Are you tired of fumbling with your spinnerbait every time you go fishing? Do you wish there was an easier way to tie it on that would ensure a secure hold and optimal performance? Look no further! In this comprehensive guide, we’ll walk you through the step-by-step process of how to tie on a spinnerbait like a pro. Whether you’re a seasoned angler or just starting out, this foolproof method will have you fishing with confidence in no time.
Before we dive into the tying process, let’s gather the necessary materials. You’ll need a spinnerbait, a fishing line, and a pair of pliers or scissors. Once you have everything you need, find a comfortable spot and follow these easy steps:
First, pass the fishing line through the eye of the spinnerbait. Next, create a small loop at the end of the line. Then, pass the loop through the eye of the spinnerbait again, creating a double loop. Now, take the end of the line and pass it through the double loop. Finally, pull the end of the line to tighten the knot. Congratulations! You’ve successfully tied on your spinnerbait. To ensure a secure hold, be sure to trim any excess line and double-check the knot before casting.
Preparation for Spinner Bait Assembly
Selecting the Right Spinner Bait
Before you begin assembling your spinner bait, it’s crucial to select the right one for your fishing needs. Consider the size, weight, and blade type that aligns with the species of fish you’re targeting and the water conditions you’ll encounter. Make sure the hooks are sharp and properly set before proceeding with the assembly process.
Gathering Necessary Materials
Create a designated workspace and gather all the necessary materials:
| Materials |
|---|
| Spinner bait |
| Fishing line (braided or monofilament) |
| Swivel (optional) |
| Needle-nose pliers |
| Scissors |
Preparing the Fishing Line
If you’re using braided line, consider tying a fluorocarbon leader to the end to reduce visibility underwater. For monofilament line, simply cut a section of the desired length, leaving enough to tie the bait to the swivel and to the fishing line.
Attaching the Hook and Weight
The hook is the most important part of the spinnerbait, as it is what the fish will bite onto. The ideal hook size for a spinnerbait will vary depending on the size of the fish you are targeting, but a size 2 or 3 hook is a good starting point. The weight of the spinnerbait will also affect how it swims, with a heavier weight causing it to sink faster and a lighter weight causing it to float more. A 1/4-ounce weight is a good all-around weight for a spinnerbait.
Step-by-Step Instructions
Attaching the Hook
1. Pass the hook through the eye of the spinnerbait’s head.
2. Double back the hook and pass it through the eye again, leaving a small loop.
3. Tighten the loop by pulling on the tag end of the hook.
4. Trim the excess tag end of the hook.
Attaching the Weight
1. Pass the weight through the loop on the spinnerbait’s head.
2. Tighten the weight by pulling on the tag end of the weight.
3. Trim the excess tag end of the weight.
Additional Tips
1. You can also attach a trailer hook to the spinnerbait, which can increase your chances of catching a fish.
2. The color of the spinnerbait can also affect its effectiveness. Bright colors like red and yellow can be more visible to fish in clear water, while darker colors like black and brown can be more effective in murky water.
3. The speed at which you retrieve the spinnerbait can also affect its effectiveness. A slow retrieve can be more effective in cold water, while a fast retrieve can be more effective in warm water.
Connecting the Skirt
The skirt is an essential component of a spinner bait, providing flash and attraction to entice fish. To attach the skirt, follow these steps:
- Choose the Right Skirt Length: Determine the desired length and style of skirt for your spinner bait. Shorter skirts create a more compact profile, while longer skirts add flare and generate more movement.
- Thread the Skirt onto the Wire: Slide the skirt onto the spinner bait’s wire arm, starting from the rear hook and working towards the front hook.
- Secure the Skirt with Thread: Tie a small piece of thread (typically monofilament or fluorocarbon) around the skirt at the rear hook. Wrap the thread around the skirt several times and secure it with a double knot. Trim any excess thread.
- Adjust the Skirt Placement: Slide the skirt forward or backward on the wire arm to achieve the desired position. The skirt should be slightly flared or curved to add movement.
- Trimming the Skirt: Once the skirt is positioned, trim any excess material. Use scissors to cut the skirt evenly around the circumference, leaving a clean and symmetrical appearance.
Skirt Length and Style Options:
| Length | Style |
|---|---|
| Short | Round, cupped |
| Medium | Willow leaf, Indiana |
| Long | Teardrop, willow |
Positioning the Spinner Blades
The positioning of the spinner blades is crucial for the spinnerbait’s action and effectiveness in the water. The blades create vibration and flash, which attracts fish. The blades are typically attached to the wire arm of the spinnerbait, with a small bead separating them. The distance between the blades and the weight of the spinnerbait affect the action.
Distance Between Blades
The distance between the spinner blades affects the frequency and amplitude of the vibration. A larger distance creates a wider, more pronounced vibration, while a smaller distance creates a tighter, more rapid vibration. The optimal distance depends on the size of the spinnerbait, the size of the target fish species, and the water conditions.
Blade Weight
The weight of the spinner blades affects the action and speed of the spinnerbait. Heavier blades create a slower, more subtle action, while lighter blades create a faster, more aggressive action. The weight of the blades should be matched to the size of the spinnerbait and the target fish species.
