove the small screw holding the battery in place.
- Magnifying Glass: A magnifying glass helps to magnify small watch components, making it easier to see and handle them accurately.
- Soft Cloth: A soft, lint-free cloth is used to clean the watch and protect it from scratches.
- New Battery: Ensure you have a new battery of the correct size and type for your Timex watch. The battery type and size will vary depending on the specific model.
- Watch Case Pry Tool: This specialized tool is designed to pry open the watch case without damaging it.
- Watch Tweezers: Watch tweezers have fine tips, making them ideal for handling small watch components.
- Demagnetizer: A demagnetizer can help remove any magnetism from the watch’s movement, which can interfere with its accuracy.
- Ground yourself to prevent electrostatic discharge, which can damage the watch’s delicate components.
- Use a clean work surface to prevent dirt or debris from entering the watch.
- Wear gloves to prevent fingerprints or other contaminants from getting on the watch’s interior.
- Do not use sharp objects to pry open the watch, as this can damage the case or seals.
- Handle the watch carefully to avoid dropping or jarring it.
- New battery for your Timex watch
- Small watchmaker’s screwdriver
- Tweezers
- Cotton swabs
- Isopropyl alcohol
- New watch battery (SR626SW or equivalent)
- Small Phillips head screwdriver
- Tweezers or a toothpick
- Optional: Watch case opener (if your watch has a screw-down case back)
- Remove the back cover of the watch. If the back cover is held in place by screws, use a small Phillips head screwdriver to remove them. If the back cover is a snap-on type, gently pry it open using a thin tool like a butter knife or a credit card.
- Locate the battery. The battery is usually held in place by a metal clip or bracket. Use tweezers or a toothpick to gently remove the battery from the watch.
- Insert the new battery. Make sure that the positive (+) side of the battery is facing up. Use tweezers or a toothpick to gently press the battery into place.
- Replace the back cover of the watch. If the back cover is held in place by screws, tighten the screws using a small Phillips head screwdriver. If the back cover is a snap-on type, gently press it back into place until it snaps closed.
- Gather the necessary tools: a small Phillips head screwdriver and a new watch battery.
- Place the watch face down on a soft surface.
- Use the screwdriver to remove the four screws that hold the back of the watch in place.
- Carefully lift the back of the watch off.
- Locate the battery and use your fingers or a pair of tweezers to remove it.
- Insert the new battery into the watch, making sure that the positive (+) side of the battery is facing up.
- Replace the back of the watch and tighten the four screws.
- Test the watch to make sure that it is working properly.
People Also Ask About How to Replace Battery in Timex Watch
What type of battery does a Timex watch use?
Timex watches use SR626SW batteries.
How often should I replace the battery in my Timex watch?
The battery in a Timex watch should be replaced every 2-3 years.
Can I take my Timex watch to a jeweler to have the battery replaced?
Yes, you can take your Timex watch to a jeweler to have the battery replaced. However, this may cost more than doing it yourself.
Additional Optional Tools:
Remove the Backplate
To remove the backplate, you’ll need a small, flathead screwdriver or a watch repair tool. Insert the screwdriver into the notch located on the case back and twist gently to pry it open. Some Timex watches have snap-on backs, which can be removed by simply prying them off with your fingernails.
Be careful not to damage the case or the watch movement when removing the backplate. If you’re having difficulty removing the backplate, it’s best to take the watch to a jeweler or watch repair shop for assistance.
| Tool Options |
|---|
| Small, flathead screwdriver |
| watch repair tool |
Once the backplate is removed, you’ll see the battery. It’s usually held in place by a small metal clip. Use the screwdriver or watch repair tool to gently pry the clip open and remove the battery.
Locate the Battery
**Method 1: Watchback with a Notch**
1. Examine the watch case for a small notch or groove around the outer edge.
2. Insert the tip of a watch repair tool or a small screwdriver into the notch.
3. Carefully pry open the watchback by gently applying pressure to the tool or screwdriver.
**Method 2: Snap-On Watchback**
1. Hold the watch firmly in one hand.
2. Use your thumb or a watch repair tool to gently pry up one edge of the watchback.
3. Continue to work around the edge of the watchback until it pops open.
**Method 3: Screw-On Watchback**
1. Gather the necessary tools: a watch repair kit or a small precision screwdriver.
2. Identify the screws that hold the watchback in place. These are usually small, Phillips head screws.
3. Use the screwdriver to carefully unscrew each screw until the watchback comes loose.
4. Gently remove the watchback from the watch case.
| Watchback Type | Opening Method |
|---|---|
| Notch | Pry open with tool or screwdriver |
| Snap-On | Gently pry up one edge with thumb or tool |
| Screw-On | Unscrew screws with small precision screwdriver |
Remove the Old Battery
Once you have all the necessary tools, you can proceed to remove the old battery. Here are the steps:
1. Position the watch face down
Place the watch face down on a soft surface to prevent scratches. Hold the watch with one hand and use your fingers or a tool to gently pry open the back cover.
2. Use the tool or fingernail to remove the back cover
Locate the small notch or indentation on the back cover. Use the toothpick or fingernail to gently pry open the cover. If the cover is particularly tight, you can use a small screwdriver or knife, but be careful not to damage the watch.
3. Remove the battery
Once the back cover is open, you will see the battery. Gently remove it using tweezers or your fingers. Note the position of the battery so you can insert the new one correctly.
4. Inspect the battery compartment and clean if necessary
Before inserting the new battery, inspect the battery compartment for any corrosion or debris. If there is any, use a cotton swab dipped in isopropyl alcohol to gently clean the contacts and the compartment. This will ensure a good electrical connection and prevent any future problems.
