4 Steps To Store Your Lawn Mower In The Garage

Man mowing the lawn

Preserving your lawn mower’s longevity and performance requires meticulous storage during the off-season. The garage, offering shelter from harsh elements, emerges as the ideal sanctuary for your mower. However, haphazard storage can compromise your machine’s integrity, diminishing its functionality and lifespan. By adopting a strategic approach to garage storage, you can ensure your lawn mower remains in pristine condition, ready to tackle the verdant challenges of spring.

Before consigning your lawn mower to the garage, a thorough cleaning is paramount. Removing accumulated dirt, grass clippings, and debris not only enhances the mower’s appearance but also prevents corrosion and blockages. Use a soft brush or compressed air to gently dislodge loose particles, paying particular attention to the deck, blades, and engine compartment. For stubborn grime, employ a mild degreaser, taking care to rinse thoroughly and allow the mower to dry completely before storage. This meticulous preparation lays the foundation for effective long-term storage.

Selecting an appropriate location within the garage is crucial. Position the lawn mower on a stable surface, ensuring it is level and protected from potential hazards. Avoid damp or humid areas, as moisture can promote rust and damage. Additionally, maintain a reasonable distance between the mower and other objects to facilitate accessibility and prevent accidental knocks or bumps. Consider placing the mower on a raised platform or shelf to elevate it from potential moisture or spills on the garage floor, further safeguarding its integrity. By adhering to these guidelines, you can create an optimal storage environment for your lawn mower, extending its lifespan and maintaining its peak performance.

Preparing Your Lawn Mower for Storage

To ensure the longevity and optimal performance of your lawn mower during the off-season, proper storage is crucial. Before storing your lawn mower for an extended period, it’s essential to take the following steps:

Cleaning Your Lawn Mower

Thoroughly cleaning your lawn mower is the most crucial step in preparing it for storage. Follow these steps to ensure a pristine machine:

Remove grass clippings and debris: Use a brush or compressed air to remove any grass clippings, leaves, or twigs from the mower deck, engine, and other surfaces.
Clean the mower deck: Using a damp cloth or a mild detergent solution, wipe down the mower deck to remove any remaining grass clippings or dirt. Rinse the deck thoroughly with water and allow it to dry completely before storage.
Clean the engine: Using a soft brush, gently remove any dirt or debris from the engine. Avoid using water or harsh cleaners on the engine, as these could damage components.
Clean the wheels and tires: Brush off any dirt or grass clippings from the wheels and tires. If necessary, use a mild detergent solution to remove any stubborn debris. Rinse the wheels and tires thoroughly and allow them to dry.

li>

Lubricate moving parts: Apply a few drops of oil to all moving parts, such as the blade spindle, pulleys, and levers. This will help prevent corrosion and ensure smooth operation when you use the mower again.

Draining Fuel and Oil

To prevent fuel and oil from degrading over time, it’s essential to drain them before storing your lawn mower:

Drain the fuel: Using a siphon or fuel pump, remove all fuel from the tank. Store the fuel in a separate, approved container for future use.
Change the oil: Replace the old oil with fresh oil according to the manufacturer’s recommendations. This will ensure that your mower has clean oil when you start it up again.

Removing the Battery

To prevent battery drain and corrosion, disconnect and remove the battery from the lawn mower:

Disconnect the negative terminal first: Using a wrench or pliers, loosen and remove the negative terminal (usually marked with a black or blue wire) from the battery.
Disconnect the positive terminal: Repeat the process for the positive terminal (usually marked with a red wire).
Store the battery in a cool, dry place: Keep the battery in a location that is not exposed to extreme temperatures or sunlight.

Storing Your Lawn Mower

Storage Location	Ideal Conditions
Garage or Shed	Dry, well-ventilated, and protected from the elements
Basement or Crawl Space	Dry and protected from moisture and pests

Regardless of the storage location, ensure that the mower is placed on a stable surface and covered with a tarp or waterproof cover to protect it from dust and moisture.

Selecting a Suitable Storage Location

Selecting an appropriate storage location for your lawn mower is crucial to ensure its longevity and optimal performance. Consider the following factors when choosing a spot:

Climate Control

Extreme temperatures and humidity can adversely affect your lawn mower. If possible, store the mower in a climate-controlled area, such as a garage or shed, with moderate temperatures and humidity levels. Avoid storing the mower outdoors in direct sunlight or freezing conditions.

Protection from Elements

Protect your lawn mower from dust, dirt, and debris. Enclose the storage area with a tarp or cover to prevent the ingress of moisture and contaminants. Additionally, elevate the mower off the ground on a platform or shelf to minimize exposure to moisture and pests.