Blade Weight Chart
| Blade Size | Weight | Action |
|---|---|---|
| 1/2 oz | 0.5 oz | Slow, subtle |
| 3/4 oz | 0.75 oz | Moderate |
| 1 oz | 1.0 oz | Fast, aggressive |
Securing the Blades with Beads
To create a secure connection between the spinner blades and the line, beads are essential. Here’s a detailed step-by-step guide on how to effectively secure the blades using beads:
- Thread the bead onto the line: Slide a bead onto the fishing line, leaving a few inches of line between the bead and the spinnerbait.
- Attach the spinnerblade to the line: Insert the spinnerblade onto the fishing line, ensuring that the blade’s wire loop is facing towards the bead.
- Position the bead over the wire loop: Slide the bead over the wire loop of the spinnerblade until it rests against the blade’s base.
- Crimp the bead: Using a pair of pliers, gently squeeze the bead to create a tight and secure connection between the bead and the wire loop. The bead will form a collar around the wire loop, preventing it from slipping off.
- Slide the next bead onto the line: Repeat steps 1-4 to add another bead to the line, positioning it a few inches behind the first bead. This additional bead creates a cushion between the spinnerblade and the knot, protecting the knot from wear and tear.
- Tie the fishing knot: Tie a secure fishing knot using the remaining line, such as a Palomar knot or a Clinch knot. The knot should be tied as close to the second bead as possible without damaging the bead.
By following these steps carefully, you can effectively secure the spinner blades with beads, ensuring a strong and reliable connection that will withstand the rigors of casting and retrieving.
Attaching a Trailer Hook
A trailer hook is an additional hook that can be attached to the back of a spinnerbait. It is typically used to increase the chances of catching a fish. To attach a trailer hook, follow these steps:
1.
Choose a trailer hook that is the appropriate size for the spinnerbait. The hook should be large enough to catch the fish, but not so large that it impairs the spinnerbait’s action.
2.
Tie the trailer hook to the spinnerbait using a knot that is strong and secure. The most common knot used to attach a trailer hook is the Palomar knot.
3.
Position the trailer hook so that it is pointing straight back. The hook should be positioned slightly above the spinnerbait’s blades.
4.
Secure the trailer hook with a small amount of super glue. This will help to keep the hook in place and prevent it from coming loose.
5.
Test the trailer hook to make sure that it is secure and that it does not interfere with the spinnerbait’s action.
6.
Tips for Attaching a Trailer Hook
Here are a few tips for attaching a trailer hook to a spinnerbait:
| Tip | Description |
|---|---|
| Use a sharp hook | A sharp hook will be more likely to penetrate the fish’s mouth. |
| Tie the hook securely | A securely tied hook will be less likely to come loose and lose the fish. |
| Position the hook correctly | The hook should be positioned so that it is pointing straight back and slightly above the spinnerbait’s blades. |
| Secure the hook with super glue | Super glue will help to keep the hook in place and prevent it from coming loose. |
| Test the hook | Before using the spinnerbait, test the hook to make sure that it is secure and that it does not interfere with the spinnerbait’s action. |
Using a Colorado or Indiana Blade
When fishing with a spinnerbait, you can choose between a Colorado blade or an Indiana blade. The Colorado blade is rounder and has a larger surface area. It creates more vibration and flash than the Indiana blade, which is more oval-shaped and has a smaller surface area.
The Colorado blade is a good choice for fishing in clear water or when the fish are inactive. The Indiana blade is a good choice for fishing in stained water or when the fish are active.
To tie on a spinnerbait with a Colorado or Indiana blade, follow these steps:
1. Pass the line through the eye of the blade.
2. Bring the line back up through the eye of the blade.
3. Pass the line through the loop formed by your first two wraps.
4. Pull the line tight to form the knot.
5. Repeat steps 2-4 for the second blade.
6. Tie a hook to the line below the blades.
7. Use a snap swivel to attach the spinnerbait to your line.
Here are some tips for tying on a spinnerbait:
| Tip | Description |
|---|---|
| Use a sharp line. | This will help you to easily cut through the line and tie the knot. |
| Don’t overtighten the knot. | This can weaken the line and cause it to break. |
| Use a snap swivel. | This will help to keep your spinnerbait from twisting your line. |
Choosing the Right Blade Size
The size of the blade will determine the depth and speed at which the spinnerbait will run. Smaller blades will run shallower and faster, while larger blades will run deeper and slower.
The following table provides a general guide to choosing the right blade size for your fishing conditions:
| Blade Size | Depth | Speed |
|---|---|---|
| 1/8 oz | 0-5 ft | Fast |
| 1/4 oz | 5-10 ft | Medium |
| 3/8 oz | 10-15 ft | Slow |
| 1/2 oz | 15-20 ft | Very slow |
Keep in mind that these are just general guidelines. The best way to determine the right blade size for your fishing conditions is to experiment with different sizes until you find what works best.
Here are some additional tips for choosing the right blade size:
- For clear water, use smaller blades.
- For murky water, use larger blades.
