Attention all Steelcase Leap V1 owners, or aspiring owners! If you’ve been yearning to modify your ergonomic masterpiece by removing its armrests, you’ve come to the right place. Brace yourselves for a seamless guide that will empower you to enhance your Leap V1 experience and tailor it to your unique preferences. Let’s dive right into the intricacies of removing these armrests with precision and efficiency.
Before we embark on this endeavor, it’s crucial to acknowledge that removing the armrests is a permanent modification. Once detached, they cannot be reattached to the chair. Therefore, it’s imperative to carefully consider your decision and ensure that you’re comfortable with this irreversible alteration. With that in mind, let’s proceed with the step-by-step instructions that will guide you through the process.
Firstly, you’ll need to gather the necessary tools for the task: a 4mm Allen wrench and a flat-head screwdriver. With these tools in hand, you can begin by flipping the chair upside down. This will provide you with clear access to the underside of the seat, where the armrests are attached. Locate the four screws that secure each armrest to the seat and use the Allen wrench to loosen them. Once the screws are removed, you can gently lift the armrest away from the seat. Repeat this process for the other armrest, and voila! You’ve successfully removed the armrests from your Steelcase Leap V1, unlocking a new level of customization.
Removing the Armrest Pivot Pin
Start by locating the small hole on the bottom of the armrest, near the elbow. Insert a paperclip or a small Allen key into the hole and press down on it. This will release the pressure on the pivot pin, allowing you to remove it.
Step-by-Step Instructions:
- Locate the small hole on the bottom of the armrest, near the elbow.
- Insert a paperclip or a small Allen key into the hole and press down on it to release the pressure on the pivot pin.
- Using pliers or a screwdriver, carefully pry the pivot pin out of the hole.
- Once the pivot pin is removed, you can lift the armrest off of the chair.
Lifting the Armrest Off
1. Locate and depress the release button. There are two release buttons on each armrest, one on the inside and one on the outside. Use your fingers or a small screwdriver to depress both buttons simultaneously.
2. Grip the armrest and pull it straight up. Do not twist or bend the armrest, as this could damage it. Once the armrest is loose, you can lift it straight up and off the chair.
3. Remove the armrest cover. Once the armrest is off, remove the cover by unscrewing the two screws on the bottom. This will expose the armrest adjustment mechanism.
4. Adjust the armrest height. The armrest height can be adjusted by turning the adjustment screw on the bottom of the armrest. Turn the screw clockwise to raise the armrest and counterclockwise to lower it.
5. Reattach the armrest. Once the armrest is adjusted to the desired height, reattach it to the chair by reversing the steps above. Put the cover back into place and tighten the screws. Finally, press down on the armrest to re-engage the release buttons.
| Armrest Adjustment Screw | Function |
|---|---|
| Adjust screw | Adjusts the armrest height |
| +/- signs | Indicates the direction to turn the screw to raise or lower the armrest |
| Lock nut | Locks the adjustment screw in place once the desired height is set |
Sliding the Armrest Back into Place
Now it’s time to put the armrest back in place. Sliding the armrest back into place requires a little bit of force, but be careful not to damage the armrest or the chair. To slide the armrest back into place, follow these steps:
- Align the armrest with the mounting bracket: Make sure that the armrest is aligned with the mounting bracket on the chair.
- Apply pressure: Apply pressure to the armrest and slide it back into place. Use your body weight to help if necessary.
- Slide the armrest all the way back: Slide the armrest all the way back until it clicks into place.
- Test the armrest: Once the armrest is in place, test it to make sure that it is secure and moves smoothly.
- Repeat for the other armrest: If you are removing both armrests, repeat the process for the other armrest.
- Tighten the screws: If the armrests are loose, tighten the screws on the mounting brackets.
- Enjoy your chair! You have now successfully removed and replaced the armrests on your Steelcase Leap V1 chair.
Steelcase Leap V1 How To Remove Armrest
The Steelcase Leap V1 is a high-performance office chair designed to provide exceptional comfort and support. One of the features that makes the Leap V1 so popular is its adjustable armrests. These armrests can be removed to customize the chair to your specific needs. Removing the armrests is a simple process that can be completed in just a few minutes.
To remove the armrests, first loosen the screws that secure them to the chair. These screws are located on the underside of the armrests. Once the screws are loose, you can gently pull the armrests away from the chair. Be careful not to damage the chair or the armrests when doing so.
Once the armrests are removed, you can customize the chair to your specific needs. You can adjust the seat height, backrest angle, and lumbar support to find the perfect position for your body. You can also use the Leap V1 without armrests if you prefer.
People Also Ask About Steelcase Leap V1 How To Remove Armrest
How do I remove the armrests on my Steelcase Leap V1 chair?
To remove the armrests on your Steelcase Leap V1 chair, first loosen the screws that secure them to the chair. These screws are located on the underside of the armrests. Once the screws are loose, you can gently pull the armrests away from the chair. Be careful not to damage the chair or the armrests when doing so.
Can I use my Leap V1 chair without armrests?
Yes, you can use your Leap V1 chair without armrests. However, some people find that armrests provide additional comfort and support. If you are unsure whether you need armrests, you can try using your chair with and without them to see which is more comfortable for you.
How do I adjust the armrests on my Leap V1 chair?
To adjust the armrests on your Leap V1 chair, first loosen the screws that secure them to the chair. These screws are located on the underside of the armrests. Once the screws are loose, you can adjust the armrests up, down, forward, or back to find the perfect position for your body. Once you have adjusted the armrests, tighten the screws to secure them in place.