Accessibility and Convenience

Choose a storage location that is easily accessible when you need to use the mower. Avoid placing the mower in a remote corner or cluttered area. Consider installing a shelf or hoist system to conveniently lift and store the mower.

Space Requirements

Ensure that the storage location has sufficient space for the lawn mower and any necessary accessories, such as a fuel can or battery charger. Avoid overcrowding the storage area to facilitate easy access and maintenance.

Safety Considerations

Take safety precautions when storing your lawn mower. Ensure that the storage location is dry and well-ventilated to prevent the accumulation of fumes or vapors. If the mower is gasoline-powered, store it with an empty fuel tank to minimize fire hazards.

Storage Location	Advantages	Disadvantages
Garage	Temperature and humidity control, protection from elements, easy access	Limited space, potential for moisture accumulation
Shed	Protection from sun and rain, elevated storage options	Less accessible, temperature fluctuations possible
Basement	Climate-controlled, protected from pests	Limited space, potential for flooding or high humidity

Ensuring Proper Ventilation and Lighting

Ventilation

Proper ventilation is crucial for storing a lawn mower in your garage. Stagnant air promotes moisture buildup, rust, and the growth of mold or mildew. Provide ample ventilation by opening garage doors or windows, or installing exhaust fans. Use a dehumidifier to control humidity levels and prevent condensation from forming on the mower.

Tips for Ventilation:

* Open garage doors or windows when possible.
* Install exhaust fans to circulate air and reduce moisture.
* Use a dehumidifier to absorb excess moisture.

Lighting

Good lighting is essential for safely and conveniently accessing your lawn mower. Install bright, energy-efficient lighting fixtures to illuminate the storage area and improve visibility when working on or retrieving the mower. Consider using motion-activated lights for added convenience and security.

Tips for Lighting:

* Install bright, energy-efficient lighting fixtures.
* Use motion-activated lights for convenience and security.
* Ensure the storage area is well-lit to prevent accidents.

Additional Tips for Lighting and Ventilation

Tip	Benefit
Hang the mower upright on a wall or shelf.	Promotes air circulation and keeps the mower off the ground, reducing moisture buildup.
Cover the mower with a tarp or plastic bag.	Protects from dust, debris, and insects, while allowing for some ventilation.
Check and clean the ventilation and lighting systems regularly.	Ensures optimal performance and prevents buildup of dust or blockages.

Cleaning and Lubricating the Mower

Proper maintenance is essential for keeping your lawn mower running smoothly. Before storing it, take some time to clean and lubricate it. Here are some step-by-step instructions:

General Cleaning

Start by cleaning the mower of any grass clippings, dirt, or debris. Use a brush or rag to remove loose debris, and then spray the mower down with a hose or pressure washer. Be sure to wear safety glasses to protect your eyes from any flying debris.

Lubricating Moving Parts

Once the mower is clean, apply a few drops of oil to all moving parts, such as the wheels, axles, and blade spindle. This will help to reduce friction and wear and tear. You can use a spray lubricant or a regular oil can.

Maintaining the Blade and Spark Plug

Inspect the mower blade and spark plug. If the blade is dull or damaged, it will need to be sharpened or replaced. The spark plug should be replaced every 50 hours of operation or once a year.

Additional Lubrication Tips

In addition to the general lubrication steps, there are a few other areas that you should pay attention to:

Area	Recommended Lubrication
Air Filter	Apply a few drops of oil to the filter element.
Fuel Filter	Apply a small amount of grease to the O-rings.
Throttle Cable	Apply a light coating of grease to the cable.

Emptying Fuel and Oil Tanks

Before storing your lawn mower for an extended period, it’s crucial to empty both the fuel and oil tanks to prevent corrosion, gumming, and other issues that can arise from stagnant fluids.

Fuel Tank

Run the engine until it stops due to fuel starvation.
Disconnect the spark plug wire to prevent accidental starting.
Locate the fuel shut-off valve and close it.
Place a suitable container below the carburetor’s drain plug.
Open the drain plug and allow the fuel to drain into the container.

PRO TIP: If your lawn mower has a fuel stabilizer, add it to the fuel tank before running the engine to empty it. This will help prevent fuel degradation and preserve the fuel’s quality.

Oil Tank

Warm up the engine by running it for a few minutes.
Place a drain pan under the engine’s oil drain plug.
Use a wrench to carefully remove the drain plug.
Allow the oil to drain completely into the drain pan.
Once the oil flow slows down, tip the lawn mower slightly to drain any remaining oil.

Type of Oil	Disposal Method
Regular oil	Recyclable at local auto parts stores
Synthetic oil	May require special disposal procedures. Check with your local waste management authority.