- For fast-moving water, use smaller blades.
- For slow-moving water, use larger blades.
Selecting the Spinner Arm Length
The length of the spinner arm determines how far the blade will extend away from the body of the bait, which in turn affects the action of the blade and the overall effectiveness of the bait. Here’s a detailed guide to choosing the right spinner arm length:
Blade size and shape:
The size and shape of the blade will influence the arm length you need. Smaller blades, such as willowleaf or Indiana blades, will require a shorter arm length than larger blades, such as Colorado or French blades. Wider blades (e.g., willowleaf, Colorado) also generally need shorter arms to prevent fouling.
Target species:
The fish you’re targeting will also impact your arm length choice. For example, largemouth bass tend to prefer faster-moving baits with shorter arms, while smallmouth bass often prefer slower-moving baits with longer arms.
Water clarity and current:
In clear water, shorter arms are generally more effective, as the blade will create less flash and vibration. In murky water or strong currents, longer arms can help create more noise and visibility to attract fish.
Depth and cover:
If you’re fishing shallow water or areas with heavy cover, a shorter arm length will help prevent the blade from snagging or fouling on obstacles.
| Blade Size | Arm Length |
|---|---|
| Small (0-2) | 1/4 – 1/2 inch |
| Medium (2-4) | 1/2 – 3/4 inch |
| Large (4-6) | 3/4 – 1 inch |
| Extra Large (6+) | 1+ inch |
Step 1: Attach the line to the swivel
Begin by passing the fishing line through the eye of the spinnerbait’s swivel. Tie a Palomar knot or improved clinch knot to securely attach the line to the swivel.
Step 2: Thread the line through the hook eye
Next, pass the line through the hook eye located at the bottom of the spinnerbait. This will create a loop that will hold the hook in place.
Step 3: Wrap the line around the hook shank
Take the line and wrap it around the hook shank 5-6 times, making sure to keep the wraps tight.
Step 4: Pass the line through the loop
Now, pass the line end through the loop that was created in step 2. Pull on the line to tighten the wraps and secure the hook.
Step 5: Tie off the line
Finish the knot by tying a clinch knot or Palomar knot to securely attach the line to the hook. Trim any excess line.
Additional Tips for Optimal Performance
Length
Adjust the length of your leader based on water clarity and depth. A shorter leader (2-3 feet) is preferred in clear water, while a longer leader (4-5 feet) is better for murky water or deep water fishing.
Weight
Choose the weight of your spinnerbait according to the depth and current of the water. Heavier spinnerbaits sink faster and are suitable for deeper water or strong currents.
Blade Type
The type of blade you choose will affect the action and vibration of the spinnerbait. Colorado blades produce a wider, slower wobble, while Indiana blades create a tighter, faster vibration.
Blade Color
Match the color of your blade to the water conditions and target species. Silver or gold blades are good all-around choices, while chartreuse or white blades are effective in stained water.
Hook Size
Select a hook size appropriate for the size of the fish you are targeting. Smaller hooks (size 4-6) are suitable for panfish and bass, while larger hooks (size 1-2) are better for pike or muskie.
Trailer
Adding a soft plastic trailer to your spinnerbait can increase its effectiveness. Trailers can provide additional color, vibration, and scent to attract fish.
Weed Guard
Consider using a weed guard if you are fishing in weedy or vegetation-filled areas. A weed guard will help prevent the spinnerbait from becoming snagged.
Retrieve
The retrieve speed and technique can greatly impact the effectiveness of your spinnerbait. Experiment with different speeds and styles to find what works best for the conditions and target species.
Keep It Clean
Clean your spinnerbait regularly to remove any dirt, debris, or algae that may accumulate on the blades or hook. A dirty spinnerbait will not perform as well as a clean one.
How to Tie on a Spinner Bait
Spinnerbaits are one of the most versatile lures used in fishing. They can be used to catch a variety of fish, from bass to walleye to pike. Spinnerbaits are also relatively easy to tie on, which makes them a great option for beginning anglers.
To tie on a spinnerbait, start by passing the line through the eye of the lure. Then, tie a Palomar knot or a Trilene knot. Trim the tag end of the line, and you are ready to start fishing.
People Also Ask
What size line should I use for a spinnerbait?
The line size you use for a spinnerbait will depend on the size of the lure and the fish you are targeting. For small spinnerbaits, you can use a 10-pound test line. For larger spinnerbaits, you can use a 12- to 15-pound test line.
What type of knot should I use to tie on a spinnerbait?
There are two knots that are commonly used to tie on a spinnerbait: the Palomar knot and the Trilene knot. Both of these knots are easy to tie and will create a strong connection between the line and the lure.
How do I choose the right spinnerbait for the fish I am targeting?
The spinnerbait you choose will depend on the depth of the water you are fishing, the speed of the retrieve, and the size of the fish you are targeting. For fishing in shallow water, use a spinnerbait with a small blade. For fishing in deeper water, use a spinnerbait with a larger blade. For fishing at a slow speed, use a spinnerbait with a single blade. For fishing at a fast speed, use a spinnerbait with multiple blades.
