Has your car’s electric window suddenly stopped working, leaving you stranded with an open window? Don’t fret! While it may seem like a major inconvenience, manually rolling up an electric window is a simple task that can be accomplished in just a few steps. This manual method will allow you to close the window and protect your car from the elements until you can have it repaired. Follow the instructions below to learn how to roll up an electric window manually in a hassle-free manner.
Before you begin, gather a few essential tools: a flathead screwdriver, a pair of pliers, and a cloth or towel. You may also need a flashlight if working in low-light conditions. Start by locating the window motor, which is usually situated inside the door panel. Carefully remove the door panel by unscrewing the screws that hold it in place. Once the panel is detached, you will have access to the window motor and its components.
Next, identify the window regulator, which is the mechanism responsible for raising and lowering the window. It is typically attached to the window motor by a series of cables or gears. Locate the manual release lever on the regulator, which is usually a small, plastic or metal lever. Using the flathead screwdriver, gently pry the lever to disengage it from the motor. Once the lever is disengaged, you can manually wind up the window by turning the regulator gear clockwise. Use the pliers to grip the gear and rotate it until the window is fully closed. Secure the window in place by re-engaging the manual release lever on the regulator.
How To Roll Up Electric Window Manually
If your electric window switch fails or your vehicle’s battery dies, you may need to roll up the window manually. Here’s a step-by-step guide on how to do it:
-
Locate the manual window crank. It’s usually located on the door panel, near the window.
-
Turn the window crank clockwise to wind the window up.
People Also Ask About How To Roll Up Electric Window Manually
How do I remove the door panel to access the manual window crank?
The process of removing the door panel will vary depending on your vehicle. Consult your vehicle’s owner’s manual for specific instructions.
What if there’s no manual window crank?
If your vehicle doesn’t have a manual window crank, you may be able to use a power drill to roll up the window. Be careful not to overtighten the drill, as this could damage the window motor.