Disconnecting Spark Plugs

Before storing your lawn mower, it’s crucial to disconnect the spark plugs. This simple step prevents accidental starting while the mower is in storage, ensuring safety and avoiding unnecessary wear on the engine components.

To disconnect the spark plugs:

Locate the spark plugs on the engine, usually near the top or side.
Using a spark plug wrench or socket, carefully remove the spark plugs by turning them counterclockwise.
Inspect the plugs for any damage or wear, such as cracked insulators or worn electrodes. If they need replacement, it’s a good time to do it before storage.
Store the spark plugs in a safe place where they won’t be lost or damaged.

Disconnecting Batteries

For electric lawn mowers or models with electric start capabilities, disconnecting the battery is essential.

To disconnect the battery:

Locate the battery on the mower, typically under the seat or in a designated battery compartment.
Identify the negative and positive terminals on the battery, usually marked with a “-” and “+” sign, respectively.
Using a wrench or socket, loosen the nut or bolt securing the negative terminal cable to the battery post.
Once the negative terminal is disconnected, carefully disconnect the positive terminal using the same method.
Store the battery in a cool, dry place where it won’t freeze or overheat.

Maintaining Battery Life During Storage

* For extended storage periods, it’s advisable to maintain the battery’s charge to prolong its lifespan. Here are some tips:

Battery Type	Maintenance
Lead-Acid	Store in a cool, dry place and recharge every 3-6 months
Lithium-Ion	Store in a cool, dry place and recharge every 6-12 months

Lifting and Storing the Mower Properly

To store your lawn mower safely and properly in your garage, follow these detailed steps:

1. Prepare the Mower for Storage

Clean the mower thoroughly and remove any grass clippings or debris. Drain the fuel tank completely and run the mower until it stalls. Disconnect the spark plug wire to prevent accidental starting.

2. Lift the Mower Safely

Use a hydraulic jack or a ramp to lift the mower off the ground. Ensure the mower is stable and secure before proceeding.

3. Drain the Oil

Replace the oil drain plug and tighten it securely.

4. Remove the Battery

Disconnect the battery terminals and remove the battery for storage in a cool, dry place.

5. Clean and Lubricate the Mower

Clean the mower’s exterior surfaces, removing any dirt or grime. Lubricate all moving parts, such as the blade spindle, wheel bearings, and deck.

6. Sharpen the Blade

Check the mower blade for dullness and sharpen it if necessary. A sharp blade will ensure better cutting performance next season.

7. Store the Mower Properly

Choose a dry and well-ventilated area in your garage to store the mower. Cover the mower with a tarp or protective cover to prevent dust and moisture accumulation. Consider the following table for additional storage tips:

Storage Tip	Description
Vertical Storage	Store the mower upright on its tailpipe to save space.
Wall-Mounted Storage	Use wall mounts or brackets to hang the mower vertically.
Platform Storage	Elevate the mower on a platform to protect it from water damage.

Protecting the Mower from Moisture and Debris

Moisture and debris can wreak havoc on your lawn mower, causing rust, corrosion, and other damage. To protect your mower from these elements, follow these steps:

1. Clean the Mower Thoroughly

Before storing your mower, give it a thorough cleaning to remove any dirt, grass clippings, or other debris. This will help prevent moisture from accumulating and causing rust.

2. Dry the Mower Completely

After cleaning your mower, allow it to dry completely before storing it. You can use a leaf blower or a clean cloth to speed up the drying process.

3. Apply a Rust Preventative

Once the mower is dry, apply a rust preventative to all metal surfaces. This will help protect the mower from moisture and corrosion.

4. Store the Mower in a Dry Place

The best way to protect your mower from moisture is to store it in a dry place. A garage or shed is ideal, but if you don’t have access to either of those, you can store the mower in a covered area, such as under a tarp.

5. Cover the Mower

If you’re storing the mower in a garage or shed, cover it with a tarp or lawn mower cover. This will help protect the mower from dust and debris.

6. Elevate the Mower

If possible, elevate the mower off the ground. This will help prevent moisture from accumulating on the bottom of the mower and causing rust.

7. Inspect the Mower Regularly

Even if you’ve taken all the necessary precautions, it’s still important to inspect your mower regularly for signs of moisture or damage. If you find any problems, address them immediately to prevent further damage.

8. Other Tips for Protecting Your Mower from Moisture and Debris

In addition to the steps outlined above, here are a few other tips for protecting your mower from moisture and debris:

Tip	Description
Use a moisture-absorbing material	Place a moisture-absorbing material, such as silica gel or rice, inside the mower housing to help absorb moisture.
Ventilate the storage area	If you’re storing the mower in a garage or shed, make sure the area is well-ventilated to prevent moisture from accumulating.
Check the mower before using	Before using the mower after storage, inspect it for any signs of moisture or damage. If you find any problems, address them immediately.

Spring Preparation for Lawn Mower Storage

To ensure a smooth start to the mowing season, it’s crucial to properly prepare your lawn mower for storage during the winter months. Here are some essential steps to follow:

Clean the Mower

Thoroughly clean the mower deck, body, and wheels to remove grass clippings, dirt, and debris. This will prevent corrosion and make it easier to inspect for any damage.

Oil Change

Change the oil in the mower according to the manufacturer’s recommendations. Fresh oil will lubricate the engine and prevent rust during storage.

Spark Plug Inspection

Inspect the spark plug and replace it if necessary. A faulty spark plug can lead to difficulty starting the mower when you need it.

Fuel Maintenance

Stabilize the fuel in the mower using a fuel stabilizer. This will prevent the fuel from varnishing and clogging the carburetor.

Sharpen Blades

Sharpen the mower blades to ensure a clean and efficient cut in the upcoming season. Dull blades will struggle to cut grass effectively.

Remove Battery

Remove the battery from the mower and store it in a cool, dry place. This will prevent the battery from losing its charge and prolong its life.

Inspect and Fix Any Damage

Inspect the mower carefully for any signs of damage or wear, such as loose or broken belts, damaged tires, or leaking oil. If any damage is found, address it before storing the mower.

Lubricate Moving Parts

Lubricate all moving parts, such as the blade spindle, wheels, and control cables, to prevent rust and ensure smooth operation.

Store in a Dry Location

Store the mower in a dry, protected location out of direct sunlight or extreme temperatures. Ideally, the mower should be stored in a shed or garage.

Cover the Mower

Cover the mower with a tarp or cover to protect it from dust and moisture. This will keep the mower clean and prevent corrosion.

Safety Precautions for Mower Storage

To ensure the safe storage of your lawn mower in the garage, it’s crucial to follow these precautions:

1. Disconnect the Spark Plug

Disconnecting the spark plug prevents the engine from starting accidentally. Remove the spark plug wire from the spark plug and secure it away from the engine.

2. Drain the Fuel Tank

Empty the fuel tank to prevent stale fuel from damaging the carburetor and other components. Use a fuel siphon or drain valve to remove the fuel into an approved fuel container.

3. Clean the Mower

Remove any grass clippings, debris, or dirt from the mower deck, undercarriage, and engine. Cleaning prevents moisture buildup and rust formation.

4. Lubricate Moving Parts

Apply a light coat of lubricant to moving parts such as the blades, wheels, and hinges. This reduces friction and wear during storage.

5. Change the Oil

Fresh oil helps protect engine components from corrosion. Drain the old oil and replace it with new oil according to the manufacturer’s recommendations.

6. Store Upright

If possible, store the mower upright on its wheels or on a stand. This prevents oil from pooling in the engine and cylinder.

7. Cover the Mower

Cover the mower with a tarp or lawn mower cover to protect it from dust, moisture, and pests.

8. Unplug the Battery

For electric mowers, disconnect the battery. This prevents the battery from discharging and extends its lifespan.

9. Store in a Dry Location

Choose a dry, well-ventilated area in the garage to store the mower. Avoid areas with extreme cold or heat, which can damage the engine and components.

10. Additional Maintenance Considerations

Depending on your local climate and storage duration, other maintenance tasks may be necessary. These may include:

Condition	Maintenance Task
Long-Term Storage (over 3 months)	Stabilize fuel, fog the cylinder, and replace air filter
Extreme Cold Conditions	Remove the battery and store indoors, drain the fuel tank and carburetor
High Humidity	Use a dehumidifier or place a desiccating agent near the mower

How To Store A Lawn Mower In The Garage

Storing your lawn mower in the garage is a great way to keep it protected from the elements and extend its lifespan. Here are a few tips on how to store your lawn mower in the garage:

Clean the lawn mower. Before storing your lawn mower, it is important to clean it thoroughly. This will remove any dirt, grass, or debris that could attract pests or cause corrosion.
Empty the fuel tank. If the lawn mower has a fuel tank, it is important to empty it before storing it. This will prevent spills and keep the fuel from evaporating.
Change the oil. Changing the oil in your lawn mower is an important part of maintenance. It is especially important to change the oil before storing the lawn mower for a long period of time.
Disconnect the battery. If the lawn mower has a battery, it is important to disconnect it before storing it. This will prevent the battery from draining and keep it from freezing.
Cover the lawn mower. Once the lawn mower is clean and prepared, it is important to cover it. This will protect it from dust and debris.