Insert the New Battery
Step 1: Make Sure the Battery is Facing the Correct Way
Before inserting the new battery, check to ensure it’s facing the correct way. The positive side of the battery should be facing up, towards the domed-shaped cover inside the watch.
Step 2: Hold the Battery in Place
Use a pair of non-metallic tweezers or a small tool to carefully hold the battery in place. Avoid touching the battery directly with your fingers, as it can lead to corrosion.
Step 3: Gently Push the Battery into Place
Slowly and gently push the battery down into its compartment until it’s fully seated. Do not press down too hard, as this can damage the battery or the watch.
Step 4: Secure the Battery Cover
Once the battery is in place, carefully align the battery cover and gently push it down until it snaps into position. Make sure the cover is fully secured to keep the battery in place and prevent it from moving.
Step 5: Double-Check the Battery Orientation
After closing the cover, turn the watch over and gently shake it. If you hear any rattling or movement, it indicates that the battery is not securely in place or is facing the wrong way. Reopen the cover and check the battery’s orientation before closing it again.
| Battery Type | Diameter |
|---|---|
| CR2016 | 20 mm |
| CR2025 | 25 mm |
| CR2032 | 32 mm |
Reattach the Backplate
6.1. Hold the watch in one hand and the backplate in the other, aligning the notches or threads on the backplate with the corresponding notches or threads on the watch case.
6.2. Apply pressure to the center of the backplate, using your fingers or a soft cloth. The backplate should snap or screw into place.
6.3. If the backplate is stuck, you can try using a rubber band or a suction cup to apply more force. Be careful not to damage the watch or the backplate.
6.4. Once the backplate is secure, you can check the watch to make sure it is working properly.
6.5. If the watch is not working, you may need to check the battery again or consult a watchmaker for assistance.
Here are some additional tips for reattaching the backplate:
| Tip | Description |
|---|---|
| Use a soft cloth to avoid scratching the watch or the backplate. | Apply pressure to the center of the backplate, not the edges. |
| If the backplate is stuck, you can try using a rubber band or a suction cup to apply more force. | Be careful not to overtighten the backplate, as this can damage the watch. |
Test the Watch
Before replacing the battery, check if the watch is still working. Pull out the crown (the knob on the side of the watch) one click and turn it clockwise until the second hand starts moving. If the second hand doesn’t move, or if it moves slowly, the battery is probably dead and needs to be replaced.
For digital watches: If the screen is not displaying anything, the battery is probably dead and needs to be replaced.
For analog watches: If the hands are not moving, or if they are moving slowly, the battery is probably dead and needs to be replaced. You can also hold the watch up to your ear and listen for a ticking sound. If you can’t hear a ticking sound, the battery is probably dead.
Troubleshooting Tips
Here are some common issues you may encounter when replacing the battery in your Timex watch, along with their solutions:
I can’t open the back of the watch
Check that you are using the correct tool for your watch model. You may need to apply more pressure or try a different technique.
The battery is not making contact
Ensure the battery is properly seated in the battery compartment. Check for any debris or corrosion that may be preventing contact.
The watch is still not working
Check the connections between the battery and the watch movement. Make sure they are clean and properly aligned.
The watch is gaining or losing time
The battery may be weak or the movement may need servicing. Consider replacing the battery again or taking the watch to a watchmaker for further inspection.
The watch is water-resistant
If your watch is water-resistant, it is important to use a new O-ring when replacing the battery. This will ensure the water resistance is maintained.
The watch has a chronograph function
If your watch has a chronograph function, you may need to reset the chronograph mechanism after replacing the battery. Refer to your watch’s user manual for specific instructions.
The watch has a digital display
If your watch has a digital display, you may need to reprogram the watch after replacing the battery. This will involve resetting the time and date, as well as any other settings that were stored in memory.
The watch has a complicated movement
If your watch has a complicated movement, such as a perpetual calendar or a moonphase indicator, it is best to have the battery replaced by a qualified watchmaker. This will ensure that the movement is not damaged during the process.
Safety Precautions
Before replacing the battery in your Timex watch, it is important to take the following safety precautions:
Tools and Materials
Step-by-Step Instructions
9. Cleaning the Watch Interior
Once the old battery has been removed, it is important to thoroughly clean the watch interior to remove any dirt or debris that may have accumulated. This will help to ensure that the new battery makes good contact and that the watch functions properly. To clean the watch interior, use a cotton swab dipped in isopropyl alcohol to gently wipe down the battery compartment and any other accessible surfaces. Allow the alcohol to evaporate completely before proceeding.
| Timex Watch Model | Battery Type | Battery Size |
|---|---|---|
| T49861 | SR626SW | 1.55V |
| T5K521 | CR2032 | 3V |
| T2N701 | CR1632 | 3V |
Tools and Materials
To replace the battery in your Timex watch, you will need the following tools and materials:
Steps
Follow these steps to replace the battery in your Timex watch:
Additional Resources
Watch Battery Replacement Guide
For more detailed instructions on how to replace the battery in your Timex watch, refer to the following guide:
Replace a Watch Battery – wikiHow
Timex Customer Support
If you have any questions or need additional assistance, contact Timex customer support at:
Additional Tips
Here are some additional tips for replacing the battery in your Timex watch:
| Tip | Description |
|---|---|
| Use a new battery. | Do not use an old or used battery, as this can damage the watch. |
| Handle the battery carefully. | Avoid touching the battery with your bare hands, as this can transfer oils and dirt to the battery, which can affect its performance. |
| Replace the battery as soon as possible. | A dead battery can leak and damage the watch. |
| If you are not comfortable replacing the battery yourself, take the watch to a jeweler or watch repair shop. | A professional can quickly and safely replace the battery for you. |
How to Replace the Battery in a Timex Watch
Replacing the battery in a Timex watch is an easy process that can be completed in a few minutes. Here are the steps on how to do it:
