How to Safely Remove the Back Seat of a 2013 Buick Lacrosse
The 2013 Buick Lacrosse is a stylish and comfortable sedan, but there may come a time when you need to remove the back seat for cleaning, repairs, or to transport large items. The process is relatively straightforward and can be completed with a few simple tools. In this article, we’ll guide you through the steps on how to safely remove the back seat of your 2013 Buick Lacrosse.
Before you begin, gather the necessary tools: a Phillips head screwdriver, a flat head screwdriver, and a socket wrench set. You may also want to wear gloves to protect your hands. Once you have your tools and safety gear ready, you can start the removal process. First, locate the two child seat anchors at the base of the seat cushion. Use the Phillips head screwdriver to remove the bolts that secure the anchors. Next, use the flat head screwdriver to pry up the plastic trim pieces that cover the seat bolts. Once the trim pieces are removed, you will see four bolts that hold the seat cushion in place. Use the socket wrench to remove these bolts.
Now, lift the seat cushion up and over the seat back. Be careful not to damage the seat fabric as you do this. Once the seat cushion is removed, you will see two more bolts that secure the seat back to the floor. Use the socket wrench to remove these bolts, and then carefully lift the seat back out of the vehicle. The back seat of your 2013 Buick Lacrosse is now removed. You can now clean it, make repairs, or transport large items as needed. When you are finished, simply reverse the steps to reinstall the seat.
Detaching the Trunk Lid
To begin the process of detaching the trunk lid, you’ll need to gather a few essential tools: a Phillips head screwdriver, a flathead screwdriver, a socket wrench with a 10mm socket, and a trim removal tool. Once you have your tools assembled, follow these detailed steps to safely and effectively remove the trunk lid:
1. Unlocking and Opening the Trunk
Start by ensuring that your Buick Lacrosse is parked in a safe and stable location. Shift the vehicle into park and engage the parking brake to prevent any accidental movement. Locate the trunk release lever inside the vehicle and pull it to unlatch the trunk. Once the trunk is unlocked, lift the lid slightly to create a small gap.
Insert the flathead screwdriver into the gap between the trunk lid and the body of the car. Gently pry the lid upwards while simultaneously pulling the release lever again. The trunk lid should now be fully open, providing you with access to the interior.
| Phillips head screwdriver | Loosen the screws holding the taillights in place |
|---|---|
| Flathead screwdriver | Pry open the trunk lid |
| Socket wrench with 10mm socket | Remove the bolts securing the trunk lid to the hinges |
| Trim removal tool | Carefully detach the trim pieces around the trunk lid |
Removing the Trunk Trim
To begin removing the trunk trim, access the trunk and remove the plastic trim pieces near the taillights. Use a flathead screwdriver to detach the fasteners holding them in place.
Next, proceed to remove the rear seat. Fold down the seatback and locate the two bolts securing it to the floor. Remove these bolts and carefully lift out the seat. This provides access to the trunk trim’s upper mounting points.
Now, focus on the lower mounting points. Position your hands beneath the trunk trim and apply gentle pressure upwards to detach its clips from the retaining clips on the body. Work your way around the perimeter of the trim, carefully releasing all the clips. You may need a trim removal tool or a plastic pry bar to assist in this process. Once all the clips are detached, carefully lift the trunk trim upwards and remove it from the vehicle.
Disconnecting the Trunk Light Wiring
To disconnect the trunk light wiring, follow these steps:
- Locate the trunk light assembly. It is located on the underside of the trunk lid.
- Disconnect the electrical connector from the trunk light assembly.
- Remove the two screws that secure the trunk light assembly to the trunk lid. Carefully remove the trunk light assembly. When removing the trunk light assembly, be careful not to damage the wiring or the light assembly itself.
| Step | Description |
|---|---|
| 1 | Locate the trunk light assembly. It is located on the underside of the trunk lid. |
| 2 | Disconnect the electrical connector from the trunk light assembly. |
| 3 | Remove the two screws that secure the trunk light assembly to the trunk lid. Carefully remove the trunk light assembly. When removing the trunk light assembly, be careful not to damage the wiring or the light assembly itself. |
Removing the Quarter Panel Trim
Before you can remove the back of the Buick Lacrosse 2013, you need to remove the quarter panel trim. Here’s how to do it:
- Remove the two screws at the top of the quarter panel, and then remove the trim panel.
- Locate the two screws at the bottom of the quarter panel and remove them.
- Grip the quarter panel trim and gently pull it away from the body of the car.
- Disconnect the electrical connector for the license plate lights, which is attached to one of the trim clips.
**Trim Clip Type** **Removal Tool** Push-Type Trim Clip Removal Tool Screw-Type Phillips Screwdriver Spring-Type Flathead Screwdriver **Note:** Be careful not to damage the paint on the car when removing the trim panel.
Unbolting the Rear Bumper
To unbolt the rear bumper of a 2013 Buick Lacrosse, you will need a few basic tools, including a socket wrench, a Phillips head screwdriver, and a flathead screwdriver. Begin by disconnecting the negative terminal of the battery to avoid electrical shocks. Then, remove the four bolts that hold the bumper in place, two on each side. Next, use the Phillips head screwdriver to remove the four screws that hold the bumper to the trunk lid. Finally, use the flathead screwdriver to pry the bumper loose from the body of the car. Once the bumper is loose, you can carefully remove it from the car.
Here are the steps in more detail:
Step Description 1. Disconnect the negative terminal of the battery. 2. Remove the four bolts that hold the bumper in place, two on each side. 3. Use the Phillips head screwdriver to remove the four screws that hold the bumper to the trunk lid. 4. Use the flathead screwdriver to pry the bumper loose from the body of the car. 5. Carefully remove the bumper from the car. Once the bumper is removed, you can access the back of the car for repairs or maintenance.
Separating the Quarter Panel from the Bumper
To separate the quarter panel from the bumper, you will need to follow these steps:
- Locate the screws along the bottom of the bumper that attach it to the quarter panel. These screws are typically Torx head screws.
- Remove the screws using a Torx driver.
- Gently pull the bumper away from the quarter panel, starting at one corner and working your way around.
- Once the bumper is separated from the quarter panel, you can disconnect the electrical connectors for the taillights and license plate lights.
- Remove the turn signal lamps by pressing the tab on the back of the lamp and pulling the lamp out.
- Now you need to remove the rear bumper reinforcement. The reinforcement is attached to the quarter panels with bolts. Locate the bolts and remove them using a wrench or socket. Once the bolts are removed, you can pull the reinforcement away from the quarter panels.
- With the reinforcement removed, you can now access the nuts that attach the quarter panel to the body of the car. Remove the nuts using a wrench or socket.
- Once the nuts are removed, you can carefully pull the quarter panel away from the body of the car.
Screw Size Quantity Location T25 Torx 4 Bottom of the bumper Disengaging the Quarter Panel from the Body
7. Unplug the Tail Light Assembly
Locate the tail light assembly at the rear of the quarter panel. It is typically secured by a few bolts or screws. Remove the bolts or screws to release the assembly.
Once the assembly is loose, carefully pull it away from the quarter panel. Be cautious not to damage the wiring or the assembly itself.
Disconnect the electrical connector that powers the tail light assembly. This connector is usually located behind the assembly or near the edge of the quarter panel.
Step Description 1 Locate the tail light assembly on the rear of the quarter panel. 2 Remove the bolts or screws securing the assembly. 3 Carefully pull the assembly away from the quarter panel. 4 Disconnect the electrical connector that powers the assembly. Removing the Back Panel
To remove the back panel of a 2013 Buick Lacrosse, follow these steps:
1. Open the Trunk
Locate the trunk release lever inside the vehicle and pull it to open the trunk.
2. Remove the Side Panels
On each side of the trunk, locate the plastic side panels that cover the taillights. Use a trim removal tool or a flat-head screwdriver to gently pry the panels off.
3. Disconnect the Electrical Connectors
Once the side panels are removed, you will see the electrical connectors for the taillights. Disconnect these connectors by pressing the tabs on the side and pulling them apart.
4. Remove the Taillights
Locate the two bolts that hold each taillight in place. Use a socket wrench or a box wrench to remove the bolts. Once the bolts are removed, carefully pull the taillights straight out of their sockets.
5. Remove the Trunk Lid Garnish
In the center of the trunk lid, locate the plastic garnish that covers the license plate light. This garnish is held in place by two clips. Use a flat-head screwdriver or a trim removal tool to carefully pry the garnish off.
6. Remove the License Plate Light
Once the trunk lid garnish is removed, you will see the license plate light. To remove the light, use a flat-head screwdriver or a trim removal tool to gently pry the light out of its housing.
7. Remove the Trunk Lid Support Struts
On each side of the trunk lid, locate the two support struts that hold the lid open. Use a socket wrench or a box wrench to remove the bolts that hold the struts in place. Once the bolts are removed, lift the trunk lid slightly and remove the struts.
8. Remove the Trunk Lid Weatherstripping
Around the perimeter of the trunk lid, locate the rubber weatherstripping. This weatherstripping is held in place by a series of clips. Use a flat-head screwdriver or a trim removal tool to carefully pry the weatherstripping off.
9. Remove the Trunk Lid
Once the weatherstripping is removed, the trunk lid is now free to be removed. Lift the trunk lid slightly and carefully pull it straight up and off the vehicle.
10. Disconnect the Backup Camera
If your 2013 Buick Lacrosse is equipped with a backup camera, you will need to disconnect it before removing the back panel. The backup camera is located in the center of the back panel. To disconnect it, use a flat-head screwdriver or a trim removal tool to carefully pry the camera out of its housing. Then, disconnect the electrical connector from the back of the camera.
Step Description 1 Remove the side panels 2 Disconnect the electrical connectors 3 Remove the taillights 4 Remove the trunk lid garnish 5 Remove the license plate light 6 Remove the trunk lid support struts 7 Remove the trunk lid weatherstripping 8 Remove the trunk lid 9 Disconnect the backup camera (if equipped) How To Take Off The Back Of Buick Lacrosse 2013
Tools Needed:
- 10mm socket wrench
- Flathead screwdriver
Instructions:
- Open the trunk.
- Locate the two 10mm bolts on the top of the trunk lid.
- Remove the bolts.
- Locate the two plastic clips on the bottom of the trunk lid.
- Use a flathead screwdriver to pry the clips open.
- Lift the trunk lid off of the car.
People Also Ask About How To Take Off The Back Of Buick Lacrosse 2013
How do I remove the back seat of a 2013 Buick Lacrosse?
Tools Needed:
- 13mm socket wrench
- Flathead screwdriver
Instructions:
- Fold down the back seat.
- Remove the two 13mm bolts on the bottom of the seat.
- Locate the two plastic clips on the side of the seat.
- Use a flathead screwdriver to pry the clips open.
- Lift the seat up and out of the car.
How do I remove the rear bumper of a 2013 Buick Lacrosse?
Tools Needed:
- 10mm socket wrench
- 15mm socket wrench
- Phillips head screwdriver
Instructions:
- Open the trunk.
- Remove the two 10mm bolts on the top of the rear bumper.
- Remove the two 15mm bolts on the bottom of the rear bumper.
- Locate the two Phillips head screws on each side of the rear bumper.
- Remove the screws.
- Carefully pull the rear bumper off of the car.
