The Armitron Pro Sport Watch is a feature-packed timepiece that offers a wide range of functions, including a stopwatch, countdown timer, and multiple alarms. One of the most important features of any watch is its ability to keep accurate time, and the Armitron Pro Sport Watch is no exception. Setting the time on this watch is a simple process that can be completed in just a few steps.
First, locate the two buttons on the right side of the watch. The upper button is the “Mode” button, and the lower button is the “Adjust” button. To enter time-setting mode, press and hold the “Mode” button for about three seconds. The display will show the current time, and the seconds digits will start flashing. Use the “Adjust” button to change the seconds digits, then press the “Mode” button to move to the minutes digits.
Repeat this process to set the hours, month, and day. Once the time is set correctly, press and hold the “Mode” button again to exit time-setting mode. The time will now be displayed correctly on the watch face. The Armitron Pro Sport Watch is a versatile and durable watch that is perfect for a variety of activities. With its easy-to-use time-setting feature, you can always be sure that you are on time for your appointments and commitments.
Finding the Time Setting Button
The Armitron Pro Sport Watch has a distinctive design with various buttons located around its casing. To identify the time setting button, examine the watch’s features closely and follow these steps:
1. **Locate the Buttons:** Inspect the edges of the watch for small, raised buttons. The watch typically has two or three buttons, depending on the model.
2. **Press and Release:** Gently press each button once or twice to observe its function. The time setting button is usually labeled with an icon representing a clock or the letter “T.”
If there is no visible label, refer to the watch’s user manual or online resources for specific button functions.
3. **Determine the Time Setting Button:** Once you have identified the button that displays the time, press and hold it for a few seconds until the time starts flashing or a “SET” prompt appears on the display. This indicates that you have found the time setting button.
| Button Location | Button Function |
|---|---|
| Top Left | Time Setting Button |
| Bottom Right | Mode Button |
| Bottom Left | Start/Stop Button |
Entering Set Mode
To enter set mode on your Armitron Pro Sport Watch, begin by pressing and holding the lower right button. Continue holding the button until the hour digits start flashing on the display. This indicates that you have successfully entered set mode.
Setting the Time
Once you have entered set mode, use the upper right and lower right buttons to adjust the hour and minute digits. The upper right button increments the digits, while the lower right button decrements them. To toggle between adjusting the hours and minutes, press the lower left button.
When the time is set correctly, press and hold the upper right button until the time starts flashing again. This will indicate that the time has been saved and you can exit set mode. To exit set mode, simply release the button.
| Button | Function |
|---|---|
| Upper right | Increment digits |
| Lower right | Decrement digits |
| Lower left | Toggle between hours and minutes |
Adjusting the Hour
To adjust the hour on your Armitron Pro Sport watch, follow these steps:
1. Pull out the crown to the first position (one click).
2. Turn the crown clockwise to move the hour hand forward or counterclockwise to move it backward.
3. Once you have reached the desired hour, carefully push the crown back into its original position and ensure it is fully seated to prevent water damage.
Note:
For accurate timekeeping, it is recommended to adjust the watch by setting the hour hand first, then the minute hand, and finally the second hand (if applicable). This sequence helps to minimize any potential error in synchronization between the hands.
Here is a table summarizing the steps for adjusting the hour on your Armitron Pro Sport watch:
| Step | Action |
|---|---|
| 1 | Pull out the crown to the first position. |
| 2 | Turn the crown clockwise to move the hour hand forward or counterclockwise to move it backward. |
| 3 | Push the crown back into its original position. |
Setting the Minutes
To set the minutes, press and hold the “Mode” button for three seconds to enter the time-setting mode. The minutes will blink on the display. Use the “Start/Stop” button to increase the minutes by one, or the “Split/Reset” button to decrease the minutes by one.
Once you have set the minutes, press the “Mode” button to confirm your selection and exit the time-setting mode.
| Button | Function |
|---|---|
| Mode | Enter/exit time-setting mode |
| Start/Stop | Increase minutes by one |
| Split/Reset | Decrease minutes by one |
Setting the Time
To set the time on your Armitron Pro Sport watch, follow these steps:
- Pull out the crown to the second click.
- Turn the crown clockwise to set the hour hand.
- Turn the crown counterclockwise to set the minute hand.
- Press the crown back in to the first click.
- Turn the crown clockwise to set the seconds hand.
Confirming the Time
To confirm the time, follow these steps:
- Pull out the crown to the first click.
- Turn the crown clockwise to set the hour hand.
- Turn the crown counterclockwise to set the minute hand.
- Press the crown back in.
- Observe the time.
If the time is not correct, repeat steps 1-4.
| Hour Hand | Minute Hand | Seconds Hand |
|---|---|---|
| Points to the hour | Points to the minute | Sweeps around the dial once per second |
Note: When setting the time, it is important to note that the date will change automatically at midnight. However, if you need to manually change the date, pull out the crown to the first click and turn it counterclockwise.
Setting the Date
To set the date on your Armitron Pro Sport watch, follow these steps:
- Press and hold the “Mode” button until the date display starts flashing.
- Use the “Forward” and “Back” buttons to adjust the month.
- Press the “Mode” button to confirm the month.
- Use the “Forward” and “Back” buttons to adjust the day.
- Press the “Mode” button to confirm the day.
- Use the “Forward” and “Back” buttons to adjust the year.
- Press the “Mode” button to confirm the year.
- Press the “Start/Stop” button to exit the date setting mode.
Additional Notes
The date format can be set to either MM/DD/YY or DD/MM/YY.
To change the date format, press and hold the “Mode” button until the date display starts flashing. Then, press the “Forward” button to toggle between the two formats.
Troubleshooting
If you are having trouble setting the date on your Armitron Pro Sport watch, try the following:
- Make sure that the watch is in the correct timekeeping mode.
- Make sure that the battery is not low.
- Try resetting the watch by pressing the “Reset” button.
Confirming the Date
1. Press and hold the “Mode” button for about three seconds. This will take you to the “Date” mode.
2. Use the “+” and “-” buttons to adjust the year.
3. Press the “Mode” button again to move to the “Month” mode.
4. Use the “+” and “-” buttons to adjust the month.
5. Press the “Mode” button again to move to the “Day” mode.
6. Use the “+” and “-” buttons to adjust the day.
7. Once you have adjusted the date, press and hold the “Mode” button for about three seconds to save the changes and exit the “Date” mode.
For Armitron Pro Sport watches with a digital display:
| Button | Function |
|---|---|
| “Adjust” | Press and hold to enter the date and time setting mode.
Press to toggle between date and time settings. Press and hold to exit the setting mode. |
| “Mode” | Press to cycle through the date and time settings (year, month, day, hour, minute, second). |
| “+” | Press to increase the value of the selected setting. |
| “-“ | Press to decrease the value of the selected setting. |
| Step | Action |
|---|---|
| 1 | Press the “Mode” button until you reach the alarm setting mode. |
| 2 | Use the “+” and “-” buttons to set the hour for the alarm. |
| 3 | Press the “Mode” button to move to the minute setting. |
| 4 | Use the “+” and “-” buttons to set the minute for the alarm. |
| 5 | Press the “Mode” button again to save the settings. |
| 6 | To turn the alarm on or off, press the “Alarm On/Off” button. |
Confirming the Alarm
Once you have set the alarm, press the “SET” button once to confirm. The display will flash, and the alarm icon will appear in the display. To confirm the alarm settings, press the “SET” button again. The display will stop flashing, and the alarm will be set.
9. Setting the Alarm Duration
After setting the alarm time, you can set the duration of the alarm. The default alarm duration is 10 minutes. To change the duration, press the “MODE” button twice to enter alarm mode. Then, press the “SET” button to select the “DURATION” option. Use the “+” and “-” buttons to adjust the alarm duration. The duration can be set between 1 and 60 minutes.
| Alarm Duration | Hours:Minutes |
|---|---|
| 1 | 00:01 |
| 5 | 00:05 |
| 10 | 00:10 (default) |
| 30 | 00:30 |
| 60 | 01:00 |
Time Setting Procedure
1. Press and hold Mode button for 3 seconds to access the Time Setting mode.
2. Use the Start/Stop and Split/Reset buttons to adjust the hour.
3. Press the Mode button to confirm the hour setting and proceed to the minute setting.
4. Use the Start/Stop and Split/Reset buttons to adjust the minutes.
5. Press the Mode button to confirm the minute setting and proceed to the second setting.
6. Use the Start/Stop and Split/Reset buttons to adjust the seconds.
7. Press the Mode button to confirm the second setting and proceed to the date setting.
8. Use the Start/Stop and Split/Reset buttons to adjust the month.
9. Press the Mode button to confirm the month setting and proceed to the day setting.
10. Use the Start/Stop and Split/Reset buttons to adjust the day.
Exiting Set Mode
1. Press the Mode button once to exit the Set Mode and return to the Timekeeping mode.
2. To enter the Set Mode again, press and hold the Mode button for 3 seconds.
| Function | Button |
|---|---|
| Adjust Hour | Start/Stop or Split/Reset |
| Confirm Hour and Proceed to Minutes | Mode |
| Adjust Minutes | Start/Stop or Split/Reset |
| Confirm Minutes and Proceed to Seconds | Mode |
| Adjust Seconds | Start/Stop or Split/Reset |
| Confirm Seconds and Proceed to Date | Mode |
| Adjust Month | Start/Stop or Split/Reset |
| Confirm Month and Proceed to Day | Mode |
| Adjust Day | Start/Stop or Split/Reset |
| Exit Set Mode | Mode |
How To Set Time On Armitron Pro Sport Watch
To set the time on your Armitron Pro Sport Watch, just follow these simple steps:
- Pull out the crown. The crown is the small knob on the side of the watch. Pull it out to the first click.
- Turn the crown to set the hour. Turn the crown clockwise to move the hour hand forward, and counterclockwise to move it backward.
- Push in the crown. Once you have set the hour, push the crown back in to the first click.
- Turn the crown to set the minutes. Turn the crown clockwise to move the minute hand forward, and counterclockwise to move it backward.
- Push in the crown. Once you have set the minutes, push the crown back in all the way.
Your watch is now set to the correct time.
People Also Ask
How do I set the date on my Armitron Pro Sport Watch?
To set the date on your Armitron Pro Sport Watch, just follow these simple steps:
- Pull out the crown. The crown is the small knob on the side of the watch. Pull it out to the second click.
- Turn the crown to set the date. Turn the crown clockwise to move the date forward, and counterclockwise to move it backward.
- Push in the crown. Once you have set the date, push the crown back in all the way.
Your watch is now set to the correct date.
How do I set the alarm on my Armitron Pro Sport Watch?
To set the alarm on your Armitron Pro Sport Watch, just follow these simple steps:
- Pull out the crown. The crown is the small knob on the side of the watch. Pull it out to the first click.
- Turn the crown to set the hour. Turn the crown clockwise to move the hour hand forward, and counterclockwise to move it backward.
- Push in the crown. Once you have set the hour, push the crown back in to the first click.
- Turn the crown to set the minutes. Turn the crown clockwise to move the minute hand forward, and counterclockwise to move it backward.
- Push in the crown. Once you have set the minutes, push the crown back in all the way.
- Slide the alarm switch to the on position. The alarm switch is located on the side of the watch. Slide it to the on position to activate the alarm.
Your alarm is now set. It will sound at the time you set it.
